A 192kg uniform beam is hinged at one end, and the other end is supported by a cable that is 21 degrees to the vertical. The beam is 2 meters long, and is 14 degrees above the horizontal. Calculated the direction of the force in the hinge with respect to the horizontal. Assume the cable has no mass.
A 192kg uniform beam is hinged at one end, and the other end is supported by...
A 207.8 kg uniform, a horizontal beam is hinged at one end and at the other is supported by a cable that is at 26 degrees to the left of the vertical. The beam is 2.63 m long. Calculate the direction of the force at the hinge (measured with respect to the horizontal). Answer with a number in degrees
In the figure, one end of a uniform beam of weight 460 N is hinged to a wall; the other end is supported by a wire that makes angles theta = 26 degree with both wall and beam. Find (a) the tension in the wire and the (b) horizontal and (c) vertical components of the force of the hinge on the beam.
In Fig. 12-33, one end of a uniform beam of mass 40.0 kg is hinged to a wall: the other end is supported by a wire that makes angles theta = 30.0degree with both wall and beam. Find the tension in the wire and the magnitude and angle from the horizontal of the force of the hinge on the beam.
A 15 kg uniform beam, 2 m in length, is supported at it's end by a cable as shown below. The angle between the cable and the horizontal is 45 degrees. 2. Cable Beam Find the horizontal and vertical components of the force from the hinge (left end of the beam) acting on the beam a. b. If the tension in the cord exceeds 115N, the cord will break. Will placing a 5 kg mass at the right end of...
A 150kg uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. a) Calculate the magnitude of the vertical component of the force that the wall exerts on the left of the beam if the angle between the cable and the horizontal is theta = 42 degrees.
One end of a uniform beam that weighs 2.95 x 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in the figure below. Find the horizontal and vertical components of the force exerted by the hinge pin on the beam. (Assume ?1-370 and ?2-329. Indicate the direction with the sign of your answer. Assume that the +x direction points horizontally outward from the wall and that...
A 2.0 m long uniform beam is supported by a cable as shown below. The cable is at an angle of 35 degree to the horizontal and has a tension of 300 N. Find the vertical and horizontal forces of the hinge and the mass of the beam.
A 4-m long, 150-kg steel beam is attached to a wall with one end connected to a hinge that allows the beam to rotate up and down. The other end of the beam is held in a horizontal position with a cable that makes a 27° angle with the beam and is attached to the wall. A mass of 75 kg is hung from the beam 3 meters away from the hinge (see (Figure 2)). What is the vertical component of...
A uniform horizontal strut weighs 280.0 N. One end of the strut is attached to a hinged support at the wall, and the other end of the strut is attached to a sign that weighs 190.0 N. The strut is also supported by a cable attached between the end of the strut and the wall. Assume that the entire weight of the sign is attached at the very end of the strut. Restaurane Find the tension in the cable (in...
A 1400-N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A 1960-N crate hangs from the far end of the beam. Using the data shown in the figure, find (a) the magnitude of the tension in the wire and the magnitudes of the (b) horizontal and (c) vertical components of the force that the wall exerts on the left end of the beam.