thumbs up thank you!!!
2. (a) A 12-tooth pinion has AGMA standard full-depth involute teeth with diametral pitch of 4...
A gear train of a 28 tooth pinion and a 60 tooth spur gear is designed to operate with the following: a 25 degree pressure angle, full-depth involute teeth, and a diametral pitch of 16 teeth/in. The standard center distance is increased by 0.125 inches. At what pressure angle do the gears operate now?
4. A spur gear has 22 teeth of the 20° full depth involute form and a diametral pitch of 1.75. Compute the circular pitch, the addendum, the dedendum, the pitch circle diameter, the whole depth of a tooth, the clearance, outside diameter, and the base circle diameter.
For a pair of spur gears with a diametral pitch of 12, and a 20° degree pressure angle and with the number of teeth on the pinion 11 and the number of teeth on the gear 18, compute all the features of the gear teeth described below: (a) Pitch diameter for the gear, (b) Pitch diameter for the pinion (c) The circular pitch, (d) Addendum, (e) Dedendum, (f) Clearance, (g) Whole depth, (h) The tooth thickness (hint: based on circular...
A gear-set consists of a 16-tooth pinion driving a 40-tooth gear. The diametral pitch (P) is 2, and the addendum and dedendum are 1/P and 1.25/P respectively. The gears are cut using a pressure angle of 20°. Compute the circular pitch, the center distance and the radii of the base circles. In mounting the gears, the center distance was incorrectly made ¼ in longer. Compute the new values of pressure angle and the pitch circle diameters. (Ans. 1.57 in, 14...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive 0 See Figure P12-1. The shaft rotating...
27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is 2 in. The pinion rotates at 1000 rev/min and transmits 50 hp. The shafts are at 90. Determine the components of the gear tooth force and show these on a sketch of the ge 27 Two 20° straight bevel gears have a diametral pitch of 4, and 24 and 48 teeth, respectively The tooth face width is...
See Figure P12-1. The shaft rotating at 550 rpm carries a spur gear B having 96 teeth with a diametral pitch of 6. The teeth are of the 20%, full-depth, involute form. The gear receives 30 hp from a pinion directly above it. Compute the torque delivered to the shaft and the tangential and radial forces exerted on the shaft by the gear. Figure P12-1 Shaft carrying a gear and a V-belt drive C D 10.004-10.00 6.00 V-belt sheave Gear...
3. A commercial enclosed gear drive consists of a 20 spur pinion having 16 teeth driving a 48-tooth gear. The pinion speed is 300 rev/min, the gear face width 2 in., and the diametral pitch 6 teeth/in. The gears are grade t steel, through-hardened at 200 Brinell, made to No. 6 quality standards, uncrowned, and are to be accurately and ngid mounted Assume a lion life ofi will transmitareliability of90%(KR 0.85), and use YN 1.355N 01:8 and Z 1. used...
In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is 2. The pressure angle is 25° calculate the following A. The tooth thickness for the gear and for the pinion. B. If the pinion is rotating with an angular velocity of 700 rpm and a torque of 800 lbf.in. is being applied on the shaft of the pinion then calculate the following The power generated by the output shaft of the driven gear (Efficiency-100%)....
Number of teeth on pinion N1=23 pitch diamater d2=154mm center dis a=100mm rotataional speed of pinion n1=1000rpm tangenel force Ft=2500n pressure angle alpa=20 degrees a) calculate the pitch diameter and base diamater of pinion b)calculate the gear ratio from pinion to gear c)module of this gear train d)torque transmissted thru pinion and gear power coming from motor e)calcuate force tramsitted between teeth of pinion and gear? sketch.