Homework Answers
problem 2)
Add Answer to:
please write in clear handwriting with good explanation for a good rating . Also note that the second question is delta connected. Solve both picture all question For this gemator anwwer the foll...
A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the fo...
Please solve this question. Thank you.
A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
A 3-phase, 460 V, 1740 rpm, 60 Hz, 4-pole wound-rotor induction motor has the following parameters...
A 3-phase, 460 V, 1740 rpm, 60 Hz, 4-pole wound-rotor induction motor has the following parameters per phase: R1 = 0.25 Ω, ' 2R = 0.2Ω, ' 1 2 X = X = 0.5Ω, 30 m X = Ω. The rotational losses are 1700 W. With the rotor terminals short-circuited, find: 1. at starting: • current when started direct on full voltage, • a torque 2. at full load: • slip • current • ratio of starting current to full-load...
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω,...
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω, R2=0.23 Ω, X1=0.48 Ω, X2=0.29 Ω, Xm=29.71 Ω where: R1 is the stator resistance R2 is the rotor resistance reflected in the stator; X1 is the stator leakage inductance; X2 is the rotor leakage inductance reflected in the stator; Xm is the magnetising inductance; The rotational losses are 2450 W. The motor drives a mechanical load at a speed of...
2. A 208V, two pole, 60 Hz, y connected wound rotor induction motor is rated at...
2. A 208V, two pole, 60 Hz, y connected wound rotor induction motor is rated at 15hp. Its equivalent circuit parameters are R:-0.200, R:-0.120, X.-X-0.410, X-150. The rotational losses are 430W. The motor drives a mechanical load with a slip of 5 percent. By using simplified equivalent circuit calculate; (30 pts) a) The motor speed in revolutions per minute and radians per second. b) The line current c) The stator copper losses. d) The air gap power. e) The power...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
Problem 2 (10 points): A 3-phase, 208-V (H), six-pole Y-connected, 25-hp, design class B (X,-15%)...
Problem 2 (10 points): A 3-phase, 208-V (H), six-pole Y-connected, 25-hp, design class B (X,-15%) induction motor is tested in the laboratory, with the following results: DC test: 13.5 V, 64 A No load: 208 V, 24.0 A, 1400 W, 60 Hz Locked rotor: 24.6 V, 64.5 A, 2200 W, 15 Hz Neglecting the core losses (a) Find the equivalent circuit parameters of this motor and show them on the equivalent circuit. (b) What is the rotational losses of this...
how do we calculate ii and iii) - induction motor (25 marks) QUESTION 3 A three-phase,...
how do we calculate ii and iii) - induction motor
(25 marks) QUESTION 3 A three-phase, 400 V, 50 Hz, 4-pole, 1370 rpm, star connected, squirrei-cage induction motor has the following parameters: R, 20, R2- 3 Q, X1-X2- 3.5 and Xm=40 .Motor is controlled by a voltage source inverter at constant V/f ratio. By using IEEE equivalent circuit; Calculate the starting torque and starting current at 10 Hz To- If the torque-speed to be a straight line calculate the slip...
5. A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp. Its equivalent...
5. A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp. Its equivalent circuit components are R=0.100 Ry=0.070. X - 10.00 R = 250 X; -0.2100 X=0.21002 Praw=500 W P =0.5% of input at full load For a slip of 0.05, find (a) The line current (b) The induced voltage in the rotor (c) The stator power factor (d) The rotor power factor (e) The rotor frequency (f) The stator copper losses (g) The core loss (h)...
Q10. A three phase, 100-hp, 2400V, 6-pole, 50 Hz induction motor is tested, with the following...
Q10. A three phase, 100-hp, 2400V, 6-pole, 50 Hz induction motor is tested, with the following test results obtained: No-load test (at 50 Hz) Block-rotor test (at 12.5 Hz) 420 35 11500 Signal Voltage (V) 2400 Current (A) 10 Power (W) 4200 Stator resistance is measured at 1.75 Ω per phase. a) Find the parameters of the equivalent circuit b) At a slip of 0.25, calculate the power and torque output and the efficiency of this motor. Ans. : a)...
4.6. A 460-V, 75 kW, 4-pole, delta-connected, 60-Hz, three- phase induction motor has a full-load slip of 5 percent, an efficiency of 92 percent and a power-factor of 0.87 lagging at full-load. At st...
4.6. A 460-V, 75 kW, 4-pole, delta-connected, 60-Hz, three- phase induction motor has a full-load slip of 5 percent, an efficiency of 92 percent and a power-factor of 0.87 lagging at full-load. At start-up, the motor develops 1.9 times the full load developed torque but draws 7.5 times the rated current at the rated voltage. This motor is to be started with an auto- transformer reduced-voltage starter. Assume the stator resistance and the stator core loss to be negligible. Calculate...
Please solve this question. Thank you.
A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
2. A 208V, two pole, 60 Hz, y connected wound rotor induction motor is rated at 15hp. Its equivalent circuit parameters are R:-0.200, R:-0.120, X.-X-0.410, X-150. The rotational losses are 430W. The motor drives a mechanical load with a slip of 5 percent. By using simplified equivalent circuit calculate; (30 pts) a) The motor speed in revolutions per minute and radians per second. b) The line current c) The stator copper losses. d) The air gap power. e) The power...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
Problem 2 (10 points): A 3-phase, 208-V (H), six-pole Y-connected, 25-hp, design class B (X,-15%) induction motor is tested in the laboratory, with the following results: DC test: 13.5 V, 64 A No load: 208 V, 24.0 A, 1400 W, 60 Hz Locked rotor: 24.6 V, 64.5 A, 2200 W, 15 Hz Neglecting the core losses (a) Find the equivalent circuit parameters of this motor and show them on the equivalent circuit. (b) What is the rotational losses of this...
how do we calculate ii and iii) - induction motor
(25 marks) QUESTION 3 A three-phase, 400 V, 50 Hz, 4-pole, 1370 rpm, star connected, squirrei-cage induction motor has the following parameters: R, 20, R2- 3 Q, X1-X2- 3.5 and Xm=40 .Motor is controlled by a voltage source inverter at constant V/f ratio. By using IEEE equivalent circuit; Calculate the starting torque and starting current at 10 Hz To- If the torque-speed to be a straight line calculate the slip...
5. A 208-V four-pole 60-Hz Y-connected wound-rotor induction motor is rated at 30 hp. Its equivalent circuit components are R=0.100 Ry=0.070. X - 10.00 R = 250 X; -0.2100 X=0.21002 Praw=500 W P =0.5% of input at full load For a slip of 0.05, find (a) The line current (b) The induced voltage in the rotor (c) The stator power factor (d) The rotor power factor (e) The rotor frequency (f) The stator copper losses (g) The core loss (h)...
Q10. A three phase, 100-hp, 2400V, 6-pole, 50 Hz induction motor is tested, with the following test results obtained: No-load test (at 50 Hz) Block-rotor test (at 12.5 Hz) 420 35 11500 Signal Voltage (V) 2400 Current (A) 10 Power (W) 4200 Stator resistance is measured at 1.75 Ω per phase. a) Find the parameters of the equivalent circuit b) At a slip of 0.25, calculate the power and torque output and the efficiency of this motor. Ans. : a)...
4.6. A 460-V, 75 kW, 4-pole, delta-connected, 60-Hz, three- phase induction motor has a full-load slip of 5 percent, an efficiency of 92 percent and a power-factor of 0.87 lagging at full-load. At start-up, the motor develops 1.9 times the full load developed torque but draws 7.5 times the rated current at the rated voltage. This motor is to be started with an auto- transformer reduced-voltage starter. Assume the stator resistance and the stator core loss to be negligible. Calculate...
Most questions answered within 3 hours.
-
1. In a labor market, marginal cost for a firm is
____________.
a. recruiting cost
b....
asked 5 minutes ago -
On January 1, 2019, ABC Company issued $60,000,000 of 20-year,
10.5% bonds when the market rate...
asked 29 minutes ago -
39.4% of US homes continue to use a landline in addition to cell
phone service. 3...
asked 1 hour ago -
Starting with benzene, synthesize 1-phenyl-1-butyne.
Show intermediates and reagents.
asked 2 hours ago -
Create a 32-run crossed array design with six control factors
and two noise factors such that...
asked 2 hours ago -
A 500g sample of sand from source A has the following amounts
retained on each sieve....
asked 2 hours ago -
In
your own words, please explain the essay by John Keynes wrote "The
End of Laissez...
asked 2 hours ago -
How are the matrix and pixels related? Why are smaller
pixels better for diagnostic quality?
asked 2 hours ago -
2. An AC generator has 80 rectangular loops on
its armature. Each loop is 11 cm...
asked 3 hours ago -
Please help me with this question. Consider Aldi’s current and
potential geographic markets (see Exhibit 4...
asked 3 hours ago -
What are the main components of the fermentation process and
give an explanation of each? Include...
asked 3 hours ago -
Explain which types of cells in the body (belonging to which
organs, etc.) are sensitive to...
asked 3 hours ago