Problem 15.10: Liquid octane (CsHis) enters a steady-flow combustion chamber at 25°C and 1 atm at...
Liquid propane (C_3H_8) enters a steady-flow combustion chamber at 25 Degree C, and 6 atm at a rate of 0.8 kg/min. It is burned with 150 percent excess air that is compressed and preheated to 400 K and 6 atm before entering the combustion chamber. The products of the combustion enter a gas turbine at 1200 K and 6 tam and leave at 700 K and 1 atm. The adiabatic efficiency of the turbine is 80%. The combustion process is...
Octane gas at 25 C and 118 kPa enters a combustion chamber at a rate of 0.09 m /min. The fuel is burned completely with 10 kg/min of dry air which enters the chamber at 22oC and 118 kPa. After combustion, the products are allowed to cool to 37oC and 118 kPa. The heat released by the combustion process is absorbed by another system which is at 460 K. If the surroundings are at 25oC, determine: (a) The heat transfer...
Gasoline enters a combustion chamber, at 1 atm, 298 K and a rate of 0.08 kg/min, where it burns steadily and completely, with 70% excess air that enters the chamber at 1 atm, 200 K. The exit temperature of the combustion products is 800 K. Use the IG mixture model for gases. Represent gasoline with liquid octane. a. Determine the mass flow rate, [kg of air/min], of air. b. Determine the rate of heat transfer, . c. What is the...
4. Propylene (C,H) enters a combustion chamber at 25 C, 1 bar, with a volumetric flow rate of 10m3/min. 150% oftheoretical air enters the chamber at 47°C, 1 bar. Combustion products exit the chamber at 327C, 1 bar. For this system find: a. the air-fuel ratio on a mass basis b. the rate of heat transfer from the chamber, kJ/min c. the dew point of the combustion products,C
Question 4 Benzene gas (C&H6) at 25 deg C is burned during a steady flow combustion process with 95% theoretical air that enters the combustion chamber at 25 deg C. All the hydrogen in the fuel bums to H20, the carbon bums to CO and CO. f the products leave at 1000 K, determine a the mole fraction of the CO in the products [101 the heat transfer from the combustion chamber per kmol of fuel (15] b. (0.021cr
Propane enters an insulated combustion chamber at 25°C, 1 atm. and burns with 120% theoretical air also at 25°C, 1 atm. What is the exhaust gas temperature for this reaction?
Methane gas is burned with 30 percent excess air. This fuel enters a steady-flow combustor at 0.9 atm and 25'C and is mixed with the air. The products of combustion leave this reactor at 0.9 atm and 1600 K. Determine the equilibrium composition of the products of combustion and the amount of heat released by this combustion in kJ/kmol methane. Use data from the tables. CH4 Combustion 25℃ CO, HO 1600 K 30%acess 25 C The amount of carbon dioxide...
2. (35P) Gasoline fuel (CH) at 25°C is burned in a steady flow combustion chamber with air that also enters at 25°C. The required mass flow rate of the diesel fuel is 49.5 g/s. Calculate; a) Using conservation of atoms, find number of moles and a, b) stoichiometric AF (A/F) c) Air flow rate (g/s), c) calculate the exit temperature of the product gases for stoichiometric combustion.. CH, 29K (h - h.) kJ/kmole Mkg/kmol C, kJ/kmole T-298 K kJ/kmole -267120...
Problem 5 0/2 points (0%) Diesel fuel (C12H26) at 25 0C is burned in a steady-flow combustion chamber with 30 % excess air that also enters at 25°C. The products leave the combustion chamber at 380 K. Assuming combustion is complete, Determine the required mass flow rate of the diesel fuel to supply heat at a rate of 1600 kJ/s. X 69.18758 KJs. g/s
3. (35 P) Diesel fuel (C,H,) at 25°C is burned in a steady flow combustion chamber with 40 percent excess air air that also enters at 25°C. The required mass flow rate of the diesel fuel is 49.5 g/s. a) Using conservation of atoms, find number of moles and a , b) Actual AF (A/F) c) Actual Air flow rate (g/s), d) Calculate the exit temperature of the product gases. (h - h.) kJ/kmole Mkg/kmolc, T=298 K kJ/kmole CH, 0...