761 Steam enters a turbine operating at steady state at 4 MPa, 500 C with a...
How do i solve C??? Please details Steam enters a two stage steady state turbine at 8 MPa and 500 C. It expands in the first stage to a state of 2 MPa and 350°C. Steam is then reheated at constant pressure to a temperature of 500°C before it enters the second stage, where it exits at 30 kPa and a quality of 98%. The net power output of the turbine is 3 MW Assume the surroundings to be at...
Steam enters a turbine operating at steady state at 30 bar, 400 °C with a mass flow rate of 126 kg/min and exits as saturated vapor at 0.2 bar, producing power at a rate of 1.5 MW. Kinetic and potential energy effects can be ignored. Determine the followings. (a) (5 points) The rate of heat transfer, in kW. (b) (15 points) The rate of entropy production, in kW/K, for an enlarged control volume that includes the turbine and enough of...
3. 50 points) Steam enters a turbine operating at a steady state at 12 MPa and 700 C. The mass flow rate of the steam is 200 kg'min. The steam exits the turbine as a saturated vapor at 3 bar. The turbine produces 3.0 MW of power. Ignore potential and kinetic energy effects. Assuming heat transfer from the turbine to the surroundings occurs at 20 C, determine: (a) (20 pts) The rate of heat transfer, in kW (b) (20 pts)...
thermo question 2. (20 points) Steam enters a turbine operating at steady state at 2 MPa, 360°C with a velocity of 100 m/s. Saturated vapor exits at 0.1 MPa and a velocity of 50 m/s. The elevation of the inlet is 3 m higher than at the exit. The mass flow rate of the steam is 15 kg's, and the power developed is 7 MW. Let g -9.81 m/s Determine (a) the area at the inlet, in m, and (b)...
Consider a steam power plant operating on the simple ideal Rankine cycle. Steam enters the turbine at 5 MPa and 500°C and is condensed in the condenser at a pressure of 50 kPa. Heat is supplied to the steam in a furnace maintained at 800 K, and waste heat is rejected to the surroundings at 300 K. Show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the net work output, (b) the thermal efficiency...
Canvas Steam enters a turbine operating at steady state 2.2 MP-WC with a very 0.1 MPa and a velocity of 50 m/s. The elevation of the inletisierte e 15 kg/s, and the power developed is 7 mW.648 = 9.84m2. Deastice (a) the area at the inlet, in ? (3 points) (b) the enthalpy at the inlet, in kJ/kg (1.5 points) (c) the enthalpy at the outlet, in kJ/kg (1.5 points) (d) the rate of heat transfer between the turbine and...
Steam enters an adiabatic turbine steadily at 3 MPa and 450°C at a rate of 8 kg/s and exits at 0.2 MPa and 150*C. If the surrounding air is at 25°C and 100 kPa, determine: a. The specific flow exergy of steam at turbine entrance b. The specific flow exergy of steam at turbine exit c. The rate of flow exergy change in the process.
Steam enters a turbine operating at steady state at 2 MPa, 360 °C with a velocity of 52 m/s. Saturated vapor exits at 0.1 MPa and a velocity of 35 m/s. The elevation of the inlet is 1 m higher than at the exit. The mass flow rate of the steam is 21 kg/s, and the power developed is 5 MW. Let g = 9.81 m/s2. Determine the area at the inlet, in m2.
Problem 1: (10 pts) Steam enters an insulated turbine operating at steady state at a pressure of 2 MPa and a temperature of 400°C. A liquid-vapor water mixture exits the turbine with a quality of 0.9 and a pressure of 15 kPa. The power output of the turbine is 5 MW. (1) Identify the keywords and state their meaning (2 pts) (2) Determine the mass flow rate of steam required (8 pts)
Steam enters a counterflow heat exchanger operating at steady state at 0.07 MPa with a quality of 0.9 and exits at the same pressure as saturated liquid. The steam mass flow rate is 1.3 kg/min. A separate stream of air with a mass flow rate of 100 kg/min enters at 30oC and exits at 60oC. The ideal gas model with cp = 1.005 kJ/kg·K can be assumed for air. Kinetic and potential energy effects are negligible. Determine the temperature of...