A mercury barometer reads 744 mm on the roof of a building and 761 mm on the ground. Assuming a constant value of 1.29 kg/m3 for the density of air, determine the height of the building.
A mercury barometer reads 744 mm on the roof of a building and 761 mm on...
A mercury barometer reads 745 mm on the roof of a building and 763 mm on the ground. Assuming a constant value of 1.29 kg/m3 for the density of air, determine the height of the building
mercury barometer reads 745 mm on the roof of a building and 763 mm on the ground. Assuming a constant value of 1.29 kg/m3 for the density of air, determine the height of the building.
3. We learned that a column of mercury in a barometer is around 760 mm in height. We also learned that a water barometer would have to be over 10 m tall. What would be the height of a column of isopropyl alcohol if it were used in a barometer? The density of isopropyl alcohol 785 kg/m3.
2. The basic barometer can be used to measure the height of a building. If the barometric readings at the top and at the bottom of a building are 675 and 695 mmHg, respec- tively, determine the height of the building. Take the densi- ties of air and mercury to be 1.18 kg/m2 and 13,600 kg/mº, respectively. 3. Freshwater and seawater flowing in parallel horizon- tal pipelines are connected to each other by a double U-tube manometer, as shown in...
1. A student reads a barometer in the laboratory and finds the prevailing atmospheric pressure to be 699 mm Hg. Express this pressure in atmospheres, kilopascals, torrs, pounds per square inch, and pascals. Hint: 1 atm = 101.3 kPa = 760 torr = 760 mm Hg = 14.69 psi = 1.013×105 Pa mm Hg atm kPa torr psi Pa 699 2. An automobile tire is inflated to a pressure of 29.2 psi. Express this pressure in atmospheres, kilopascals, inches Hg,...
Question 8 A 240-km/h wind blowing over the flat roof of a building causes the roof to lift off the building. If the house is 11 m × 7 m in size, estimate the mass of the roof in kg. Assume the roof is not nailed down. The density of air is 1.29 kg/m Selected Answer: Correct Answer: 220,990 22,524 ± 5% Monday, November 27,2017 9:11:50 PM EST
A barometer can measure atmospheric pressure using the variation of pressure with depth of a fluid. Vacuum (P 0) A glass tube is filled with mercury (p 13,600 kg/m3) and placed upside-down in a bowl that also contains mercury. O Determine the height h. Enter the value in mm but do not include the unit in your response. Pat O 1 atmosphere 1.01x105 Pa
Question 3. i. Define absolute pressure, gage pressure and vacuum pressure. ii. If a mercury barometer reads 720 mm Hg. Determine the atmospheric pressure in kPa and psi. (I psi -6.895 kPa. Density of Hg - 13.56 g/cc). Question 4 i. Define/explain energy, kinetic energy, potential energy and internal energy ii. Explain the contribution/mechanism of internal energy with sketch.
In principle many different liquids could be used in a barometer. Mercury is usually preferred by virtue of its low vapour pressure and high density. As part of a school project, you have decided to build a barometer using water. Assuming the maximum pressure that the instrument will need to read is 1.05 atm, determine the height of the column required if (a) you ignore the vapour pressure of water or (b) you take the vapour pressure of water (PH2O=3.17...
To determine the height of a building the pressure is measured at ground level and at the top. The pressure at the top is x=98 kPa and at ground level is y=101 kPa. Assuming air density constant and equal to 1.2 kg/m², and the acceleration of gravity g=9.8 m/s2, estimate the height of the building. Give your answer in meters. REQUIRED RELATIVE ACCURACY +/-0.196