show how to calculate the stator curren the output torque when the motor is operating over...
Problem 2. (25 points) For a 120-V, 1/3 hp, four pole, 1-phase induction motor, the parameters of the equivalent circuit, are R,-1.8(2, R,-2.5Ω, X,-X,-2.462, and Xm-60 Ω. At a slip of 500, the motor's rotational losses are 51W. The rotational losses maybe assumed constant over the normal operating range of the motor. If the slip is 0.05, calculate a. Input Power b. Air Gap Power, c. Induced Torque Tin d. Output power e. Load torque. f. Overall Motor efficiency g....
3. (25 points) Induction Motor Torque Production. An induction motor has the torque vs. speed curve shown below. By changing the machine's inputs or its parameters, we can influence its behavior. For example, cutting its terminal voltage by half yields the changes illustrated below Peak Torque at same speed t(slip) % of the Peak Torque Floalslip) Slightly reduced operating speed, but double the operating slip 2001000 100 200 slip) % of the Starting Torque We can influence its torque production...
I want to solve this problem step by step. Thanks 3. (25 points) Induction Motor Torque Production. An induction motor has the torque vs. speed curve shown below. By changing the machine's inputs or its parameters, we can influence its behavior. For example, cutting its terminal voltage by half yields the changes illustrated below Peak Torque at same speed t (slip) fslip) load slip) of the Peak Torque Slightly reduced operating speed, but double the operating slip 200 -200 100...
The starting torque of a three-phase synchronous motor is increased when SE O ou h atic tio co e rotor electromagnet is turned on. a. b. the rotor electromagnet is turned off. c, the power factor of the ac power network is unity. d. dc power is applied to one of the stator windings. 2. When a synchronous motor without load is connected to a three-phase ac power network, the resulting power factor depends on a. the speed of the...
4. A three-phase induction motor has the following data: Nominal power, P 7.5 kW Nominal voltage, = 400 V Connection: Y Nominal frequency, f-50 Hz Nominal speed, nn 960 rpm Stator resistance, r, 0.55 Ω Rotor resistance referred to a stator winding phase: r:-0.51 Ω Stator leakage inductance, L,-4.4 mH Rotor leakage inductance referred to a stator winding phase,1'-4.4 mH Magnetising inductance L-65 mH How many pole pairs has the motor? 12] a. Calculate the nominal power factor of the...
The output torque of a motor is 69.2 lb-ft when it operates at 950 rpm. Calculate the losses in the machine and its efficiency if, under this condition, the power input is 10900 watts. Topic: DC MOTOR: Efficiency and Power Losses
6. A 3-phase 2.2 kV 25 Hz squirrel cage induction motor draws a line current of 224 A and a total power of 777 kW when operating at full load. The full-load speed is 245 rpm. The stator is wye connected and has an effective resistance per phase of 0.125 Ω. The stator iron (core) loss is 8.88 kW; friction and windage losses are 4.54 kW. Calculate at full-load conditions: b. power supplied to the rotor, a. the power factor;...
2. Calculate how much output torque a motor will produce if it has a displacement of 13 in (213 cm”) and is subjected to 240 psi (16.5 bar).
Problem # 3: Induction Motor Analysis [30 points] The parameters of the per phase equivalent circuit of a three phase wye-connected, 220 V (line- line, rms) 10 hp, 60 Hz, six-pole induction motor are given as: Ri = 0.3 Ohm, R2-0.15 Ohm, Xi-0.5 Ohms, X2= 0.2 Ohm, Xm-15.0 The total friction, windage and core losses add up to be a constant of 400 W. For a slip of 0.025 with motor operating at rated frequency and stator voltage, calculate the...
A 12-pole, brushless, DC motor has a no-load speed of 5000rpm and a stall torque of 50 in-oz when operating at rated voltage of 60V. Testing shows that no-load speed and stall torque vary linearly with applied voltage. Also, with a constant applied voltage the speed decreases linearly as delivered torque increases. Calculate the following: Torque that the motor delivers at 2000 rpm when operated at rated voltage. T a) b) Fundamental frequency of the applied voltage waveform at this...