Fluids Problem. Please provide all steps and explaination thanks!
Homework Answers
Add Answer to:
Fluids Problem. Please provide all steps and
explaination thanks!
(5) Oil with a density of 850...
Oil with a density of 850 kg/m and kinematic viscosity of 0.00062 m2/s is being discharged...
Oil with a density of 850 kg/m and kinematic viscosity of 0.00062 m2/s is being discharged from a 5-mm-diameter, 40-m-longhorizontal pipe from a storage tank open to the atmosphere. The height of the liquid level above the center of the pipe is 3-m. If the friction factor (f) of the pipe is 0.006. Disregarding the minor losses, determine the flow rate of oil through the pipe. 11. 3 m Oil tank 5 mm
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s...
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s is pumped from an open tank to a pressurized tank held at 345 k Pa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe having an inside diameter of 0.07792 m at the rate of 3.494 x 103 m'/s. The length of the straight pipe is 122 m and the pipe...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to...
Oil (density = 910Kg/m3 and viscosity 3.1 x10-3 Pa-s) is pumped from an open tank to a pressurized tank held at 400KPa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe (inside diameter 0.8m) at a rate of 5x10-3 m3/s. The length of the straight pipe is 150 m, and the pipe contains 4 (90-degree) elbows and two globe valve half open. The level of the liquid...
Solve number 5 a and b showing all steps and units please b. Repeat computation of...
Solve number 5 a and b showing all steps and units
please
b. Repeat computation of AP/L in psi/ft when flow rate is reduced to 20000 gal/day 5. An elevated storage tank drains by gravity to a vessel a fluid with density 0.72 gr/cm3 and viscosity 0.6 cp through a pipe 200 m length by 0.12 m diameter. Surface roughness of 0.00015ft The vessel is located 15 m below the storage tank, and both are open to the atmosphere a....
Q4: The pump is used to deliver of water from a river to a storage reservoir....
Q4: The pump is used to deliver of water from a river to a storage reservoir. The four pipes are connected in series of Inverse L shape which means the first pipe in vertical direction and others in horizontal direction. The first pipe in vertical position of 500m length of 150 mm diameter cast iron pipe, the second pipe is bend at 90' with a radius of 0.75m, the third pipe in horizontal direction of 100m length of 160mm diameter...
Please solve and show all the steps and answer (in a neat handwriting or typed !)...
Please solve and show all the steps and answer (in a
neat handwriting or typed !)
Page 5 4. A tank is filled with incompressible oil to a depth of (h,) 6.43 m open tank The tank is being drained via a horizontal pipe (radius 1.92 cm), attached at a height of (h,) 0.789 m above the tank bottom Oil is flowing out through the pipe at a rate of 2.34 x 10" m%, but the tank is so large...
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth...
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth circular pipe of inner diameter 2 cm. It then flows through a filtering section made up of the same pipe packed at void fraction ε-0.4 with solid spherical particles of diameter 0.5 mm to filter out any fine material. All pipe sections are straight as shown. Design constraint: the pressure drop in the packed bed section (call this AP2)...
A U-tube contains liquid of unknown density. An oil of density 770 kg/m³ is poured into...
A U-tube contains liquid of unknown density. An oil of density
770 kg/m³ is poured into one arm of the tube until the oil column
is 13.5 cm high. The oil-air interface is then 4.5 cm above the
liquid level in the other arm of the U-tube. Find the density of
the liquid.
A raft is made of 11 logs lashed together. Each is 38.0 cm in
diameter and has a length of 7.00 m. How many people (whole number)...
this is all of the information given Problem 3. A piping system consists of 1200 m...
this is all of the information given
Problem 3. A piping system consists of 1200 m of 5 cm diameter cast-iron pipe, two 45° and four 90° flanged long-radius elbows, a fully open flanged globe valve, and a sharp submerged exit into a reservoir. The elevation of the outlet relative to the inlet is 100 m. What gage pressure is required at the inlet to deliver 0.005 m2/s of water at 20°C into the reservoir? Assume that the density and...
(c) Fuel oil, with a density of 870 kg m-, is pumped through a horizontal pipe,...
(c) Fuel oil, with a density of 870 kg m-, is pumped through a horizontal pipe, as shown in Figure Q2.2. The pipe is 100 mm in diameter and contains an orifice plate with a throat diameter of 40 mm. The pressure drop across the orifice is measured on a U-tube manometer, containing mercury with a specific gravity 13.6. The difference in levels of the columns is measured as 45 mm. The coefficient of discharge for the orifice plate Ca...
Oil with a density of 850 kg/m and kinematic viscosity of 0.00062 m2/s is being discharged from a 5-mm-diameter, 40-m-longhorizontal pipe from a storage tank open to the atmosphere. The height of the liquid level above the center of the pipe is 3-m. If the friction factor (f) of the pipe is 0.006. Disregarding the minor losses, determine the flow rate of oil through the pipe. 11. 3 m Oil tank 5 mm
2. An oil having density of 833 kg/m3 and a viscosity of 3.3 x 103 Pa.s is pumped from an open tank to a pressurized tank held at 345 k Pa gauge. The oil is pumped from an inlet at the side of the open tank through a line of commercial steel pipe having an inside diameter of 0.07792 m at the rate of 3.494 x 103 m'/s. The length of the straight pipe is 122 m and the pipe...
Solve number 5 a and b showing all steps and units
please
b. Repeat computation of AP/L in psi/ft when flow rate is reduced to 20000 gal/day 5. An elevated storage tank drains by gravity to a vessel a fluid with density 0.72 gr/cm3 and viscosity 0.6 cp through a pipe 200 m length by 0.12 m diameter. Surface roughness of 0.00015ft The vessel is located 15 m below the storage tank, and both are open to the atmosphere a....
Q4: The pump is used to deliver of water from a river to a storage reservoir. The four pipes are connected in series of Inverse L shape which means the first pipe in vertical direction and others in horizontal direction. The first pipe in vertical position of 500m length of 150 mm diameter cast iron pipe, the second pipe is bend at 90' with a radius of 0.75m, the third pipe in horizontal direction of 100m length of 160mm diameter...
Please solve and show all the steps and answer (in a
neat handwriting or typed !)
Page 5 4. A tank is filled with incompressible oil to a depth of (h,) 6.43 m open tank The tank is being drained via a horizontal pipe (radius 1.92 cm), attached at a height of (h,) 0.789 m above the tank bottom Oil is flowing out through the pipe at a rate of 2.34 x 10" m%, but the tank is so large...
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth circular pipe of inner diameter 2 cm. It then flows through a filtering section made up of the same pipe packed at void fraction ε-0.4 with solid spherical particles of diameter 0.5 mm to filter out any fine material. All pipe sections are straight as shown. Design constraint: the pressure drop in the packed bed section (call this AP2)...
A U-tube contains liquid of unknown density. An oil of density
770 kg/m³ is poured into one arm of the tube until the oil column
is 13.5 cm high. The oil-air interface is then 4.5 cm above the
liquid level in the other arm of the U-tube. Find the density of
the liquid.
A raft is made of 11 logs lashed together. Each is 38.0 cm in
diameter and has a length of 7.00 m. How many people (whole number)...
this is all of the information given
Problem 3. A piping system consists of 1200 m of 5 cm diameter cast-iron pipe, two 45° and four 90° flanged long-radius elbows, a fully open flanged globe valve, and a sharp submerged exit into a reservoir. The elevation of the outlet relative to the inlet is 100 m. What gage pressure is required at the inlet to deliver 0.005 m2/s of water at 20°C into the reservoir? Assume that the density and...
(c) Fuel oil, with a density of 870 kg m-, is pumped through a horizontal pipe, as shown in Figure Q2.2. The pipe is 100 mm in diameter and contains an orifice plate with a throat diameter of 40 mm. The pressure drop across the orifice is measured on a U-tube manometer, containing mercury with a specific gravity 13.6. The difference in levels of the columns is measured as 45 mm. The coefficient of discharge for the orifice plate Ca...
Most questions answered within 3 hours.
-
Vulcan Flyovers offers scenic overflights of Mount St. Helens,
the volcano in Washington State that explosively...
asked 57 seconds from now -
If organizations do not adapt fast enough and move incrementally
from the twentieth-century model to the...
asked 7 seconds from now -
A helium balloon with 2.5L of gas has a gauge pressure of 10,000
Pa. The balloon...
asked 4 minutes ago -
What is responsible for Jupiter's enormous magnetic field?
asked 19 minutes ago -
At the end of the year, a company offered to buy 5,000 units of
a product...
asked 20 minutes ago -
Implement C++ program for each of the following.
Let D = [-48, -14, -8, 0, 1,...
asked 40 minutes ago -
Consider a labor market in which LD = 400 – 4W and LS = 250 +...
asked 54 minutes ago -
Let’s say you are teaching a typically-developing young child
how to eat with a spoon. Describe...
asked 38 minutes ago -
Ask Your Teacher A toy gun uses a spring to project a 5.6-g soft
rubber sphere...
asked 50 minutes ago -
*****DO NOT ANSWER THIS QUESTION IF YOU DON'T
KNOW*******
Question - PERSONAL DEVELOPMENT ESSAY and Detailed...
asked 57 minutes ago -
A certain rifle bullet has a mass of 5.25 g. Calculate the de
Broglie wavelength of...
asked 1 hour ago -
Research new software products that assist in project
communication management. Write a paper summarizing your findings,...
asked 1 hour ago