steam enters a turbine at 1000 psia and 1000 degrees celsius, and leaves at 5Psia and 97% quality, the turbine is adiabatic and the power output is 25000 hp.
Calculate:
1- the work of the turbine ( in btv/lbm)
2- the mass flow rate in lbm/s, if the work of the turbine is 353.399 btv/lbm
3- the inlet diameter, if the mass flow rate is 60 lbm/s
NOTE: inlet velocity ≈ exit velocity =80 ft/s
1hp=2545 btv/hr
Homework Answers
Add Answer to:
steam enters a turbine at 1000 psia and 1000 degrees celsius,
and leaves at 5Psia and...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
A ship's steam turbine receives 7200 lbm/min of steam at pressure of 900psia and a velocity...
A ship's steam turbine receives 7200 lbm/min of steam at pressure of 900psia and a velocity of 100ft/s. The steam leaves the turbine at 450 psia with a velocity of 800 ft/s. Specific enthalpy at the inlet and exit, respectively, are 1508.9 Btu/lbm and 1238.5 Btu/lbm. As the steam passes through turbine 12 Btu/lbm of heat is lost to the environment. a) Using the Steady Flow Energy Equation, determine the specific work generated by this turbine. (Btu/lbm) b) Determine the...
(30 pts.) 3) Steam enters an adiabatic turbine at 1400 psia and 1000 F at a...
(30 pts.) 3) Steam enters an adiabatic turbine at 1400 psia and 1000 F at a flow rate of 31.5 cfm. It exits at a quality of 90% and a pressure of 1 psia. Neglect kinetic and potential energy effects. a) Determine the power produced [hp] b) Draw P-v and T-v state diagrams showing the states and process.
10. (25 Points) Steam enters an insulated nozzle at 140 psia, 600 F with a velocity...
10. (25 Points) Steam enters an insulated nozzle at 140 psia, 600 F with a velocity of 100 ft/s. It leaves the nozzle at 20 psia, 360°F. The mass flow rate is 10 lbm/s. Find: Ans a) b) Ans. The actual kinetic energy of the steam at the exit, in Btu The exit velocity in ft/s for part a) The exit cross sectional area of the nozzle, in in The nozzle isentropic efficiency (%) Show the actual and the ideal...
14. Steam enters an adiabatic turbine at 1,000 psia and 900°F and leaves at 3 psia....
14. Steam enters an adiabatic turbine at 1,000 psia and 900°F and leaves at 3 psia. The turbine efficiency is 80%. The steady-state specific work (Btumn) developed by the turbine is most nearly (a) 290 (b) 325 (e)390 (d)409 (e) 490
Steam enters a turbine operating at steady state at 700oF and 450 lbf/in2 and leaves as...
Steam enters a turbine operating at steady state at 700oF and 450 lbf/in2 and leaves as a saturated vapor at 0.8 lbf/in2. The turbine develops 12,000 hp, and heat transfer from the turbine to the surroundings occurs at a rate of 2 x 106 Btu/h. Neglect kinetic and potential energy changes from inlet to exit. Determine the exit temperature, in oF, and the volumetric flow rate of the steam at the inlet, in ft3/s.
The axial flow steam turbine rotor shown in Fig. P12.69 has a blade outer radius RO 2.40 ft, a blade inner radius Ri 2.00 ft, a steam inlet pressure p1 200 psia, a steam inlet density p1- 0.296 lbm/t...
The axial flow steam turbine rotor shown in Fig. P12.69 has a blade outer radius RO 2.40 ft, a blade inner radius Ri 2.00 ft, a steam inlet pressure p1 200 psia, a steam inlet density p1- 0.296 lbm/t3, and an inlet absolute velocity V1 1000 f/s making an angle of 70° with the axial direction. The steam outlet pressure p2 50 psia and outlet density is 0.1014 Ibm/t3. B2 40 The rotor rotates at 3600 rpm. Using a blade...
Problem 4 A steam turbine is used to generate power. The turbine expansion process is "adiabatic,"...
Problem 4 A steam turbine is used to generate power. The turbine expansion process is "adiabatic," this means that there is no heat transfer during this process. The inlet and exit conditions are listed below T1 = 600-degF P2 10-psia T2 1932-degF x2 0.9 P1 500-psia BTU lb Adiabatio Steam Turbine h1:= 1299.1·ww s1 1.5652. BTU b-R Qloss 0 BTU lb At 10 psia, BTU h,-1143.3- BTU BTU lb s,-1.788-en lb-R hr:= 161.2- S(30-2836. A. Determine the work of the...
1) Steam at 200 psia and 600 F is supplied to a turbine and exhausted at...
1) Steam at 200 psia and 600 F is supplied to a turbine and exhausted at 14.7 psia. The flow is adiabatic, the power output of the turbine is 10000 kW and it's isentropic efficiency is 65 %. Determine the steam rate in lbm/h.
NO INTERPOLATION REQUIRED Air enters an adiabatic turbine at 1000 kPa and 1625 degrees C (state...
NO INTERPOLATION REQUIRED Air enters an adiabatic turbine at 1000 kPa and 1625 degrees C (state 1) with a mass flow rate of 5 kg/s and leaves at 100 kPa the isentropic efficiency of the turbine is 85%. Neglecting the kinetic energy change of the steam, and considering variable specific heats, determine: a. the isentropic power of the turbine Isentropic power in kW b. the temperature at the turbine exit temperature at exit in degrees C c. the actual power...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
(30 pts.) 3) Steam enters an adiabatic turbine at 1400 psia and 1000 F at a flow rate of 31.5 cfm. It exits at a quality of 90% and a pressure of 1 psia. Neglect kinetic and potential energy effects. a) Determine the power produced [hp] b) Draw P-v and T-v state diagrams showing the states and process.
10. (25 Points) Steam enters an insulated nozzle at 140 psia, 600 F with a velocity of 100 ft/s. It leaves the nozzle at 20 psia, 360°F. The mass flow rate is 10 lbm/s. Find: Ans a) b) Ans. The actual kinetic energy of the steam at the exit, in Btu The exit velocity in ft/s for part a) The exit cross sectional area of the nozzle, in in The nozzle isentropic efficiency (%) Show the actual and the ideal...
14. Steam enters an adiabatic turbine at 1,000 psia and 900°F and leaves at 3 psia. The turbine efficiency is 80%. The steady-state specific work (Btumn) developed by the turbine is most nearly (a) 290 (b) 325 (e)390 (d)409 (e) 490
The axial flow steam turbine rotor shown in Fig. P12.69 has a blade outer radius RO 2.40 ft, a blade inner radius Ri 2.00 ft, a steam inlet pressure p1 200 psia, a steam inlet density p1- 0.296 lbm/t3, and an inlet absolute velocity V1 1000 f/s making an angle of 70° with the axial direction. The steam outlet pressure p2 50 psia and outlet density is 0.1014 Ibm/t3. B2 40 The rotor rotates at 3600 rpm. Using a blade...
Problem 4 A steam turbine is used to generate power. The turbine expansion process is "adiabatic," this means that there is no heat transfer during this process. The inlet and exit conditions are listed below T1 = 600-degF P2 10-psia T2 1932-degF x2 0.9 P1 500-psia BTU lb Adiabatio Steam Turbine h1:= 1299.1·ww s1 1.5652. BTU b-R Qloss 0 BTU lb At 10 psia, BTU h,-1143.3- BTU BTU lb s,-1.788-en lb-R hr:= 161.2- S(30-2836. A. Determine the work of the...
1) Steam at 200 psia and 600 F is supplied to a turbine and exhausted at 14.7 psia. The flow is adiabatic, the power output of the turbine is 10000 kW and it's isentropic efficiency is 65 %. Determine the steam rate in lbm/h.
Most questions answered within 3 hours.
-
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 41 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 57 minutes ago -
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 39 minutes ago -
Assuming you are the head of the software development unit at
Cyber.Soft, explain and justify why...
asked 5 minutes ago -
Magnesium and nitrogen react in a combination reaction to
produce magnesium nitride. 3 Mg + N2...
asked 13 minutes ago -
Two electrons are initially at rest separated by a distance of
2nm. At time t=0, they...
asked 11 minutes ago -
A martial artist is practicing breaking 5 boards. He is able to
break aboard with probability...
asked 18 minutes ago -
The rate constant of a first-order reaction is 2.95 × 10−4 s−1
at 350.° C. If...
asked 21 minutes ago -
implement a class called PiggyBank that will be used to
represent a collection of coins. Functionality...
asked 12 minutes ago -
2. Use the following information in the table to answer the
following questions. (Numbers are in...
asked 18 minutes ago -
The fuel economy of a 2011 Lexus RX 350 2wd 6 cylinder 3.5 L
automatic 5...
asked 26 minutes ago -
i.
the synthesized compund 2-bromo-butanal i have a IR peak at about
3200 and one at...
asked 26 minutes ago