A motor delivers 500 hp to the shaft, which is tubular and has anPart A outer...
A motor delivers 500 hp to the shaft, which is tubular and has an outer diameter of 3 in. The allowable shear stress for the material is tau_allow = 25 ksi. If the shaft is rotating at 100 rad/s, determine its largest inner diameter to the nearest 1/8 in.
Alt h. 10- The motor delivers 40 hp to the 304 stainless steel shaft while it rotates at 20 Hz. The shaft is supported on smooth bearings at A and B, which allow free rotation of the shaft. The gears C and D fixed to the shaft remove 25 hp and 15 hp, respectively. Determine the diameter of the shaft to the nearest 1/8 in. if the allowable shear stress is 8 ksi and the allowable angle of twist of...
1. The motor in the figure below delivers 150 hp while turning at a constant rate of 3600 rpm at A. Using the belt and pulley system this loading is delivered to the steel blower shaft BC a. Determine the torque output of the motor. b. What is the force in the belt. c. What is the torque delivered to the blower shaft. d. What is the angular frequency of the blower shaft and power delivered to the blower. How...
Question 2: The shaft ABC shown in the figure is driven by a motor that delivers 300kW at a rotational speed of 32 rev/sec. The gears at B and C take out 120k W and 180kW respectively. diameter of the shaft if the allowable shear stress is 50MPa, the allowable angle of twist between points A and C is 4° and G- 75GPa. of the two parts of the shaft are Li = 1.5m and L,-0.9m. Determine the required Motor...