Does Direct Cache Access (DCA) ever access Level 1 (L1) cache? Why?
Question: Does Direct Cache Access (DCA) ever access Level 1 (L1) cache? Why?
Answer:
Direct Input Output (DIDO) is commonly called as term Direct Cache Access (DCA) this technique / mechanism is called to use Input/Output in an intensive big data work-loads. DCA is to extend the protocol between NIC and memory-controller.
Using Direct Cache Access Accessing Level 1 (L1) Cache. Acccesing level 1 (L1) Cache using DCA will have huge impact and major affects on other caches.
=========================================
Problems seen in accessing Level 1 Cache using DCA
***** Need to use Level 1 Cache effectively and efficiently, If not used effectively this will need to bottle-neck and performance impacts.
***** Level 1 Cache Access will affect other Cache performance and slowing down the functionality of other caches
***** Space (Memory-Related) problems will encounter in using level 1 cache
***** Program which access Level 1 Cache should be very constraint and hold less memory consumption.
=========================================
Above are the issues in accessing L1 Cache from DCA.
But in the developed technology many programmers have given optimization solutions to use the Level 1 cache effectively and efficiently by using DCA.
Question 4 - [25 Points] Part (a) - Average Access Time (AMAT) The average memory access time for a microprocessor with One (1) level (L1) of cache is 2.4 clock cycles - If data is present and valid in the cache, it can be found in 1 clock cycle If data is not found in the cache, 80 clock cycles are needed to get it from off- chip memory Designers are trying to improve the average memory access time to...
A new smartphone just out on the market has a L1 cache with an access time of 1 cycle, an L2 cache with an access time of 5 cycles and DRAM with access time of 30 cycles. The latest benchmarks indicate that for most applications the L1 hit rate is 80% and L2 hit rate is 95%. Compute the Average Memory Access Time for the memory hierarchy in this device. (More interested in the explanation of how to get the...
Consider an L1 cache that has 8 sets, is direct-mapped (1-way), and supports a block size of 64 bytes. For the following memory access pattern (shown as byte addresses), show which accesses are hits and misses. For each hit, indicate the set that yields the hit. (30 points) 0, 48, 84, 32, 96, 360, 560, 48, 84, 600, 84, 48.
Base machine has a 2.4GHz clock rate. There is L1 and L2 cache. L1 cache is 256K, direct mapped write through. 90% (read) hit rate without penalty, miss penalty is 4 cycles. (cost of reading L2) All writes take 1 cycle. L2 cache is 2MB, 4 way set associative write back. 95% hit rate, 60 cycle miss penalty (cost of reading memory). 30% of all instructions are reads, 10% writes. All instructions take 1 cycle - except reads which take...
a) Calculate the AMAT for a cache system with one level of cache between the CPU and Main Memory. Assume that the cache has a hit time of 1 cycle and a miss rate of 11%. Assume that the main memory requires 300 cycles to access (this is the hit time) and that all instructions and data can be found in the main memory (there are no misses). b) Let us modify the cache system from part (a) and add...
Compare two designs of a computing system. (i) 1KB L1 cache with misss-rate of 11% and hit-time of 0.62ns. (ii) 2KB L1 cache with miss-rate of 8% and hit-time of 0.66ns . For both the main memory access takes 80ns. (a) Assuming that the L1 hit-time determines the processor cycle time, what are the clock frequencies of the two designs? (b) Calculate the Average Memory Access Time (AMAT) for the two designs
Assume the access time for an L2 cache with a 64 byte cache block is 20 cycles for the 1st 64 bit (8 byte) word, and an additional 2 cycles for each subsequent word. What is access time (time before L1 can pass incoming data on to processor) for a read of a word at 5ed705 if the full block must be read before using data? With critical word first? With early restart?
1. What makes SRAM access time less DRAM? 2. What principles that make the cache improve the performance of the computer? 3. Why the DRAM needs frequent charging? 4. What are the principles that make associative mapping (cache to memory) better than direct mapping? 5. What is the difference between direct and random access (to memory)? 6. Why do we need nonvolatile storage devices? 7. In general, what are the strategies for exploiting spatial locality and temporal locality? 8. A...
In a memory hierarchy organization with three levels of caches and main memory assume that: Cache Level L1 has access time tc1 = 5ns and hit ratio h1 = 90%, Cache 2 Level L2 has access time tc2 = 15 ns and hit ratio h2 = 80% Cache Level 3 has access time tc3 = 45 and hit ratio h3 = 60% Main memory access time tm = 100 ns. Find average memory access time. You are required to show...
For a direct-mapped cache design with a 32-bit address, the following bits of the address are used to access the cache. Tag Index Offset 31-10 9-4 3-0 How many entries does the cache have?