Solve the Following Planetary Gear / Compound Gear Systems The motor is driven at 800 RPM. What i...
Not really sure how to solve this problem. It is a planetary
gear/ a compound gear.
The motor is driven at 800 RPM. What is the output speed and direction of Shafts 1 and 2? b. J-42 8-40 C-20 F-12 G-72 SHAFT MOTOR MN A-15 D-35 E-48 SHAFT 2 K-15
The motor is driven at 800 RPM. What is the output speed and direction of Shafts 1 and 2? b. J-42 8-40 C-20 F-12 G-72 SHAFT MOTOR MN A-15 D-35...
1. A two-stage compound gear is driven by a 20-hp motor that rotates the shaft 'a' in CCW as shown in the figure at a speed of 100 rpm. Entire gear set has a diametral pitch of 4 teeth/in and a pressure angle of 20°. The tooth numbers are: N2 = 48, N3 = 72, N4 = 48, and Ns = 120. 5 С a 3 a. Draw the free body diagram of the compound gear 3 and 4 mounted...
If using a two-stage planetary gear train, determine the output
torque of each shaft
In the proposed plan, an electromotor with a maximum power of 17kw at 1455 rpm is used to supply a gearbox with two output shafts connected to the mills. The motor is connected to the gearbox through a coupling system. Based on the required performance for the system, the first output shaft needs to transmit a power of at most 35% at 365 rpm to the...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. i) What is the ratio of output torque (Gear 4) to input torque (Gear 1)? j) Is it a coincidence that it is the same as the answer in 1 An input shaft drives Gear 1 with 20 teeth at 1800 rpm which mates with the 80-tooth Gear...
9.41 how can i know w3=wf ,w1=warm
why not w1=wf (same axis?)
please explain in detail.
9-41 Figure P9-8 (p. 534) shows an 600 rpm CW and gear D is fixed to ground. Find speed and direction of gears l and 3. epicyclic train with its tooth numbers. Gear 2 is driven at t9-42 Figure P9-9 (p. 535) shows a compound epicyclic train Shaft 1 is driven at 300 mm 120 72 30 A 24 ARM SHAFT 3 2 dix...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. e) What is the transmitted force between Gears 1 and 2, in lbf? f) What is the torque of Gear 1, in in-lbf? g) What is the torque of Gear 2? h) The torque of Gear 2 and 3 are the same. What is the torque of Gear...
please solve and show work
HH 2. Given a compound gear box in figure 1, where; a. Gear A = 40 Teeth, input rpm is 1250 rpm. b. Gear B = 160 Teeth, C. Gear C = 30 Teeth d. Gear D = 90 Teeth. Input Torque is 50 N.m., Efficiency is 75% Find the output speed, direction relative to input, power, & Holding Torque. HI B D
please help me how to solve
02. Motor is delivering 15 kw at 3000 rpm Shafts: d.-2.cm, L,-75 cm; d#3.0 cm, L2. 125 cm G 80 GPa Gear B: 25 teeth, Gear C: 50 teeth. a) Determine torques in each of the shafts. b) Determine the angle of twist of gear B at full load relative to the state of idle operation i.e. when To o c) Do the same for the gear D. Assume that gears ransmit motion without...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...
Desgin
0.2) Figure Q.2 shows a drive system in which a 20-hp electric motor drives separate output shafts. Gear A is mounted on the motor shafit that has a rotational spoed or 1750 rpm clockwise. Gear A drives gear train consisting of…B,C,and D thr deliver power through the shafts on which they are mounted. All gears have a diametral pitch of Pa-8.The following data are given Power delivered by gears B, C, and D: Pa Numbers of teeth for all...