9. Given that water contains 10 mg/L of bicarbonate at pH 5, what is the alkalinity...
A water sample contains a 4:1 molar ratio of bicarbonate to carbonate at a pH of 8.5. The alkalinity of the sample is 75 mg/L as CaCO3. Determine the mg/L values of bicarbonate and carbonate in the solution.
A water with a pH of 9.0 contains 20 mg/L CO3-2 and 55 mg/L HCO3-. Calculate the alkalinity of the water expressed as meq/L (milli equivalents per liter) and as mg/L as CaCO3.
A solution has a pH of 7.3 and an alkalinity of 25 mg/L as CaCO3. Essentially all the alkalinity is contributed by the carbonate system. The water also contains 10^(-4) M Fe2+ (5.5 mg Fe2+/L). To remove the iron, oxygen is injected into the solution, converting the Fe2+ to Fe3+; the Fe3+ then precipitates as ferric hydroxide according to the following reaction: Fe2+ 1/4O2 + 2.5H20 -> Fe(OH)3 + 2H+. Calculate the pH of water after the reactions are complete....
2. Determine the approximate alkalinity (in mg/L as CaCO3) for a water which has 127.3 mg/L of bicarbonate ions and 18.5 mg/L of carbonate ions.
A student is running a titration in the laboratory to determine the alkalinity (Total, bicarbonate and carbonate, hydroxide) of a drinking water sample. The initial pH of the sample is 11.6; 0.02N H2SO4 is used as the titrant; and the sample volume subjected to the titration is 100 mL (0.1L). The results of the titrations were as follows: 18.3 (volume of titrant to drop the pH from 11.6 to 8.3) = 10.0 mL; V4.5 (volume of titrant to drop the...
. A water sample has the following constituents Ca, mg/L 12 Mg-2, mg/L39 Na mg/L 12.8 K-, mg/L 3.4 Fe-, mg/L6.2 Mn-, mg/L 0.3 HCO mg/L 422 SO mg/L 101 CI mg/L 32 co,2mg/L 1.2 Temperature 25 C a. Calculate pH of that water b. Calculate the alkalinity (exactly, including effects of protons and hydroxyl ions); express alkalinity as mg/L CaCO e. Draw a bar chart for the water, Express all concentrations as mg/L CaCO, (The easiest way to do...
To pH of 8.3 To pH of 4.5 0 320 Alkalinity. Wastewater Problem. Determine the alkalinity in mg/L CaCOs for DI water and tap water based on the number of digits (digits= mg/L CaCO3 in 100 ml) Assuming that 25mg/L of filter alum [Al2(SO4)3-14.3 H2O] with MW-600 was used for coagulation, determine the total amount of alkalinity consumed in mg/L CaCOs from coagulation and flocculation. Is the amount of alkalinity consumed from coagulation less than, equal to, or greater than...
A sample of water at pH 10.5 has 39.0 mg/L of CO32 and 24 mg/L of HCO3 a) Ignoring the contribution of [H] and [OH] to alkalinity, what is the alkalinity as CaCO3? b) Include the contribution of [H] and [OH], find the alkalinity as CaCO3
1a.) From water sample, 10 mg/L HCO3- as CaCO3, 10 mg/L CO3- as CaCO3 and 50 mg/L Ca+ as CaCO3 were measured. pH was near neutral. What is alkalinity? _____ mg/L as CaCO3 1b.) From water sample, 10 mg/L HCO3- as CaCO3, 10 mg/L CO3- as CaCO3 and 50 mg/L Ca+ as CaCO3 were measured. pH was near neutral. What is alkalinity? _____ mg/L as CaCO3 1c.) Calculate Ksp = _____ A2BO3 ->2A++ BO32- Molar concentration of A+ = Molar...
Question 2 A clarified wastewater containing 5 mg/L NH3-N is to be breakpoint chlorinated. The water has an alkalinity of 100 mg/L as CaCOs. Determine i. The stoichiometric requirement for Cl2. ii. If the water is sufficiently buffered. The increase in dissolved solids to be expect. [15 marks) Question3 The pH of a 0.1 Msolution of sodium bicarbonate is adjusted to 7.0 with a strong acid. A 100 mL portion of this solution is obtained, and to this volume 100...