b) A nozzle is supplied with steam at 0.7 MPa and 275-c. Determine temperature and velocity at throat considering no losses. If diverging portion of nozzle is 6 cm long。 and throat diameter of 0....
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
QUESTION 6 A long 6-cm-diameter steam pipe whose external surface temperature is 90°C passes through some open area that is not protected against the winds. Determine the rate of heat loss from the pipe per unit of its length when the air is at 1 atm pressure and 7"C and the wind is blowing across the pipe at a velocity of 30 km/h. Use k 0.02724 W/m.°C; v- 1.78 x 10 m-/s; Pr 0.7232. Calculate Reynolds Number O 100896.9 O...
Air enters a 23-cm-diameter 13-m-long underwater duct at 53°C and 1 atm at a mean velocity of 7 m/s, and is cooled by the water outside. If the average heat transfer coefficient is 85 W/m2 °C and the tube temperature is nearly equal to the water temperature of 5°C, determine the exit temperature of air and the rate of heat transfer. Use Table A-15 for the properties of air at the anticipated average temperature of 30°C. Answer in Watts. please...
DON’T disregard the thermal conductivity of the pipe 3.) Oil at 200 C flows in a pipeline. The pipe has a 30-cm diameter and the flow is at an average velocity of 2 m/s. A 200-m-long section of the pipeline passes through icy waters of a lake at 0° C. The pipe is uncoated carbon steel with a thermal conductivity of 61 W/m o C. Determine (a) the temperature of the oil when the pipe leaves the lake, (b) the...