A particular I/O device provides a single byte of data to the processor every 45 ms....
A particular I/O device provides a single byte of data to the processor every 45 ms. What is the minimum required throughput of any bus that would connect this device to the CPU?
Homework Answers
given :-
single byte of data to processor every 45 ms.
if its a synchronous bus then minimum throughput will be:-
max is 4 bytes every 45 ms= 4 bytes/ 45 ms
= 4 Mb/ 0.045 s (as 1 sec= 1000 ms)
= 88.88 Mb/sec
so min throughput of any bus will be 88.88 Mb/sec.
Add Answer to:
A particular I/O device provides a single byte of data to the
processor every 45 ms....
Which BUS defines the size of the processor? a. The system bus. b. The data bus....
Which BUS defines the size of the processor? a. The system bus. b. The data bus. c. The address bus. d. The control bus. What are the two main parts, the 8086 CPU is divided into? a. Control Unit and Registers. b. ALU and Control Unit. c. Memory and I/O. d. Bus interface unit (BIU) and Execute unit (EU). Typically, a BUS consists of multiple communication paths or lines. Each line is capable of transmitting a signal representing binary 1...
1. Distinguish between control processing unit (CPU), core and processor. 2. Briefly explain how short-I/O-wait interrupt...
1. Distinguish between control processing unit (CPU), core and processor. 2. Briefly explain how short-I/O-wait interrupt can improve the exexution of user program 3. What is the relationship between: (i) the width of address bus and the memory capacity (ii) the width of data bust and the data transfer
A given processor requires 1000 cycles to perform a context switch and start an interrupt handler...
A given processor requires 1000 cycles to perform a context switch and start an interrupt handler (and the same number of cycles to switch back to the program that was running when the interrupt occurred), or 500 cycles to poll an I/O device. An I/O device attached to that processor makes 150 requests per second, each of which takes 10,000 cycles to resolve once the handler has been started. By default, the processor polls every 0.5 ms if it is...
T F Xilinx's SDK assembler supports both FOR statements, but not wHILE statements T F In the ARM processor, immediate operands are stored in data memory, and not in the opcode T F In ARM proc...
T F Xilinx's SDK assembler supports both FOR statements, but not wHILE statements T F In the ARM processor, immediate operands are stored in data memory, and not in the opcode T F In ARM processor instructions, one but not both operands can come from main T F In the ARM processor, a single load/store instruction T F It is possible for a microprocessor to use a virtual TCache memory is typically much faster and much larger than main memory...
A device is sending out data at the rate of 1000 bps. The time required to send out a single character is: O 1 sec O 1 msec O 8 msec If the baud rate for a 16-0AM signal is 2000 baud, what is t...
A device is sending out data at the rate of 1000 bps. The time required to send out a single character is: O 1 sec O 1 msec O 8 msec If the baud rate for a 16-0AM signal is 2000 baud, what is the bit rato in kbps? 12 A Mavina to another question will save this response uestion 6 elements are encoded as one signal dlement th bit roe s 24000pa, and Ce 1, the vaue of signal...
Problem 8, chapter 11-I/O Management And Disk Scheduling, Stalling Operating system
Calculate how much disk space (in sectors, tracks, and surfaces) will be requiredto store 300,000 120-byte logical records if the disk is fixed-sector with 512bytes/sector, with 96 sectors/track, 110 tracks per surface, and 8 usable surfaces.Ignore any file header record(s) and track indexes, and assume that records cannotspan two sectors.---------------------------------------------------------------------------------------------------P4Consider the disk system described in Problem 3, and assume that the disk rotatesat 360 rpm. A processor reads one sector from the disk using interrupt-driven I/O,with one interrupt per byte....
(b) There ane 45 clientscnaLAN with a single database server. Each client issues a request every ...
(b) There ane 45 clientscnaLAN with a single database server. Each client issues a request every 10 secoeds on an average to the database server. The server processes the request i approximately 0.5 seconds Clients requests are assumed to fellow the Poisson distribution and server's processing time follows exponential distribution. What is the system utilization? )How long does an average request take on the server (waiting if any and processing What is the average number of requests waiting to be...
I require an unplagiarised solution for the question below A. Consider the usage of critical word...
I
require an unplagiarised solution for the question below
A. Consider the usage of critical word first and early restart on L2 cache misses. Assume a 1 MB L2 cache with 64 byte blocks and a refill path that is 16 bytes wide. Assume that the L2 can be written with 16 bytes every 4 processor cycles, the time to receive the first 16 byte block from the memory controller is 120 cycles, each additional 16 byte block from main...
01. Consider the stagevise single cycle CPU with the circuit as given on the attached sheet....
01. Consider the stagevise single cycle CPU with the circuit as given on the attached sheet. The following are the latencies of each component: Instruction memory 180 ps Add 4 unit Mux Registers Main Control ALU Control ALU AND Shift Left2 Sign Extend Branch Adder Data Memory 60 ps 15ps 120 ps 50 ps, 25 ps, 150 ps 5 ps 10 ps(Shiftleft2jump also) 15 ps 60 ps 150 ps C) Do a stagewise latency analysis of the circuit. Write down...
Looking for a bit of help with he below question; part C in particular. Thanks in...
Looking for a bit of help with he below question; part C in
particular. Thanks in advance!
2 There are two jack screw assemblies both with an ISO Metric Trapezoidal 'Tr 16 x 3' screw, one single-thread and the other double-thread, to raise and lower a load of 450 kg. A ball-thrust bearing forms part of the assembly and therefore collar friction is negligible The coefficient of sliding friction for both screws is 0.08 (a) For each assembly, determine: the...
A given processor requires 1000 cycles to perform a context switch and start an interrupt handler (and the same number of cycles to switch back to the program that was running when the interrupt occurred), or 500 cycles to poll an I/O device. An I/O device attached to that processor makes 150 requests per second, each of which takes 10,000 cycles to resolve once the handler has been started. By default, the processor polls every 0.5 ms if it is...
T F Xilinx's SDK assembler supports both FOR statements, but not wHILE statements T F In the ARM processor, immediate operands are stored in data memory, and not in the opcode T F In ARM processor instructions, one but not both operands can come from main T F In the ARM processor, a single load/store instruction T F It is possible for a microprocessor to use a virtual TCache memory is typically much faster and much larger than main memory...
A device is sending out data at the rate of 1000 bps. The time required to send out a single character is: O 1 sec O 1 msec O 8 msec If the baud rate for a 16-0AM signal is 2000 baud, what is the bit rato in kbps? 12 A Mavina to another question will save this response uestion 6 elements are encoded as one signal dlement th bit roe s 24000pa, and Ce 1, the vaue of signal...
(b) There ane 45 clientscnaLAN with a single database server. Each client issues a request every 10 secoeds on an average to the database server. The server processes the request i approximately 0.5 seconds Clients requests are assumed to fellow the Poisson distribution and server's processing time follows exponential distribution. What is the system utilization? )How long does an average request take on the server (waiting if any and processing What is the average number of requests waiting to be...
I
require an unplagiarised solution for the question below
A. Consider the usage of critical word first and early restart on L2 cache misses. Assume a 1 MB L2 cache with 64 byte blocks and a refill path that is 16 bytes wide. Assume that the L2 can be written with 16 bytes every 4 processor cycles, the time to receive the first 16 byte block from the memory controller is 120 cycles, each additional 16 byte block from main...
01. Consider the stagevise single cycle CPU with the circuit as given on the attached sheet. The following are the latencies of each component: Instruction memory 180 ps Add 4 unit Mux Registers Main Control ALU Control ALU AND Shift Left2 Sign Extend Branch Adder Data Memory 60 ps 15ps 120 ps 50 ps, 25 ps, 150 ps 5 ps 10 ps(Shiftleft2jump also) 15 ps 60 ps 150 ps C) Do a stagewise latency analysis of the circuit. Write down...
Looking for a bit of help with he below question; part C in
particular. Thanks in advance!
2 There are two jack screw assemblies both with an ISO Metric Trapezoidal 'Tr 16 x 3' screw, one single-thread and the other double-thread, to raise and lower a load of 450 kg. A ball-thrust bearing forms part of the assembly and therefore collar friction is negligible The coefficient of sliding friction for both screws is 0.08 (a) For each assembly, determine: the...
Most questions answered within 3 hours.
-
Write a program to solve the Josephus problem, with the following
modification:
Sample Input:
./a.out n...
asked 4 minutes ago -
At the start of a CD it is spinning at a rate of 525 rpm
(revolutions...
asked 40 minutes ago -
4. Without doing any calculations, predict whether the observed
∆T would increase, decrease or remain the...
asked 1 hour ago -
Based on the range, which of the following sets of scores has
the greatest variability? 3,...
asked 3 hours ago -
Ripples in a pond travel at a velocity of 3 m/s with one peak
passing a...
asked 2 hours ago -
A man stands on the roof of a building of height 13.0 mm and
throws a...
asked 2 hours ago -
The extent to which assets are financed by borrowed funds and
other liabilities is indicated by:...
asked 4 hours ago -
Explain in detail
Germany is the fifth largest economy
explain what goods and services Germany specializes...
asked 4 hours ago -
The density of platinum is 21.45 g/mL. If a cube of platinum
with a mass of...
asked 4 hours ago -
Accounts Receivable
Sales
A/R Posting
Extended Sales Invoice
Packing Slip
Compare invoice to packing slip 2...
asked 4 hours ago -
Michaella, age 23, is a full-time law student and is claimed by
her parents as a...
asked 4 hours ago -
Why are polymers not typically casted into products?
asked 4 hours ago