Homework Answers
1a) We know that the emf produced in the glass electrode system varies linearly in pH.
ie; (pH)u = (pH)s + ((E(cell)S - E(cell)u)/0.0591
=7.00 +(0.397V - 0.209V)/0.0591
=10.2
Add Answer to:
thank you in advance for the help
1. A pH glass electrode has a potential of...
A lithium ion-selective electrode gave the potentials given in the table below for the following standard...
A lithium ion-selective electrode gave the potentials given in the table below for the following standard solutions of LiCl and two samples of unknown concentration Solution ([Li+]/M) Potential vs. SCE, mV 0.100 M +1.0 0.050 M -30.0 0.010 M -60.0 0.001 M -138.0 Unknown 1 -48.5 Unknown 2 -75.3 Draw a calibration curve of the electrode potential versus log[Li+] and determine if the electrode is displaying nernstain behaviour. Use a linear least squares procedure to determine the concentration of the...
Potential (mV) [Br](M) 0.300 Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded in...
Potential (mV) [Br](M) 0.300 Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded in the table. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given. -21.2 0.0300 36.2 95.7 0.00300 0.000300...
Question 4 of 4 > Potential (my -21.9 Calibration data for a bromide ion-selective electrode (ISE) was collected...
Question 4 of 4 > Potential (my -21.9 Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded in the table. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given. [Br"](M) 0.300...
Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded below. The potential of...
Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded below. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given [Br] (M) Potential (mV) 0.300 0.0300 0.00300 96.4 0.000300 155.1 0.0000300 224.8...
(5) The following data represent the potentials of a fluoride ion-selective electrode vs SCE for several...
(5) The following data represent the potentials of a fluoride ion-selective electrode vs SCE for several solutions. All solutions are made up in a way to control their pH and ionic strength, and contain added EDTA. Prepare an excel plot of the measured potential vs pF based on this information and determine the concentration of fluoride in each unknown solution. 5 Solution (M) Potential (mv) 5.0 x 102 -22.4 .0 x 103 36.8 5.0 x 104 96.0 5.0 x 10-...
Calibration data for a bromide ion‑selective electrode (ISE) was collected and recorded in the table. The...
Calibration data for a bromide ion‑selective electrode (ISE) was collected and recorded in the table. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y‑intercept of such a plot of the calibration data given. Br-M Potential (mV 0.300 -21.6 0.0300 36.7 0.00300 96.5 0.000300...
(3) A student generated the following calibration curve by recording the potential readings when a fluoride...
(3) A student generated the following calibration curve by recording the potential readings when a fluoride ion selective electrode is dipped in a series of fluoride standards: y = 50.5 – 54.62log[F- ]. If a mouthwash solution gave a certain potential reading (e.g. 210 mV), what is the molar concentration of fluoride in the mouthwash solution?
(1) When calibrating a glass electrode, 0.025 M potassium dihydrogen phosphate/0.025 M disodium hydrogen phosphate buffer...
(1) When calibrating a glass electrode, 0.025 M potassium dihydrogen phosphate/0.025 M disodium hydrogen phosphate buffer (pH = 6.881) gave a reading of -18.3 mV at 20 °C and 0.050 M potassium hydrogen phthalate buffer (pH = 3.788) gave a reading of +146.3 mV. What is the pH of an unknown giving a reading of +50.0 mV? What is the slope of the calibration curve (mV/pH units) and what is the theoretical slope at 20 °C? Find the value of...
A sodium ion electrode was calibrated by measuring the cell potentials of several standard Na+ solutions....
A sodium ion electrode was calibrated by measuring the cell potentials of several standard Na+ solutions. The other electrode was the SCE. The calibration data are shown in the following table. Log[Na+] Ecell (mV) -1 -165.6 0 -110.0 1 -51.8 2 6.5 3 64.5 a. Plot a calibration curve for these data. b. Determine the slope and intercept for the regression line of this plot. Is the response of this sodium electrode Nernstian? Explain. c. A 10.00mL aliquot of table...
In a 3-electrode cell filled with a solution of dopamine, the potential of the working electrode...
In a 3-electrode cell filled with a solution of dopamine, the potential of the working electrode is scanned from +0.2 V to +0.7 V vs. a Ag/AgCl reference electrode. The current rises exponentially and then peaks at +0.48 V followed by a decay (gradual decrease) in current. What causes the decrease in current? The concentration of dopamine near the electrode decreases. All of the dopamine in the solution is consumed. A second reaction begins to interfere at such positive potentials....
Potential (mV) [Br](M) 0.300 Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded in the table. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given. -21.2 0.0300 36.2 95.7 0.00300 0.000300...
Question 4 of 4 > Potential (my -21.9 Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded in the table. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given. [Br"](M) 0.300...
Calibration data for a bromide ion-selective electrode (ISE) was collected and recorded below. The potential of the ISE was measured against a saturated calomel electrode (SCE). All solutions were buffered at a pH of 7.56. A linear calibration curve can be constructed from this data as a plot of potential (in mV) vs. pBr. Determine the slope and y-intercept of such a plot of the calibration data given [Br] (M) Potential (mV) 0.300 0.0300 0.00300 96.4 0.000300 155.1 0.0000300 224.8...
(5) The following data represent the potentials of a fluoride ion-selective electrode vs SCE for several solutions. All solutions are made up in a way to control their pH and ionic strength, and contain added EDTA. Prepare an excel plot of the measured potential vs pF based on this information and determine the concentration of fluoride in each unknown solution. 5 Solution (M) Potential (mv) 5.0 x 102 -22.4 .0 x 103 36.8 5.0 x 104 96.0 5.0 x 10-...
(1) When calibrating a glass electrode, 0.025 M potassium dihydrogen phosphate/0.025 M disodium hydrogen phosphate buffer (pH = 6.881) gave a reading of -18.3 mV at 20 °C and 0.050 M potassium hydrogen phthalate buffer (pH = 3.788) gave a reading of +146.3 mV. What is the pH of an unknown giving a reading of +50.0 mV? What is the slope of the calibration curve (mV/pH units) and what is the theoretical slope at 20 °C? Find the value of...
In a 3-electrode cell filled with a solution of dopamine, the potential of the working electrode is scanned from +0.2 V to +0.7 V vs. a Ag/AgCl reference electrode. The current rises exponentially and then peaks at +0.48 V followed by a decay (gradual decrease) in current. What causes the decrease in current? The concentration of dopamine near the electrode decreases. All of the dopamine in the solution is consumed. A second reaction begins to interfere at such positive potentials....
Most questions answered within 3 hours.
-
1-Write an algorithm to get two numbers from the user (as
inputs) and calculate the sum...
asked 2 hours ago -
Define white-collar crime. What is the difference between
offender and offense-based definitions of white-collar crime? What...
asked 3 hours ago -
Consider a reaction which is 1st order with respect to A and 1st
order with respect...
asked 3 hours ago -
c++
The length of the hypotenuse of a right-angled triangle is the
square root of the...
asked 3 hours ago -
When a metal rod is heated, not only its resistance but also its
length and cross‐sectional...
asked 3 hours ago -
write a c++ program that computes the L^1 - Norm of a given
vector (L^1 norm...
asked 3 hours ago -
A manufacturer of banana chips would like to know whether its
bag filling machine works correctly...
asked 3 hours ago -
Complete the chapter case, "Turnover Analysis".
Chapter Case
Turnover Analysis
You recently completed your company’s new...
asked 3 hours ago -
What is the pH of solutions having the following H3O+
concentrations? Identify each as acidic, basic,...
asked 4 hours ago -
How does over-voltage of the diode usually occur?
asked 4 hours ago -
If you step on a dirty nail, your doctor will recommend you
update your Tetanus vaccination....
asked 4 hours ago -
Suppose that decreases in the price of milk lead to decrease s
in the retail prices...
asked 4 hours ago