c-100 FIXED PROBLEM 1 In the planetary gear train shown above, the arm is driven at...

Question

Question

Answer 1

Answer #1

Answer 2

Similar Homework Help Questions

Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with...

Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with standard, involute teeth cut with a 20° pressure angle and a diametral pitch of 10 teeth/inch. Note that the contact between the gears is indicated by the pitch circles in the figure. a) Gear #2 has 18 teeth and gear #5 has 42 teeth. How many teeth must be on gear #4? b) If the arm (#3) is driven at 600 revolutions per minute...
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in...

** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in the figure. * Gear E is the driver running at +100 rpm. The Arm (link A) is the output driven link. The ring gear B is fixed. The number of teeth given as: are NE 34 ND 17 Nc 26 a) Determine the number of teeth for the ring gear B. All gears use the same pitch b) Determine the rpm and the direction...
16 The planetary gearset shown has a sun gear with 40 teeth, and idler planet gear...

16 The planetary gearset shown has a sun gear with 40 teeth, and idler planet gear with 20 teeth, and the follower gear with 30 teeth. The arm rotates at a constant speed of 100 rpm clockwise. Determine the rotation speed and direction of the follower. M-40

estion- a) Find the speed ratio of the gear train shown in figure. What will be...

estion- a) Find the speed ratio of the gear train shown in figure. What will be the direction of gear 7 b) Determine pitch line velocity (v r.w) of gear &, provided for gear 6 Imodule (D/T) 5mm e) If double the speed ratio (as calculated in a) is required with a simple gear train (having only two gears) number of teeth on driven gear, provided input gear has 20 teeth. IST IST 25T 33T I8T An epicyclic gear train...
In the planetary gear train shown in the figure, gear 2 turns at 500 rpm in...

In the planetary gear train shown in the figure, gear 2 turns at 500 rpm in the direction indicated. Determine the speed and direction of rotation of arm 6 if gears 5 rotates at 300 rpm in the same direction as gear 2. STEP NI 3 5 !! 11 21125) Arm 4 (30) (45) 5050)
A compound epicyclic gear train is shown in the Figure. The shaft P is driven at...

A compound epicyclic gear train is shown in the Figure. The shaft P is driven at 2500 rpm in the clockwise direction by a motor of power rating 8 kW. The sun S2 is fixed. The number of teeth in the gears are S1, 34; S2, 21; A1, 86 and A2, 73. Determine The magnitude and direction of the angular velocity of the shaft Q and The torque required to fix the sun, S2 A, Q P S, 5,

Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as...

Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as shown below. All years have 20 teeth except for the fixed ring gear which has 60 teeth. If the road speed of the grader is to be 20 mph calculate the required rotational speeds of the output shaft and input shaft. Determine the overall input to output ratio. Input 20 mph Output Note, choose one or more than one of the following MC answers...
1. In an epicyclic gear train, as shown in Figure, the wheel C is keyed to...

1. In an epicyclic gear train, as shown in Figure, the wheel C is keyed to the shaft B and wheel F is keyed to shaft A. The wheels D and E rotate together on a pin fixed to the arm G. The number of teeth on wheels C, D, E and F are 35, 65, 32 and 68 respectively. If the shaft A rotates at 60 rpm and the shaft B rotates at 28 rpm in the opposite direction,...
UU 7. A planetary gear train is shown in Figure P7. The carrier (link 2) serves...

UU 7. A planetary gear train is shown in Figure P7. The carrier (link 2) serves as the input to the train. The sun (gear 1) serves as the output from the train and has a 1.0-in. pitch diameter with a diametric pitch of 20. Gear 3 has 45 teeth and gear 4 has 20 teeth Gear 5 has 30 teeth and is keyed to the same shaft as gear 4. Gear 5 mates with the ring gear (gear 6),...

Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as...

Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as shown below. All gears have 20 teeth except for the fixed ring gear which has 60 teeth. If the road speed of the grader is to be 20 mph, calculate the required rotational speeds of the output shaft and input shaft. Determine the overall input to output ratio. Input 20 mph Output Note, choose one or more than one of the following MC answers...