An ac generator has a frequency of 5.5 kHz and a voltage of 30 V. When an inductor is connected between the terminals of this generator, the current in the inductor is 30 mA. What is the inductance of the inductor? L= ?
Given that Ac generator frequency = 5.5Khz
Voltage = 30 volts.
Now current through the inductor = 30mA
For the case given, current through the inductor will be = V/(L) where L is the inductive reactance.
As = 2*pi*f
Thus I = V/(2*pi*f*L)
So L = V/(2*pi*f*I)
L = 30/(2*pi*5.5*10^3*30*10^(-3))
L = 30/ 1036.72 = 0.0289 Henry
L = 0.0289 Henry = 28.9 mH. Ans
An ac generator has a frequency of 5.5 kHz and a voltage of 30 V. When...
An ac generator has a frequency of 7.9 kHz and a voltage of 41 V. When an inductor is connected between the terminals of this generator, the current in the inductor is 47 mA. What is the inductance of the inductor? L =
An ac generator has a frequency of 2.1 kHz and a voltage of 240 V. An inductance L1 = 4.0 mH is connected across its terminals. Then a second inductance L2 = 10 mH is connected in parallel with L1. Find (a) the current that the generator delivers to L1 and (b) to the parallel combination.
An ac generator has a frequency of 2.0 kHz and a voltage of 240 V. An inductance L1 = 6.1 mH is connected across its terminals. Then a second inductance L2 = 9.5 mH is connected in parallel with L1. Find (a) the current that the generator delivers to L1 and (b) to the parallel combination.
23.14 An ac generator has a frequency of 2.3 kHz and a voltage of 240 V. An inductance L1 = 4.0 mH is connected across its terminals. Then a second inductance L2 = 9.0 mH is connected in parallel with L1. Find (a) the current that the generator delivers to L1 and (b)to the parallel combination.
An ac generator has a frequency of 1180 Hz and a constant rms voltage. When a 464-Ω resistor is connected between the terminals of the generator, an average power of 0.240 W is consumed by the resistor. Then, a 0.0730-H inductor is connected in series with the resistor, and the combination is connected between the generator terminals. What is the average power consumed in the inductor–resistor series circuit?
9 An ac generator has a frequency of 1270 Hz and a constant rms voltage. When a 463-ohm resistor is connected between the terminals of the generator, an average power of 0.270 W is consumed by the resistor. Then, a 0.0700-H inductor is connected in series with the resistor, and the combination is connected between the generator terminals. What is the average power consumed in the inductor-resistor series circuit?
An ac generator with a frequency of 1.55 kHz and an rms voltage of 20.8 V is connected in series with a 2.00 kΩ resistor and a 307 mH inductor. -Part A What is the power factor for this circuit? cos(ϕ)= -Part B What is the average power consumed by this circuit? (Units in W)
hen only a resistor is connected across the terminals of an ac generator (113 V) that has a fixed frequency, there is a current of 0.505 A in the resistor. When only an inductor is connected across the terminals of this same generator, there is a current of 0.408 A in the inductor. When both the resistor and the inductor are connected in series between the terminals of this generator, calculate the following. (a) the impedance of the series combination...
An ac generator supplies an rms voltage of 140 V and an rms current of 2.0 A at an angular frequency of of 500 rad/s. The generator is connected in series with an inductor, a 200-µF capacitor and an 56-Ω resistor. What is the inductance of the inductor?
An ac generator supplies an rms voltage of 5.00 V to an RL circuit. At a frequency of 20.0 kHz the rms current in the circuit is 45.0 mA; at a frequency of 26.0 kHz the rms current is 40.0 mA. What is the values of L in this circuit? What is the values of R in this circuit?