What are the three ways we will characterize a resistor in this lab? Lab is the...
What are the three ways we will characterize a resistor in this
lab? Lab is the Basic Measurements of Electircal Circuits
Consult both the lab worksheet and lab manual for this
information.
Answer will be 3 of the choices
A)Through use of Farraday's Law.
B)Single measurement from a multimeter.
C)Using the three colors on the band of the resistor to color code the value.
D)Use of Ohm's Law.
E)It will be a known value, like gravity.
Homework Answers
Correct choices will be
Single measurement from multimeter
Using three Colors on band of resistor to color code the value
Use of ohm's law
Hope this helps....
Add Answer to:
What are the three ways we will characterize a resistor in this
lab? Lab is the...
1(aji How do you use color code to identify the value of a carbon resistor? Include...
1(aji How do you use color code to identify the value of a carbon resistor? Include an example ii. How do you determine experimentally the equivalent resistance of resistors in series?. Ohm's Law Lab. The results to determine experimentally the resistance of a resistor are shown in Table 1.1 below by applying variable de voltage and measuring corresponding current (b) Table 1.1 Results Ohm's law Voltage V (volts) 0.0 0.5 1.0 1.5 12.0 2.5 3.0 Current I(mA) (ON, JB) 0.0000...
I am working on my Physics lab report where it was all about Direct Current Measurement...
I am working on my Physics lab report where it was all about Direct Current Measurement and Ohm’s Law. We had 5 different resistors and had to construct different circuits using a power supply, volt-ohm-milliammeter (VOM) and a digital multimeter to get measurements of resistance, voltage, and current. Nominal values of resistance and tolerance Resistor Nominal Resistance (Ohms) Tolerance (Ohms) R1 680 +/- 68 R2 1000 +/- 50 R3 1500 +/- 75 R4 4700 +/- 470 R5 10,000 +/- 500...
Pease answer questions 4 and 5! Thank you so much! 4. Connect the 2nd resistor in...
Pease answer questions 4 and 5! Thank you so much!
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 = ____________ A
Is the following statement true? I = I1 +...
please I need help with excel or matlab part. part 3 Lab 1 BASIC DATA PROCESSING...
please I need help with excel or matlab part. part 3
Lab 1 BASIC DATA PROCESSING PRE-LAB ASSIGNMENT 1. Read the lab manual carefully so you know what you have to do when you walk into the lab. 2. In a lab, the resistance of a resistor was measured using 50 samples giving the following values: 119.95 (6), 121.32 (5), 119.57 (7), 117.43(1), 120.76 (15), 120.67 (1), 119.78 (8), 121.43(3), 121.82(1), and 118.47 (3) 2 Estimate the average value of...
How do I calculate the “calculated current flowing through each resistor using Kirchhoffs junction rule and...
How do I calculate the
“calculated current flowing through each resistor using Kirchhoffs
junction rule and the measured values”? Please show your work.
Thank you!
Old Dominion University Physics 112 & 232 Lab 2. Use the EXTECH Digital M measure the individual resi "orange, black, brown" band Turn on the DMM and turn 2000 Ω position. 2 V 1.5 V Using wire leads with ab and alligator clip on opp banana plug end of a red wi 2) jack, and...
In this Lab you would connect resistors in various combinations then use the multi- meter to...
In this Lab you would connect resistors in various combinations then use the multi- meter to measure various currents and voltages. I have copied the schematics of the various circuits from the lab and completed portions of the data table with hypothetical (but highly probable) answers. Your task is to complete the data tables and answer the following questions. The value of a resistor can be determined by reading the colored stripes on the resistor. The color codes are given...
Fall 2019 ECEN 206 Lab 4 Thevenin Equivalent Circuits Due First week of November Introduction: This...
Fall 2019 ECEN 206 Lab 4 Thevenin Equivalent Circuits Due First week of November Introduction: This lab focuses on the Thevenin equivalent circuit and maximum power transfer theorems Complex circuits are often replaced with their Thevenin equivalent to simplify analysis. For example, in the analysis of large industrial power systems the Thevenin equivalent is used in short circuit studies. Maximum power transfer is also an important concept which allows the designer to determine an optimal design when power is a...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 an...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 and 3. It is important to answer the exercises correctly in each labl you should include the appropriate prefix for the unit in the Numerical Value We will not be Volt using the Volt-Ohm meter (VOM) for this lab, so skip the parts that ask for VOM measurements. The parts we You do need to complete Exercises1 Note that in...
Answer 4 & 5 please! thank you! R values = Resistor value, R1 = 990 Ohms...
Answer 4 & 5 please! thank
you!
R values =
Resistor value, R1 = 990 Ohms
Resistor value, R2 = 2050 Ohms
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 =...
I need aome help with this part of my lab. thank you! Kirchoff's Laws 4. Now...
I need aome help with this part of my lab. thank you!
Kirchoff's Laws 4. Now click on this link, which is another circuit I modified and created for this lab: http://tinyurl.com/y8toda84 A. Do not Click run/Stop. This is a circuit that has elements that are neither series nor parallel, as well as multiple voltage sources. The best way for us to analyze this circuit is to use Kirchoff's laws. From the text here are Kirchoff's laws: 1) The sum...
1(aji How do you use color code to identify the value of a carbon resistor? Include an example ii. How do you determine experimentally the equivalent resistance of resistors in series?. Ohm's Law Lab. The results to determine experimentally the resistance of a resistor are shown in Table 1.1 below by applying variable de voltage and measuring corresponding current (b) Table 1.1 Results Ohm's law Voltage V (volts) 0.0 0.5 1.0 1.5 12.0 2.5 3.0 Current I(mA) (ON, JB) 0.0000...
Pease answer questions 4 and 5! Thank you so much!
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 = ____________ A
Is the following statement true? I = I1 +...
please I need help with excel or matlab part. part 3
Lab 1 BASIC DATA PROCESSING PRE-LAB ASSIGNMENT 1. Read the lab manual carefully so you know what you have to do when you walk into the lab. 2. In a lab, the resistance of a resistor was measured using 50 samples giving the following values: 119.95 (6), 121.32 (5), 119.57 (7), 117.43(1), 120.76 (15), 120.67 (1), 119.78 (8), 121.43(3), 121.82(1), and 118.47 (3) 2 Estimate the average value of...
How do I calculate the
“calculated current flowing through each resistor using Kirchhoffs
junction rule and the measured values”? Please show your work.
Thank you!
Old Dominion University Physics 112 & 232 Lab 2. Use the EXTECH Digital M measure the individual resi "orange, black, brown" band Turn on the DMM and turn 2000 Ω position. 2 V 1.5 V Using wire leads with ab and alligator clip on opp banana plug end of a red wi 2) jack, and...
In this Lab you would connect resistors in various combinations then use the multi- meter to measure various currents and voltages. I have copied the schematics of the various circuits from the lab and completed portions of the data table with hypothetical (but highly probable) answers. Your task is to complete the data tables and answer the following questions. The value of a resistor can be determined by reading the colored stripes on the resistor. The color codes are given...
Fall 2019 ECEN 206 Lab 4 Thevenin Equivalent Circuits Due First week of November Introduction: This lab focuses on the Thevenin equivalent circuit and maximum power transfer theorems Complex circuits are often replaced with their Thevenin equivalent to simplify analysis. For example, in the analysis of large industrial power systems the Thevenin equivalent is used in short circuit studies. Maximum power transfer is also an important concept which allows the designer to determine an optimal design when power is a...
Notes for lab dc02-Resistors and the Color Code will skip are Part 2 e, g: Part 4; Exercises 2, 4,5,6 and 3. It is important to answer the exercises correctly in each labl you should include the appropriate prefix for the unit in the Numerical Value We will not be Volt using the Volt-Ohm meter (VOM) for this lab, so skip the parts that ask for VOM measurements. The parts we You do need to complete Exercises1 Note that in...
Answer 4 & 5 please! thank
you!
R values =
Resistor value, R1 = 990 Ohms
Resistor value, R2 = 2050 Ohms
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 =...
I need aome help with this part of my lab. thank you!
Kirchoff's Laws 4. Now click on this link, which is another circuit I modified and created for this lab: http://tinyurl.com/y8toda84 A. Do not Click run/Stop. This is a circuit that has elements that are neither series nor parallel, as well as multiple voltage sources. The best way for us to analyze this circuit is to use Kirchoff's laws. From the text here are Kirchoff's laws: 1) The sum...
Most questions answered within 3 hours.
-
Find the complete optimal solution to this linear programming
problem. Max 5x + 3y s.t. 2x...
asked 22 minutes ago -
The pH of an acetate buffer was determined to be 4.76. Then, a
few drops of...
asked 25 minutes ago -
a sample of size 1500 is used to find a confidence
interval for the percentage of...
asked 34 minutes ago -
Explain in detail the differences between qualitative and
quantitative forecasts. Include at least two examples of...
asked 38 minutes ago -
Differentiate between response time and throughput.
Explain how the physical design of a database influences
performance...
asked 40 minutes ago -
Write MATLAB code to plot the following
waveforms.
Rectangular pulses:
????(?)
????(? − ?)
????(?/?) ...
asked 40 minutes ago -
4. Adam’s Inc.’s outstanding common stock is currently selling
in the market for $28. Dividends of...
asked 51 minutes ago -
question
you were
asked to create a regression that will predict the amount of saving
for...
asked 58 minutes ago -
If tcalc = -2.78, tcrit = 1.96, H0: Mu > Mu0, and Xbar <
Mu0, what...
asked 1 hour ago -
Circular distribution
•Suppose two birds are flying, one is flying from the north and
the other...
asked 1 hour ago -
please answer all... it all counts as a discussion problem
1a qualitative data and proportions: Suppose...
asked 1 hour ago -
Typing The Answer Is Mandatory
Temperature is a measure of heat. More heat means that more...
asked 1 hour ago