Asynchronous slip-ring motor with 50 Hz frequency, 380/220 V
with full load values Pn = 50 HP, nn = 987 rpm, per phase;
- rotor circuit resistance 0.2 ohm,
- the stationary reactance is 0.5 ohm,
- the loadability coefficient is 2.1 and
- the number of pole pairs is 8.
a)Calculate the motor's full load torque, tipping torque and idle
speed and number of revolutions under maximum load.
b)To give the motor a maximum torque, calculate the resistance value that should be included in the rotor circuit.
c)Since the motor drives a workpiece with "Calendar-Moment
Characteristic" at 987 rpm under full load, calculate the
resistance value that must be taken into the rotor-per-phase cycle
to reduce the speed of the drive system to K * d / min.
Asynchronous slip-ring motor with 50 Hz frequency, 380/220 V with full load values Pn = 50...
4. A certain four-pole 240-V-rms 50-Hz delta-connected three-phase induction motor operates at slip 5% at full load and has rotational losses (windage + friction) of 100 W. The stator resistance per phase is 0.2 Ohm. The results of no-load and locked-rotor tests on this motor are as follows: No-load test Locked-rotor test Line-to-line input voltage: 240 V 45 V Input active power: 1100 W 1300 W Input line current: 10 A 30 A Using the tests data, determine parameters of...
4.6. A 460-V, 75 kW, 4-pole, delta-connected, 60-Hz, three- phase induction motor has a full-load slip of 5 percent, an efficiency of 92 percent and a power-factor of 0.87 lagging at full-load. At start-up, the motor develops 1.9 times the full load developed torque but draws 7.5 times the rated current at the rated voltage. This motor is to be started with an auto- transformer reduced-voltage starter. Assume the stator resistance and the stator core loss to be negligible. Calculate...
A 240-V, 20hp, four poles, 50 Hz, Y-connected induction motor has a full-load slip of 2 percent. What is the rotor speed of this motor at rated load? 1470 rpm 1420 rpm 1500 rpm 1400 rpm
Please use exact methods and not approximations! 7.15. A three-phase, 460 V, 60 Hz, 1760 rpm, wound-rotor induction motor has the following equivalent circuit parameters Ri=0.25 ohm : R'= 0.2 ohm : Xi = 1.2 ohm : X2,= 1.1 ohm : 'Ku = 35 ohm The motor is connected to a 3ph, 460V, 60Hz supply and is star-connected. Use the simplified equivalent circuit. Initially the external rotor resistance is set to zero. (a) Calculate the speed (in rpm) at which...
A 3-phase, 460 V, 1740 rpm, 60 Hz, 4-pole wound-rotor induction motor has the following parameters per phase: R1 = 0.25 Ω, ' 2R = 0.2Ω, ' 1 2 X = X = 0.5Ω, 30 m X = Ω. The rotational losses are 1700 W. With the rotor terminals short-circuited, find: 1. at starting: • current when started direct on full voltage, • a torque 2. at full load: • slip • current • ratio of starting current to full-load...
Consider a 50 kW, 3-phase, 380 V line-to-line, 50 Hz, 6 pole Y-connected wound-rotor induction motor. The stator winding ac resistance is 0.1 Ω/phase. The effective stator-to-rotor turns ratio is 2. The exciting branch is negligible. It is found that when an external resistor of 0.09 Ω/phase is connected to the rotor terminals maximum starting torque of 1150 Nm is obtained. a. Compute the internal mechanical power and the internal torque developed by this motor when it drives a load...
5 Marks) A 4-pole, 3 phase, 50 Hz, 230 V induction motor. Each phase of rotor winding b) has one-fourth the number of turns of each stator. The full-load speed is 1,455 rpm. The rotor resistance is 0.3 Ω and rotor standstill reactance is 1.0 Ω per phase. The rotor and stator windings are similar. Stator losses are equal to 50 Watts. Friction and windage losses are equal to 30 W. Calculate ) Blocked rotor voltage per phase. 2 Marks)...
1. A six pole, 240V, 50 Hz three phase squirrel-cage induction motor has a no-load speed of 103 rad/s and a speed regulation of 5% at rated load. Find the amount of slip (in rpm) at full load for this motor. 2.. A 2 HP, 240 VAC, 60 Hz, capacitor-start motor is 75% efficient and draws 10 A at full load. What is this motor's power factor at rated load? 3. A wound rotor, 3 phase induction motor in Mr....
4. A 50-kW, 460-V, 50-Hz, two-pole induction motor has a slip of 5 percent when operating a full-load conditions. At full-load conditions, the friction and windage losses are 700 W, and the core losses are 600 W. Find the following values for full-load conditions: (10 pts.) (a) The shaft speed in rpm (b) The output power in horse power (c) The load torque in lb-ft (d) The induced torque in lb-ft (e) The rotor frequency in hertz
3) A four pole 75 HP 50 Hz induction motor with an efficiency of 93.4% has equivalent resistance and equivalent reactance per phase of 0.3000and 0.78 000OTHE blocked rotor voltage per phase is 175V. If the rotor is turning at 1425 rpm, determine synchronous speed, slip, rotor impedance, rotor current, total three phase apparent power crossing the air gap, its active and reactive components, rotor power factor, shaft speed, mechanical power developed and developed torque. (30 Points)