A 240V ,1500rpm separately excited motor has the armature resistance of Ra=0.1ohm.The motor current is 30A.
a) Draw the equivalent circuit of the motor
b) Find the armature current (Ia) in ampere
A 240V ,1500rpm separately excited motor has the armature resistance of Ra=0.1ohm.The motor current is 30A....
A 250V, 50A separately excited DC motor has armature resistance of 0.8 ohms (including brushes) and field resistance of 100 ohms. Kf for this motor is 1.5 V/(A.rad/sec). The armature circuit can carry up to 50A for a short time period. It is desired to run it with a 250 V voltage source in no load conditions with the speed of 1500 r/min. a) Explain the required equipment and steps. b) Draw the circuit for steady-state operation with the speed...
The speed of a separately excited de motor is controlled by a one-phase full-wave converter. The field circuit is also controlled by a full-wave converter and the field current is set to its maximum value. The AC supply voltage to the armature and field converters is one-phase, 400V, 50Hz. The armature resistance Ra 0.232, the field circuit resistance Rf- 1812, and the motor voltage constant is Kv 1.3V/A - rad/s. The armature current corresponding to the load demand Ia 42A...
P4-17) A 240 V separately exited dc motor has an armature resistance of Ra = 006 Ω, when it is connected to a 240 V supply, it draws 90 A from the supply and rotates at 1200 rpm. Find the torque developed by the motor at this operating condition. If the torque developed is 280 Nm for the same excitation and same supply voltage, then find the speed and armature current. a) b)
(i) A 220 volts, 825 rpm, 125 A separately excited DC motor has an armature resistance of 0.05 2. It is fed from a single phase fully controlled rectifier with an ac source of 225 Volts, 50Hz. Assuming continuous conduction calculate (a) Firing angle for 1/4"hrated motor torque and 750 rpm (b) Motor speed for a=160 degrees and rated torque 5 Marks (ii) Draw and explain with neat circuit diagram of a DC drive circuit, which works with positive output...
Problem 2 A separately excited DC motor is characterized by the followng intormation Armature resistance Ra-5 2 armature inductance La . very large, Field resistance RS200 Ω, ted voltage Vt 200 V, and an inertia constant J-12 kg m Neglecting friction losses and assuming no-saturation in the machine magnetic core system, answer the folowing questions: Part 1: (6 marks) he motor a as shown in figure 2a. The motor drives a constant power load of vaue 1 40375 hp (ie...
A 230 V, 1000 rpm, 30 A separately excited motor has armature resistance and inductance of 0.7 Ω and 50 mH respectively. Motor is controlled in regenerative braking by a chopper operating at 800 Hz from a dc source of 230 V. Assuming continuous conduction a) Calculate duty ratio of chopper for rated torque and the speed of 800 rpm. b) What will be the motor speed for duty ratio of 0.6 and rated motor torque? c) What will be...
A separately-excited DC traction motor of a metro train is in series connection, i.e., the armature and the field windings are connected in series with a common DC power source. The voltage of the DC power source is I (a) Please show that the angular velocity of the rotor is KT K where o is the is the angular velocity of the rotor, Ra is the resistance of the armature, Rris the resistance of the field windings, T is the...
i. The speed of a separately excited dc motor is controlled by a one-phase full-wave converter. The field circuit is also controlled by a full-wave converter, see V supply) Vs pk-150V Ra-0.310 L Rf 152O E-63V α. 1-35A Figure 3 The AC supply voltage to the armature and field converters is one-phase, 150Vpeak, 50Hz. The armature resistance Ra-0.31Ω, the field circuit resistance Rf-152Ω, and the motor voltage constant is Kv-1.3V/A. The armature current corresponding to the load demand la-35A The...
3) A saperately excited DC motor has the following parameters: Ra = 10 Ke = 0.4 V/rpm. Wb O = 0.2 Wb The motor speed is controlled by a full-wave bridge rectifier. The firing angle is set at 45, and the average speed is 1500 rpm. The applied AC voltage to the input of the bridge rectifier is 220Vrms - 50 Hz. a) (10p) Please draw the complete circuit. (converter + motor) b) (10p) Please find the armature current. c)...
3) A saperately excited DC motor has the following parameters: Ra = 10 Ke = 0.4 V/rpm. Wb 0 = 0.2 Wb The motor speed is controlled by a full-wave bridge rectifier. The firing angle is set at 45°, and the average speed is 1500 rpm. The applied AC voltage to the input of the bridge rectifier is 220Vrms - 50 Hz. a) (10p) Please draw the complete circuit. (converter + motor) b) (10p) Please find the armature current. c)...