Calculate the required reservoir pressure for the well to provide 500 STB/D of flowrate. flowing ...
PROBLEM No. 4: A 2-mile wide reservoir consists of several layers as shown below. An incompressible liquid with 1.5 cp viscosity flows through the reservoir at steady-state. Compute the flowrate (bbl/day) of the liquid through the layers P- 750 psia h- 50 ft h-30 f k-120 md P-2300 psia 140 md 200 md k-70 md h- 10 ft L-2.4 miles L-3.6 miles PROBLEM No. 5: A 3000-ft diameter unit in a reservoir has a permeability of 320 md, and is...
Calculate the flow rate in a reservoir 2,000 ft long, having a permeability of 70 md. The reservoir is 500 ft wide, and 15 feet of net pay thickness. The oil in the reservoir has a viscosity' of 3 cp. The pressure at the right end is 1500 psia, and the pressure at the left end is 3200 psia. Calculate the flow rate?
4. A radial flow system has an outer boundary of radius 330 ft, and a well of diameter 7 inches. The pressure at the outer boundary is 3000 psia, and the well pressure is550 psia. If the flow system has a permeability of 200 mD and thickness of 35 ft, and if the flowing fluid viscosity is 7 cp, calculate the production rate in B/D.
ABET CRITERION (E, K) 7-14 A single-phase fluid reservoir is described by three equal gridblocks as shown in Fig. 7-16. The reservoir is horizontal and has homogeneous and isotropic rock properties, k-270 md and 0.27. Gridblock dimensions are Δ-400 ft, 4y-650 ft, and h = 60 ft. Reservoir fluid properties are B = 1 RBSTB and μ = 1 cp. The reservoir left w boundary is kept constant at 3000 psia, and the reservoir right boundary is kept at a...
Exercise 3 An oil well in the X Field is producing at a stabilized rate of 600 STB/day at a stabilized bottom-hole flowing pressure of 1800 psi. Analysis of the pressure buildup test data indicates that the pay zone is characterized by a permeability of 120 md and a uniform thickness of 25 ft. The well drains an area of approximately 40 acres. The following additional data is available: r.= 0.25 ft B. = 1.25 bbl/STB A = 40 acres...
2. For the 1D reservoir described in the figure below, the reservoir left boundary is kept at a constant pressure gradient of -0.1 psi/ft (note the negative sign) and the reservoir right boundary is supplied with fluid at a rate of 50 STBD. There is a producing well in grid 4 with a rate of 150 STBD. Write the flow equations for grids 1,4, and 5. (20 points) OF 1- E Ins (only the flow equations, NO solving). Given: Tim...