In CIty A, the average wind speed is known to be about 4.72 m/s, while the average wind speed in city B is known to be about 8.19 m/s. Consider the power output given by Pout=1/2 ηρAv3. What is the ratio of energy output of the wind turbine in City B to City A?
Select one:
a. 0.58
b. 3.01
c. 5.22
d. 1.74
e. 0.19
In CIty A, the average wind speed is known to be about 4.72 m/s, while the...
-1. Consider a wind turbine of diameter 52 m. At a wind speed 16 m/s, the wind turbine reaches is maximum power output of 850 kW. What is the coefficient of performance at this wind speed?
2. A wind turbine has the maximum power output at the rated speed of 12 m/s and a rotor diameter of 82 meters. The cut-in and cut-out speeds for this type of wind turbine are 4 m/s and 23 m/s, respectively. The table below shows the annual wind data near a potential site for setting up a wind farm using this type of wind turbine and the power coefficient of the wind turbine at the specific wind speed. The air...
A wind-turbine has a propeller radius of 30 m, rated speed of 10 m/s and 30% efficiency at the rated speed. a) Calculate the rated power for this wind turbine. (air density is 1.2 kg/m). b) If this turbine produces 2 GW-h energy in one year, what is its capacity factor?
Find the power production (in MW) of a 25 m radius wind turbine if the average wind speed is 12 m/s and the efficiency of this turbine in converting kinetic energy of air to mechanical work is 10%? The density of air is 1.20 kg/m3 .
Question 30 6 points Save Answer (LO4) A wind turbine with a 40-m-diameter rotor is rotating at 21 rpm under steady winds at an average velocity of 14.7 m/s. The electrical power output from the generator is 350 kW. The efficiency of the gearbox is 93% and generator efficiency is 86%. Take the density of air to be 1.013 kg/m. Answer the following questions; use the white paper to work-out your calculations and then choose the correct answer from the...
An industrial wind turbine has blades that are 35 m long. On a 20?C day, wind at atmospheric pressure blows with a velocity of 12 m/s , and wind in the turbine wake only has a velocity of 11 m/s .(a) If we assume that all of the kinetic energy lost by the wind is converted to electrical energy by the turbine, then what is the power generated by this turbine? (density is 1.205 kg/m^3)(b) This turbine is rated as...
3. A wind turbine has blades, which sweep out an area of diameter 25 m 25m blades Fig. 5.1 (a) The wind is blowing directy towards the wind turbine at a speed of 12 m/s. At this wind speed, 7500 kg of air passes every second through the circular area swept out by the blades. U) Calculate the kinetic energy of the air travelling at 12 m /s, which passes through the circular area in 1 second Kinetic energy. The...
1. Consider a wind turbine of diameter 52 m, rated capacity 850 kW, installed at a site where the average wind power density = 700 W/m2. The total energy output over a year = 3240 MWh. What is the average power output ?
21. Determine the power output of a wind turbine whose blades are 12 m in diameter and when the wind speed is 6 m/s, the air density at sea level is about 1.2 kg/m3, and the maximum nower coefficient for this wind turbine is 0.35.
For this problem, consider a site which is experiencing a wind speed of 9.5 m/s. You are to calculate how much power there is in the wind in Watts at this moment as it flows through the rotor of a wind turbine. Please assume that the air temperature is 14 degrees C at hub height conditions and the pressure can be considered to be 99.78 kPA for a rotor diameter of 32 m. (answer to 0 decimal places)