Homework Answers
Add Answer to:
UU 7. A planetary gear train is shown in Figure P7. The carrier (link 2) serves...
Kinematics class 3. (25 POINTS) Planetary gear train analysis: The figure below representsa planetary gear train...
Kinematics class
3. (25 POINTS) Planetary gear train analysis: The figure below representsa planetary gear train used in a drill head. Gear 1 rotates with the input shaft. The ring gear 3 meshes both with gear 5 and gear 6, which are the planets. Gear 2 acts as the carrier for gear 5, the output is the carrier 4 Consider the number of teeth Ni-6, N2 36, N-54, N-24 and No-9 a) Identify how many stages are needed to fully...
Consider a planetary gear train consisting of a sunar, a ring seara carrier and the planet...
Consider a planetary gear train consisting of a sunar, a ring seara carrier and the planet ears. In this planetary gear train, the sun gear is fixed and the input motion comes from the carrier Calculate the rotations of the plant and carriers given ce full rotation of the ring N_-30. -15, N 20, and N -100 (Note: N/N) Also, if the ring transmits a power of 100kw, what is the power transmitted each planetgear and the carrier!
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. a) What are the diameters of Gears 1, 2, 3, and 4? b) What is the pitch-line velocity of Gear 1, in ft/min? c) Is the pitch-line velocity of Gear 2 the same as Gear 1? d) What is the pitch-line velocity of Gear 3 (and, therefore, Gear...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. i) What is the ratio of output torque (Gear 4) to input torque (Gear 1)? j) Is it a coincidence that it is the same as the answer in 1 An input shaft drives Gear 1 with 20 teeth at 1800 rpm which mates with the 80-tooth Gear...
estion- a) Find the speed ratio of the gear train shown in figure. What will be...
estion- a) Find the speed ratio of the gear train shown in figure. What will be the direction of gear 7 b) Determine pitch line velocity (v r.w) of gear &, provided for gear 6 Imodule (D/T) 5mm e) If double the speed ratio (as calculated in a) is required with a simple gear train (having only two gears) number of teeth on driven gear, provided input gear has 20 teeth. IST IST 25T 33T I8T An epicyclic gear train...
Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with...
Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with standard, involute teeth cut with a 20° pressure angle and a diametral pitch of 10 teeth/inch. Note that the contact between the gears is indicated by the pitch circles in the figure. a) Gear #2 has 18 teeth and gear #5 has 42 teeth. How many teeth must be on gear #4? b) If the arm (#3) is driven at 600 revolutions per minute...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. e) What is the transmitted force between Gears 1 and 2, in lbf? f) What is the torque of Gear 1, in in-lbf? g) What is the torque of Gear 2? h) The torque of Gear 2 and 3 are the same. What is the torque of Gear...
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in...
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in the figure. * Gear E is the driver running at +100 rpm. The Arm (link A) is the output driven link. The ring gear B is fixed. The number of teeth given as: are NE 34 ND 17 Nc 26 a) Determine the number of teeth for the ring gear B. All gears use the same pitch b) Determine the rpm and the direction...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral p...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral pitch. Gear A has 88 teeth and gear B has 100 teeth both internally and externally. The sun-wheel C which is keyed to shaft P has 44 teeth and the pinion E keyed to shaft R has 25. There are floating compound planet wheels F, G. The power input to shaft R is 8 kW at 1440 rev/min....
Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as...
Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as shown below. All years have 20 teeth except for the fixed ring gear which has 60 teeth. If the road speed of the grader is to be 20 mph calculate the required rotational speeds of the output shaft and input shaft. Determine the overall input to output ratio. Input 20 mph Output Note, choose one or more than one of the following MC answers...
Kinematics class
3. (25 POINTS) Planetary gear train analysis: The figure below representsa planetary gear train used in a drill head. Gear 1 rotates with the input shaft. The ring gear 3 meshes both with gear 5 and gear 6, which are the planets. Gear 2 acts as the carrier for gear 5, the output is the carrier 4 Consider the number of teeth Ni-6, N2 36, N-54, N-24 and No-9 a) Identify how many stages are needed to fully...
Consider a planetary gear train consisting of a sunar, a ring seara carrier and the planet ears. In this planetary gear train, the sun gear is fixed and the input motion comes from the carrier Calculate the rotations of the plant and carriers given ce full rotation of the ring N_-30. -15, N 20, and N -100 (Note: N/N) Also, if the ring transmits a power of 100kw, what is the power transmitted each planetgear and the carrier!
estion- a) Find the speed ratio of the gear train shown in figure. What will be the direction of gear 7 b) Determine pitch line velocity (v r.w) of gear &, provided for gear 6 Imodule (D/T) 5mm e) If double the speed ratio (as calculated in a) is required with a simple gear train (having only two gears) number of teeth on driven gear, provided input gear has 20 teeth. IST IST 25T 33T I8T An epicyclic gear train...
Problem 1 (50 points The planetary gear train shown in the figure uses spur gears with standard, involute teeth cut with a 20° pressure angle and a diametral pitch of 10 teeth/inch. Note that the contact between the gears is indicated by the pitch circles in the figure. a) Gear #2 has 18 teeth and gear #5 has 42 teeth. How many teeth must be on gear #4? b) If the arm (#3) is driven at 600 revolutions per minute...
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in the figure. * Gear E is the driver running at +100 rpm. The Arm (link A) is the output driven link. The ring gear B is fixed. The number of teeth given as: are NE 34 ND 17 Nc 26 a) Determine the number of teeth for the ring gear B. All gears use the same pitch b) Determine the rpm and the direction...
2. Fig.2 shows an epicyclic gear train in which the internal teeth on the gears A and B have the same diametral pitch. Gear A has 88 teeth and gear B has 100 teeth both internally and externally. The sun-wheel C which is keyed to shaft P has 44 teeth and the pinion E keyed to shaft R has 25. There are floating compound planet wheels F, G. The power input to shaft R is 8 kW at 1440 rev/min....
Aroad grader has 36" diameter wheels which are driven by a two-stage planetary gear train as shown below. All years have 20 teeth except for the fixed ring gear which has 60 teeth. If the road speed of the grader is to be 20 mph calculate the required rotational speeds of the output shaft and input shaft. Determine the overall input to output ratio. Input 20 mph Output Note, choose one or more than one of the following MC answers...
Most questions answered within 3 hours.
-
In one statistics class, students were given one homework
assignment. The professor asked students to find...
asked 6 minutes ago -
(a) Calculate the force needed to bring a 1050 kg car to rest
from a speed...
asked 5 minutes ago -
A box contains 14 large marbles and 19 small marbles. Each
marble is either green or...
asked 22 minutes ago -
The results of a one-sample t test were t (18) = 2.11,
p < 0.05. In...
asked 32 minutes ago -
What kind of share-based compensation does the company have for
Verizon? What was compensation expense for...
asked 40 minutes ago -
Place each of the following transactions in one of the four
components of expenditure: (remember it...
asked 48 minutes ago -
Find the optimal binary symbol code using the Huffman coding
algorithm. Draw the Huffman tree (show...
asked 50 minutes ago -
Using Rhodes Corporation’s financial statements (shown after
part f), answer the following questions.
a. What is...
asked 50 minutes ago -
Viewers of the ABC news segment may use ___________ to make
generalization about what the individual...
asked 1 hour ago -
Which of the following captures Locke’s response to Hobbes on
the issue of the enforcement of...
asked 1 hour ago -
another 515 students are selected at random from florida. they are
given a 3-hour preparation course...
asked 1 hour ago -
A regional distributor deals with a product ABC that has an
annual demand of 3000 unit....
asked 2 hours ago