Homework Answers
Add Answer to:
Steam enters an adiabatic turbine steadily at 3 MPa and 450°C at a rate of 8...
Steam with the mass flow rate of 0.75 kg/s enters an adiabatic turbine steadily at 19 MPa, 600°C and 150 m/s
Steam with the mass flow rate of 0.75 kg/s enters an adiabatic turbine steadily at 19 MPa, 600°C and 150 m/s, and leaves at 150 kPa and 350 m/s. The isentropic efficiency of the turbine is 85%. Neglect potential energy. (I) Determine the exit temperature of the steam, and its quality (if saturated mixture) (ii) Calculate the actual power output of the turbine, in kW (iii) Illustrate a T-s diagram with respect to saturation lines for the isentropic process by clearly indicating all pressure, temperature,...
Steam enters an adiabatic turbine steadily at 7 MPa, 500 °C, and 45 m/s
Steam enters an adiabatic turbine steadily at 7 MPa, 500 °C, and 45 m/s, and leaves at 100 kPa and 75 m/s. If the power output of the turbine is 5 MW and the isentropic efficiency is 77 percent, determine: A. the mass flow rate of steam through the turbine, B. the temperature at the turbine exit, and C. the rate of entropy generation during this process.
5-30 Air enters an adiabatic nozzle steadily at 300 kPa, 200°C, and 30 m/s and leaves...
5-30 Air enters an adiabatic nozzle steadily at 300 kPa, 200°C, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm². Determine (a) the mass flow rate through the nozzle, (b) the exit temperature of the air, and (c) the exit area of the nozzle. Answers: (a) 0.5304 kg/s, (b) 184.6°C, (c) 38.7 cm P = 300 kPa T, = 200°C Vi = 30 m/s A = 80 cm AIR...
Steam flows steadily through an adiabatic turbine
Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s, and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine a. (3) Change in kinetic energy (-23.4 kJ) b. (4) Power output (12.12 MW) c. (3) Turbine inlet area (0.012966 m2)
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
Question 2 Question 2 of 5 10 points Steam enters an adiabatic turbine at 10 MPa...
Question 2 Question 2 of 5 10 points Steam enters an adiabatic turbine at 10 MPa and 500"C and leaves at 10 kPa with a quality of 69 percent. The plant has power rating of 10 MW Neglecting the changes in the cand potent energies, determine the following enthalpy of steam at the entrance 3375.1 InkJ/kg enthalpy of steam at the exit 1842.4 InkJ/kg mass flow rate in kg's
Problem 3 Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are...
Problem 3 Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 10 MPa, 400 C, and 80 m/s, and the exit conditions are 10 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine (a) the change in kinetic energy, (b) the power output, and (c) the turbine inlet area. Pi = 10 MPa 7, = 400 °C V1 80 m/s No STEAM 3 12 kg/s ▼Sh...
761 Steam enters a turbine operating at steady state at 4 MPa, 500 C with a...
761 Steam enters a turbine operating at steady state at 4 MPa, 500 C with a mass flow rate of 50 kg/s Saturated vapor exits at 10 kPa and the corresponding power developed is 42 MW The effects of motion and gravity negligible. are (a) For a control volume enclosing the turbine, determine the rale of heat Iransfer, in MW, from the turbine to its surrmundings Asuming 50°C. determine the rate of exergy destruction, in MW (b) If the turbine...
Carbon dioxide enters an adiabatic nozzle steadily at 1 MPa and 500°C with a mass flow...
Carbon dioxide enters an adiabatic nozzle steadily at 1 MPa and 500°C with a mass flow rate of 6000 kg/h and leaves at 100 kPa and 450 m/s. The inlet area of the nozzle is 40 cm2 Determine (a) the inlet velocity and (b) the exit temperature.
In a reheat-cycle power plant, steam enters the high-pressure turbine at 5 MPa, 450°C, and expands...
In a reheat-cycle power plant, steam enters the high-pressure turbine at 5 MPa, 450°C, and expands to 0.5 MPa, after which it is reheated to 450°C. The steam is then expanded through the low-pressure turbine to 7.5 kPa. Liquid water (Vi 0.001 m/kg) leaves the condensor at 30°C, is pumped to 5 MPa, and returned to the steam generator. Each turbine is adiabatic, with an isentropic efficiency of 81.6 % and the pump efficiency is 848 %. If the total...
5-30 Air enters an adiabatic nozzle steadily at 300 kPa, 200°C, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm². Determine (a) the mass flow rate through the nozzle, (b) the exit temperature of the air, and (c) the exit area of the nozzle. Answers: (a) 0.5304 kg/s, (b) 184.6°C, (c) 38.7 cm P = 300 kPa T, = 200°C Vi = 30 m/s A = 80 cm AIR...
Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s, and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine a. (3) Change in kinetic energy (-23.4 kJ) b. (4) Power output (12.12 MW) c. (3) Turbine inlet area (0.012966 m2)
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
Question 2 Question 2 of 5 10 points Steam enters an adiabatic turbine at 10 MPa and 500"C and leaves at 10 kPa with a quality of 69 percent. The plant has power rating of 10 MW Neglecting the changes in the cand potent energies, determine the following enthalpy of steam at the entrance 3375.1 InkJ/kg enthalpy of steam at the exit 1842.4 InkJ/kg mass flow rate in kg's
Problem 3 Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 10 MPa, 400 C, and 80 m/s, and the exit conditions are 10 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine (a) the change in kinetic energy, (b) the power output, and (c) the turbine inlet area. Pi = 10 MPa 7, = 400 °C V1 80 m/s No STEAM 3 12 kg/s ▼Sh...
761 Steam enters a turbine operating at steady state at 4 MPa, 500 C with a mass flow rate of 50 kg/s Saturated vapor exits at 10 kPa and the corresponding power developed is 42 MW The effects of motion and gravity negligible. are (a) For a control volume enclosing the turbine, determine the rale of heat Iransfer, in MW, from the turbine to its surrmundings Asuming 50°C. determine the rate of exergy destruction, in MW (b) If the turbine...
In a reheat-cycle power plant, steam enters the high-pressure turbine at 5 MPa, 450°C, and expands to 0.5 MPa, after which it is reheated to 450°C. The steam is then expanded through the low-pressure turbine to 7.5 kPa. Liquid water (Vi 0.001 m/kg) leaves the condensor at 30°C, is pumped to 5 MPa, and returned to the steam generator. Each turbine is adiabatic, with an isentropic efficiency of 81.6 % and the pump efficiency is 848 %. If the total...
Most questions answered within 3 hours.
-
Write a c/c++ program to read a list of students from a file and
create a...
asked 3 minutes ago -
Identify two different methods for collecting data in
qualitative research. What are the benefits and challenges...
asked 3 minutes ago -
I am suppose to have my array before the main class but I am
getting the...
asked 5 minutes ago -
Your task is to design the page table for the 32bit Pentium
microprocessor. Answer the following...
asked 12 minutes ago -
The Paradise Shoes Company has estimated its weekly TVC function
from data collected over the past...
asked 10 minutes ago -
A researcher wishes to study the cumulative effects of several
combinations of HIV drugs. There are...
asked 10 minutes ago -
Although Epicurus advocates pursuing pleasure for the
good life, discuss a few reasons why he does...
asked 28 minutes ago -
Problem 1: Present entries to record the selected transactions
described below:
(a)
Issued $2,790,000 of 5-year,...
asked 34 minutes ago -
Using technology to support HR activities increases:
a.
the efficiency of the administrative HR functions.
b....
asked 35 minutes ago -
1. List the features used to classify leaf
types.
2. List some characteristics that are shared...
asked 40 minutes ago -
The three elements of Value Proposition, Key Customers, and
Capabilities operate within an environment. Which of...
asked 42 minutes ago -
Katelynn, a physician, earns $200,000 from her medical practice
in the current year. She receives $45,000...
asked 50 minutes ago