A person holds a ladder horizontally at its center. Part A Treating the ladder as a...
Consider a wind turbine having moment of inertia 240,000 kg m2. If a 120 kg person were holding on to the edge of the turbine 10 m from its center the torque due to the person is ________ and the angular acceleration of the turbine is ________. 120,000 Nm; 0.05 rad/s2 12,000 Nm; 0.005 rad/s2 240,000 Nm; 0.05 rad/s2 12,000 Nm; 20 rad/s2
The uniform slender rod contains a 4-kg uniform rod with the center of mass at point G is suspended from a hinge at C. The rod is at rest in a vertical position when point B is subjected to a force of P = 75 N, and a moment M = 50 Nm, the length of the rod is 1 m and r = 0.225m. Determine the reactions at the pin C and the initial angular acceleration of the rod....
The uniform thin rod in the figure below has mass M =
4.00 kg and length L = 2.21 m and is free to rotate on a
frictionless pin. At the instant the rod is released from rest in
the horizontal position, find the magnitude of the rod's angular
acceleration, the tangential acceleration of the rod's center of
mass, and the tangential acceleration of the rod's free end.
(a)
the rod's angular acceleration (in rad/s2)
rad/s2
(b)
the tangential acceleration...
A 8.62 -m ladder with a mass of 21.1 kg lies flat on the ground. A painter grabs the top end of the ladder and pulls straight upward with a force of 234 N. At the instant the top of the ladder leaves the ground, the ladder experiences an angular acceleration of 1.87 rad/s2 about an axis passing through the bottom end of the ladder. The ladder's center of gravity lies halfway between the top and bottom ends. (a) What...
A 8.47 -m ladder with a mass of 24.0 kg lies flat on the ground. A painter grabs the top end of the ladder and pulls straight upward with a force of 231 N. At the instant the top of the ladder leaves the ground, the ladder experiences an angular acceleration of 1.68 rad/s2 about an axis passing through the bottom end of the ladder. The ladder's center of gravity lies halfway between the top and bottom ends. (a) What...
A 8.62 -m ladder with a mass of 21.1 kg lies flat on the ground. A painter grabs the top end of the ladder and pulls straight upward with a force of 234 N. At the instant the top of the ladder leaves the ground, the ladder experiences an angular acceleration of 1.87 rad/s2 about an axis passing through the bottom end of the ladder. The ladder's center of gravity lies halfway between the top and bottom ends. (a) What...
Problem 1 A mass-less ladder stands against a vertical frictionless wall as shown in Fig. 5. The static coefficient of friction between the ladder and the horizontal plane is Mu =0.55. Denote the angle between the horizontal plane and the ladder by fi. a) Calculate the smallest value of Beta that allows a person to climb to the top of the ladder without it beginning to slip. Problem 2 A thin uniform rod of length L= 0.7 m and mass...
A massless seesaw of length 2.9 m is horizontally at rest. Two person of mass 49 kg and 74 kg sit simultaneously, and begin to move with negligible initial speed. Calculate the initial angular acceleration. Use g = 10 m/s2.
wall length of Ladder=7.om man on middle of ladder mass of man man Ladder's center of ma 2.5mm floor 3. 2 m Static Equilibrium - Ladder Comprehensive As shown in the figure, the top of a 7.0-m long ladder (mass 2 = 20 kg) leans against a frictionless wall. The bottom of the ladder rests on a rough floor, with 3.2 m from the wall. The distance from the ladder's center of mass to its bottom end is 2.5 m...
A uniform 7 kg rod with length 10 m has a frictionless pivot at one end. The rod is released from rest at an angle of 23 degrees beneath the horizontal.What is the angular acceleration of the rod immediately after it is released?The moment of inertia of a rod about the center of mass is 1/12 mL2 , where m is the mass of the rod and L is the length of the rod. The moment of inertia of a...