Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with...
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in the figure. * Gear E is the driver running at +100 rpm. The Arm (link A) is the output driven link. The ring gear B is fixed. The number of teeth given as: are NE 34 ND 17 Nc 26 a) Determine the number of teeth for the ring gear B. All gears use the same pitch b) Determine the rpm and the direction...
estion- a) Find the speed ratio of the gear train shown in figure. What will be the direction of gear 7 b) Determine pitch line velocity (v r.w) of gear &, provided for gear 6 Imodule (D/T) 5mm e) If double the speed ratio (as calculated in a) is required with a simple gear train (having only two gears) number of teeth on driven gear, provided input gear has 20 teeth. IST IST 25T 33T I8T An epicyclic gear train...
A gear train of a 28 tooth pinion and a 60 tooth spur gear is designed to operate with the following: a 25 degree pressure angle, full-depth involute teeth, and a diametral pitch of 16 teeth/in. The standard center distance is increased by 0.125 inches. At what pressure angle do the gears operate now?
2. (20 points) Design a compound, reverted, 20 standard spur gear train for a gear ratio of 70:1. (a) Specify the teeth numbers (2 18 for the pinions); (b) With the diametral pitch of 10 for all gears, calculate their outside diameters and the contact ratio for the pair with the larger gear ratio. 2. (20 points) Design a compound, reverted, 20 standard spur gear train for a gear ratio of 70:1. (a) Specify the teeth numbers (2 18 for...
kinematics please answer ASAP 2 (20 points) Design a compound, reverted, 20° standard spur gear train for a gear ratio of 70:1 . (a) Specify the teeth numbers (2 18 for the pinions); (b) With the diametral pitch of 10 for all gears, calculate their outside diameters and the contact ratio for the pair with the larger gear ratio. 2 (20 points) Design a compound, reverted, 20° standard spur gear train for a gear ratio of 70:1 . (a) Specify...
4. (12 points) A compound reverted spur gear train is to be designed to reduce the speed of a 180HP engine's rotating shaft from 3500rpm to 100rpm exactly. (a) (5 points) Specify appropriate numbers of teeth (N2, N3, N4 and N5) to minimize the gearbox size. A pressure angle of 20° is used for all the gears. Interference of gears is not acceptable. (b) (5 points) If all the gears are cut with 20° full-depth system. Assume a diametral pitch...
4. (12 points) A compound reverted spur gear train is to be designed to reduce the speed of a 180HP engine's rotating shaft from 3500rpm to 100rpm exactly. (a) (5 points) Specify appropriate numbers of teeth (N2, N3, N4 and N5) to minimize the gearbox size. A pressure angle of 20° is used for all the gears. Interference of gears is not acceptable. (b) (5 points) If all the gears are cut with 20° full-depth system. Assume a diametral pitch...
4.(12 points) A compound reverted spur gear train is to be designed to reduce the speed of a 180HP engine's rotating shaft from 3500rpm to 100rpm exactly. (a) (5 points) Specify appropriate numbers of teeth (N2, N3, N4 and N5) to minimize the gearbox size. A pressure angle of 20° is used for all the gears. Interference of gears is not acceptable. (b) (5 points) If all the gears are cut with 20° full-depth system. Assume a diametral pitch of...
c-100 FIXED PROBLEM 1 In the planetary gear train shown above, the arm is driven at 10 RPM clockwise. Number of teeth is indicated for each gear. What is the speed of gear D and in which direction? (sun gear A is fixed to ground and does not rotate).
A compound reverted spur gear train is to be designed to reduce the speed of a 180HP engine's rotating shaft from 3500rpm to 100rpm exactly. (a) (5 points) Specify appropriate numbers of teeth (N2, N3, N4 and N5) to minimize the gearbox size. A pressure angle of 20° is used for all the gears. Interference of gears is not acceptable. (b) (5 points) If all the gears are cut with 20° full-depth system. Assume a diametral pitch of 6 teeth/in,...