A commercial food waste grinder in which the final shaft rotates at between 40 and 44 rpm is to be designed. The input is from an electric motor running at 850 rpm and delivering 0.50 hp. Design a double-reduction spur gear train for the grinder.
In your gear train designs, provide calculations of the following:
a. The rotational speed of the gear
b. The velocity and the gear ratio for the gear pair
c. The pitch diameter of the pinion and the gear
d. The center distance between the shafts carrying the pinion and the gear
e. The pitch line speed for both the pinion and the gear
f. The torque on the pinion shaft and on the gear shaft
g. The tangential force acting on the teeth of each gear
h. The radial force acting on the teeth of each gear
i. The normal force acting on the teeth of each gear
j. The schematic diagram of the whole assembly design
Your design concept idea should be an assembly. It should be designed by using SolidWorks and should include at least one component structural analysis by SolidWorks Simulation software. Design a report with the following content. This project is simple in scope, has a rather defined market presence, is very adaptable to structural analysis without 2 extensive product variations. These projects fit the design / analyze / build concept we are trying to simulate.
A commercial food waste grinder in which the final shaft rotates at between 40 and 44...
Component design Spur gear analysis A speed-reducer has 200 full-depth teeth, and the single reduction spur-gear gearset has 22 and 60 teeth. The diametral pitch is 4 teeth/in and the face width is 3-1/4 in. The pinion shaft speed is 1145 rpm. The life goal of 5 year 24 hours per day service is about 3(10 9) pinion revolutions. The absolute value of the pitch variation is such that the transmission accuracy level number is 9. The materials are 4340...
power = 3 kW if need any more information please ask !!! You are the designer and you have been asked to design a speed reducer (gearbox) that will take power from the shaft of an electric motor rotating at 1500 rpm and deliver it to a machine that is to operate at approximately at 200 rpm Assume that you have decided to use spur gears to transmit the power [A power equal to the last one digits of your...
Design Problem Design a speed reducer gear box that will take 1.5 kW power from an electric motor rotating at 3000 rpm (clockwise) and deliver it to a machine which operates at 2 different speeds, 1000 rpm (clockwise) and 500 rpm (counter-clockwise). Use Spur Gears with 20° pressure angle and 5mm module. Gear box should be of smallest possible size. The gear shift mechanism is not the part of the design A 2-speed double-reduction speed reducer is shown in the...
Desgin 0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
2. Consider the triple speed reduction gear box shown in Figure 1. All the gears are made with a diametral pitch of 16 in. The input of the gear train is gear A, and the output is gear G. The gear train transmits an input toque of 250 lb-in, at a speed of 2,500 rpm clockwise. The number of teeth on each gear is given as follows: NA 24 teeth, Na = 60 teeth, Nc 20 teeth, No 58 teeth,...
Problem 1. Design a reverted gear train for a transmission with three speeds and reverse. For an input speed of 450 rpm to the driving shaft (green), the driven shaft (teal) should have output forward speeds of 75, 300, and 450 rpm, and an output reverse speed of 150 rpm. Assume all gears have a diametral pitch of 10. Gear A (24 teeth) and Gear D (36 teeth) are in constant mesh. Determine the numbers of teeth for ALL six...
You work for a gearbox company and have been charged with helping to design a geared countershaft for a speed reducing gearbox. The gearbox consists of a compound reverted gear train as shown below and is to be designed for an exact 16:1 speed reduction ratio. The input motor provides 10-horsepower which is carried through the gear train and operates at a speed of 2,000 rpm. You are asked to consider spur gears with a 20° pressure angle and 4...
Desgin 0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Figure Q1 shows a gear train consists of four spur gears A, B, C and D to be designed for a specific mechanism. The power transmitted by gear A is 5 kW at rotational speed of 720 rpm counterclockwise direction. Number of teeth (N) for gears A,B,C and D are respectively 20, 50, 30 and 60. The module and pressure angle of the gears are respectively 4 mm and 20o . Determine followings: (a) Tangential and radial forces between gears...
A transfer shaft with two spur gears shown below: Input Gear 1 Output Gear Torque Bearing 1 Gear 1 Gear 2 Bearing 2 B OTO 4" 4" 4" 4 . . Weight Ibf Teeth number Pressure angle Po (diametric pitch) teeth/in Gear A 50 20° 6 Gear C 2 25 20° 6 Deep groove ball bearings at B and D. Pitch diameter of the gear is equal to the teeth number divided by diametric pitch. Shaft speed = 3000 rpm....