[2000] Question 3: A 500-km, 500-kV, 60-Hz, uncompensated three-phase line has a positive sequence series j4.4...
A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence series impedance ?=0.08+?0.48 Ω/km and a positive-sequence shunt admittance ?=?3.33×10−6 S/km. At full load, the line delivers 250 MW at 0.99 pf lagging and at 220 kV. Using the nominal ? circuit, calculate: a. The ABCD parameters, b. The sending-end voltage and current, c. The percent voltage regulation.
4. A 500 km, 500kV,60 Hz three-phase transmission line has a positive sequence series impedance z =j 0.38.2/km and a shunt admittance y =j 4.0 x 10-6S/km. Line losses are neglected. a. Calculate the line's characteristic impedance Zc, the propagation constant y and the exact ABCD parameters of the line... b. Calculate the surge impedance loading (SIL) in MW and the maximum power that the line can deliver at rated voltage C. At full load the line delivers 1000 M...
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05j0.45 2 per km and a per phase shunt admittance ofy = j3.4 x 10-6 siemens per km. The line is 80 km long. Using the nominal r model, determine (a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers (b) 200 MVA, 0.8 lagging power factor at 220...
PROBLEM: A 230-kV, 50 Hz, three-phase transmission line is 120 km long. The line has a per phase series impedance of z-0.05 +j0.45 Ω per km, and a per phase shunt admittance of y 3.4x10-6 Siemens per km. The line delivers (at the receiving end) 200 MVA, 0.8 lagging power factor at 220 kV. Now consider two cases: A- Assume that shunt parameters of the transmission line are ignored (i.e. even if this is a medium length transmission line, under...
Please help me with question 2 ASAP Question 1 [15 Marks A 500-kV, 60-Hz, 3-phase completely transposed overhead line has the resistance R=0.0201/km, Ds = 0.149m and r=0.16m. The horizontal phase spacings between the conductors are 10, 10, and 20 m. Calculate a) the line inductive reactance in /km, b) the line impedance in /km, c) the line capacitance-to-neutral Can in F/m, d) the admittance-to-neutral in S/km, neglecting the effect of the earth plane, and e) the exact ABCD parameters...
Q2. Draw the nominal π circuit that is used to represent the medium-length transmission line model with total series impedance Z and total shunt admittance Y. Then derive the equations to express the ABCD parameters (a) 20% (b)A 200 km, 230 kV, 50 Hz three-phase overhead transmission line has a positive-sequence series impedance z (0.08 + j0.48) Ω/km, and a positive-sequence shunt admittance y-j3.33 x 10T° S/km. At full load, the line delivers 250 MW at 0.99 power factor lagging...
power system A single-circuit 60-Hz high voltage power transmission line is 370 km (230 mi) long. The conductors are Rook with flat horizontal configuration and 7.25 ms=(23.8 ft.) conductor spacing. The load on the line is 125 MW at 100% power factor. Use attached Tables A3 to A3to determine; The sending end voltage Vs The sending end current Is The sending end power Ps The percentage voltage regulation The transmission efficiency Given that Ds for the Rook conductor is 0.0327...
A long, lossless, three-phase transmission line is operating with 60 Hz with a nominal voltage of 400 kV. The distance between sending and receiving sides of the line is 350 km and the line’s series inductance and shunt capacitance per length per phase are 0.92 mH/km and 0.016µF/km, respectively. If the line delivers 667.2461 MW at 400 kV with unity power factor at its receiving side, what would be the line-line voltage magnitude in the middle of the line?
A 50-Hz, three-phase transmission line is 300 km long. It has a total series impedance of 23 + j75 Ohms and a shunt admittance of j500 µS. It delivers 50 MW at 220 kV, with a power factor of 0.88 lagging. Find the voltage at the sending end using: 1) the short line approximation. 2) the medium-length approximation. 3) the long line equation. How accurate are the short- and medium-length approximations for this case?
QUESTIONS 1- A 69-kV, three-phase transmission line is 20 km long. The line has a per phase series impedance of 0,120 + 10,4325 per km. Detemine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 60 MVA, 0.8 lagging power factor at 60 kV. (b) 110 MW, unity power factor at 60 kV