WHATS THE DERATED AMPACITY OF (7)-10 AWG THHN COOPER CONDUCTORS IN A RACEWAY?
As per NEC Table 310.15 (B)(3)(a)
For 7 to 10 AWG conductors , derated ampacity is
70% of rated Ampacity for 7 to 9 conductors in raceway
50% of rated Ampacity for 10 conductors in raceway
**Please rate!!
WHATS THE DERATED AMPACITY OF (7)-10 AWG THHN COOPER CONDUCTORS IN A RACEWAY?
What is the table listed ampacity of a #1 AWG THW copper conductor in a raceway containing no more than three current carrying conductors, 400C, dry location?
If 11 current carrying conductors are to be installed in a raceway, their ampacity must be adjusted to _______________ % of their full current value.
If 22 - #6 AWG type THHN Copper conductors are placed in a single Electrical Metallic Tubing, EMT, conduit, the ampacity must be de-rated by what percent for this number of conductors?
10. What is the conductor ampacity required for a 20 KW, 240 volt central space heater? 11. What is the ampacity of three No. 4 THWN conductors installed in an ambient temperature of 30 degree Celsius? 12. What is the ampacity of three No. 3/0 conductors installed in free-air? 13. What is the ampacity of eight 4/O THHN conductors installed a raceway in an ambient temperature of 100 degreee F? 14. What is the ampacity of ten No. 6 THWN...
28
29
30
CHAPTER 6 Wiring Methods 153 24. Dimension a must be at least inches. 25. Dimension b must be at least inches (the conduits contain the same conductors). 26. Dimension e must be at least inches. 27. Do you foresee any difficulties in installing the conductors in these raceways? Explain. 28. The minimum size raceway for the following feeder conductors is: a. Three, 250 kcmil conductors with XHHW insulation b. One, 3/0 AWG conductor with XHHW insulation c....
Ten #3 AWG copper load carrying conductors with type THHW, 75oC insulation are installed in a rigid metal conduit, RMC. What is the final loaded allowable ampacity for each conductor?
what is the total space required to accomodate 10-8 AWG conductors in an electrical box? A-355 ml B-422.6 ml C-444.2 ml D-451 ml
Please show detailed work and write clearly. Thank you.
7. What is allowable ampacity of a 2/0 AWG aluminum type RHW conductor in an area with an ambient temperature of 135 °F?
what information needed?
3. Repeat Example 7.8, using a 100 kVA transformer and #3/0 AWG and #2 AWG cables for the SLs and SDs, respectively Show the procedure to arrive at the following answers (a) 0.72 pu A (b) 0.050 pu V Example 7.8 residential secondary distribution system. Assume that the distribution trans- Figure 7.11 shows former capacity is 75 kVA (use Table 7.1), all secondaries and services are single-phase three wire, nominally 120/240 V, and all SLs are of...
Class: Week 7 10. Where multiple power supplies serve the same de system, the dc side of each power su supply shall have a a. disconnecting means b. suitable ground c. removable conductor d. removable fuses 11. Generator accessories,including but not limited to, te electrically operated louver, ath altemate power accessories essential for generator operation, shall be arranged for automatic connection to source. a. transfer fuel pump c. environmental controls b. transfer circuit d. auviliary switching 12. Minimum ampacity of...