Propane enters an insulated combustion chamber at 25°C, 1 atm
Propane enters an insulated combustion chamber at 25°C, 1 atm. and burns with 120% theoretical air also at 25°C, 1 atm. What is the exhaust gas temperature for this reaction?
Homework Answers
Liquid propane (C_3H_8) enters a steady-flow combustion chamber at 25 Degree C, and 6 atm at...
Liquid propane (C_3H_8) enters a steady-flow combustion chamber at 25 Degree C, and 6 atm at a rate of 0.8 kg/min. It is burned with 150 percent excess air that is compressed and preheated to 400 K and 6 atm before entering the combustion chamber. The products of the combustion enter a gas turbine at 1200 K and 6 tam and leave at 700 K and 1 atm. The adiabatic efficiency of the turbine is 80%. The combustion process is...
1.f) Methane gas (CH4) enters a combustion chamber at a rate of 3 kg/sec at a...
1.f) Methane gas (CH4) enters a combustion chamber at a rate of 3 kg/sec at a temperature of 25 °C. A 200% theoretical air is supplied at a temperature of 400K. At the middle of methane combustion process (i.e., after 50% of methane gas is burnt), liquid propane (C3H8) at 25°C is injected at a rate that produces neither CO nor O2 in the flue gases. Assume steady state and adiabatic process at 1 atm, calculate the following i. The...
Problem 15.10: Liquid octane (CsHis) enters a steady-flow combustion chamber at 25°C and 1 atm at...
Problem 15.10: Liquid octane (CsHis) enters a steady-flow combustion chamber at 25°C and 1 atm at a rate of 0.35 kg/min. It is burned with 50 percent excess air that also enters at 25°C and 1 atm. After combustion, the products are allowed to cool to 25°C. Assuming complete combustion and that all the H2O in the products is in liquid form, determine (a) the heat transfer rate from the combustion chamber, (b) the entropy generation rate, and (c) the...
Gasoline enters a combustion chamber, at 1 atm, 298 K and a rate of 0.08 kg/min, where it burns s...
Gasoline enters a combustion chamber, at 1 atm, 298 K and a rate of 0.08 kg/min, where it burns steadily and completely, with 70% excess air that enters the chamber at 1 atm, 200 K. The exit temperature of the combustion products is 800 K. Use the IG mixture model for gases. Represent gasoline with liquid octane. a. Determine the mass flow rate, [kg of air/min], of air. b. Determine the rate of heat transfer, . c. What is the...
Methane (CH4) is burned with 110.9 % of theoretical air. The mixture enters the combustion chamber...
Methane (CH4) is burned with 110.9 % of theoretical air. The mixture enters the combustion chamber at 25°C. 1) Find the Air/Fuel ratio for this mixture: AF = (+ 0.03) 2) Find the adiabatic flame temperature for the mixture. Tadiabitic flame = OC (+ 20°C) 3) Find the mole fraction of the N2 in the exhaust. YN2 =
Formul Question 2 (50 points): Propane gas and burns with 20% excess air entering (molar C, Hs) at 25 C.I atm enters a reactor operating at steady state at 25 C l atm of the carbon entering with...
Formul Question 2 (50 points): Propane gas and burns with 20% excess air entering (molar C, Hs) at 25 C.I atm enters a reactor operating at steady state at 25 C l atm of the carbon entering with the fuel, 94% s) appears in the products at CO2 and the rest as CO. Heat transfer from the reactor occurs te of 1.4 x 10° kJ per kmol or propane. Use your ideal gas tables to answer this question. ite the...
4. Propylene (C,H) enters a combustion chamber at 25 C, 1 bar, with a volumetric flow...
4. Propylene (C,H) enters a combustion chamber at 25 C, 1 bar, with a volumetric flow rate of 10m3/min. 150% oftheoretical air enters the chamber at 47°C, 1 bar. Combustion products exit the chamber at 327C, 1 bar. For this system find: a. the air-fuel ratio on a mass basis b. the rate of heat transfer from the chamber, kJ/min c. the dew point of the combustion products,C
Uliue bud with thecretical air at 25 °c and 1 atm 7 Liqudodane fuel at 77 the chamber at 1200 F. ...
Uliue bud with thecretical air at 25 °c and 1 atm 7 Liqudodane fuel at 77 the chamber at 1200 F. ls mixed in a combustion chamber with 400% theoretical air at 300-F Calculate the heat loss per mole of fuel The products
Uliue bud with thecretical air at 25 °c and 1 atm 7 Liqudodane fuel at 77 the chamber at 1200 F. ls mixed in a combustion chamber with 400% theoretical air at 300-F Calculate the heat loss...
Octane gas at 25 C and 118 kPa enters a combustion chamber at a rate of...
Octane gas at 25 C and 118 kPa enters a combustion chamber at a rate of 0.09 m /min. The fuel is burned completely with 10 kg/min of dry air which enters the chamber at 22oC and 118 kPa. After combustion, the products are allowed to cool to 37oC and 118 kPa. The heat released by the combustion process is absorbed by another system which is at 460 K. If the surroundings are at 25oC, determine: (a) The heat transfer...
Benzene gas (C6H6) at 25℃
Benzene gas (C6H6) at 25℃ .1 atm enters a combustion chamber and burns operating at steady-state and burns with 110% theoretical air enters at 25℃, The counustion products exit at 1000 K and include only CO₃, CO, H₂ O and aN2. and The Nitrogen is inert(a) Write the balanced chemical equation of the complete combustion of Benzene with the theoretical amount of air. (4. points)(b) Write the balanced chemical equation of the combustion of Benzene with those, theoretical amount of...
Liquid propane (C_3H_8) enters a steady-flow combustion chamber at 25 Degree C, and 6 atm at a rate of 0.8 kg/min. It is burned with 150 percent excess air that is compressed and preheated to 400 K and 6 atm before entering the combustion chamber. The products of the combustion enter a gas turbine at 1200 K and 6 tam and leave at 700 K and 1 atm. The adiabatic efficiency of the turbine is 80%. The combustion process is...
1.f) Methane gas (CH4) enters a combustion chamber at a rate of 3 kg/sec at a temperature of 25 °C. A 200% theoretical air is supplied at a temperature of 400K. At the middle of methane combustion process (i.e., after 50% of methane gas is burnt), liquid propane (C3H8) at 25°C is injected at a rate that produces neither CO nor O2 in the flue gases. Assume steady state and adiabatic process at 1 atm, calculate the following i. The...
Problem 15.10: Liquid octane (CsHis) enters a steady-flow combustion chamber at 25°C and 1 atm at a rate of 0.35 kg/min. It is burned with 50 percent excess air that also enters at 25°C and 1 atm. After combustion, the products are allowed to cool to 25°C. Assuming complete combustion and that all the H2O in the products is in liquid form, determine (a) the heat transfer rate from the combustion chamber, (b) the entropy generation rate, and (c) the...
Methane (CH4) is burned with 110.9 % of theoretical air. The mixture enters the combustion chamber at 25°C. 1) Find the Air/Fuel ratio for this mixture: AF = (+ 0.03) 2) Find the adiabatic flame temperature for the mixture. Tadiabitic flame = OC (+ 20°C) 3) Find the mole fraction of the N2 in the exhaust. YN2 =
Formul Question 2 (50 points): Propane gas and burns with 20% excess air entering (molar C, Hs) at 25 C.I atm enters a reactor operating at steady state at 25 C l atm of the carbon entering with the fuel, 94% s) appears in the products at CO2 and the rest as CO. Heat transfer from the reactor occurs te of 1.4 x 10° kJ per kmol or propane. Use your ideal gas tables to answer this question. ite the...
4. Propylene (C,H) enters a combustion chamber at 25 C, 1 bar, with a volumetric flow rate of 10m3/min. 150% oftheoretical air enters the chamber at 47°C, 1 bar. Combustion products exit the chamber at 327C, 1 bar. For this system find: a. the air-fuel ratio on a mass basis b. the rate of heat transfer from the chamber, kJ/min c. the dew point of the combustion products,C
Uliue bud with thecretical air at 25 °c and 1 atm 7 Liqudodane fuel at 77 the chamber at 1200 F. ls mixed in a combustion chamber with 400% theoretical air at 300-F Calculate the heat loss per mole of fuel The products
Uliue bud with thecretical air at 25 °c and 1 atm 7 Liqudodane fuel at 77 the chamber at 1200 F. ls mixed in a combustion chamber with 400% theoretical air at 300-F Calculate the heat loss...
Most questions answered within 3 hours.
-
The denaturation of proteins can be described by the
equilibrium
F⇌U
where F and U represent...
asked 53 minutes ago -
Please answer what the maximum and minimum force is, and the
angle on the ion is...
asked 55 minutes ago -
implement a program that reads a number of rows and a symbol.
The program will draw...
asked 1 hour ago -
Assume that when adults with smartphones are randomly selected,
45% use them in meetings or classes....
asked 1 hour ago -
Determine the number of formula units of
Na2SO4 and moles of oxygen contained in 8.11
moles...
asked 1 hour ago -
Explain in steps on the following code
What would be the output when executed
using System;...
asked 1 hour ago -
Given the information in the table, which of the following
statements is CORRECT?
Stock A
Stock...
asked 1 hour ago -
Write MARIE assembly language programs that do the following:
Write a program that inputs an integer...
asked 1 hour ago -
Explain an understanding of services and protocols.
Explain the job of DNS.
Explain the three email...
asked 1 hour ago -
(As soon as possible) Balance each of the following equations
according to the half-reaction method:
H2O2(aq)...
asked 2 hours ago -
A thin rod with a mass of 3.5kg and a length L=1.5 m is oriented
horizontally....
asked 1 hour ago -
Inheritance pattern in BRCA 1
Describe the inheritance pattern of BRCA 1 Is it recessive or...
asked 1 hour ago