Homework Answers
Add Answer to:
ler SHVAC SV Ref Cycles lGalgillg Worked Examples Example 3.4 The evaporator and condenser temperatures of...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22 °C. There...
In a vapor-compression refrigeration cycle, ammonia exits the
evaporator as saturated vapor at -22 °C. There are
irreversibilities in the compressor. The refrigerant enters the
condenser at 16 bar and 160 °C, and saturated liquid exits at 16
bar. There is no significant heat transfer between the compressor
and its surroundings, and the refrigerant passes through the
evaporator with a negligible change in pressure.
Calculate the coefficient of performance, b, and the isentropic
compressor efficiency, defined as:
2s Condenser Expansion...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated spac...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated space at -100C. Would you recommended an evaporator pressure of 1.6 bar or 2 bar for this system? Why? -la An automotive Air conditioner using refrigerant R134a as the working fluid and operating on ideal vapor compression refrigerant cycle is to maintain a space at 24°C while operating its condenser at 1000 kPa. Determine the COP of the system when a temperature difference of 14°C is allowed...
Please help with HW 37 Qoutl condenser Condenser A standard 4-component vapor-compression cycle using R-134a is...
Please help with HW 37
Qoutl condenser Condenser A standard 4-component vapor-compression cycle using R-134a is shown in the figure to the right. The cycle is used as a refrigeration cycle to cool a refrigerator at 5 °C with a cooling capacity of 200 W, with a heat transfer to a kitchen at 20 °C. Assume that the pressure drops in the evaporator and condenser are negligible, and that the compressor and expansion valve are adiabatic. Take the boundary temperature...
In a simple vapor compression refrigeration cycle: - Ammonia exits the evaporator as saturated· vapor at...
In a simple vapor compression refrigeration cycle: - Ammonia exits the evaporator as saturated· vapor at -22°C (State 1 ) .. - Ammonia enters the condenser at 16 Bar and 160°C (State 2; h2 = 1798.45 kJ/kg) - Ammonia exits the condenser as saturated l1quid at 16 Bar (State 3; h3 = 376.46 kJ/kg) - The refrigeration capacity is 150 kW. Draw the system schematic and the T-s diagram and determine: i) the mass flow rate· of refrigerant, ii) the...
The coefficient of performance-of vapor-compression refrigeration cycles
a) The coefficient of performance-of vapor-compression refrigeration cycles improves when the refrigerant is subcooled before it enters the throttling valve Can the refrigerant be subcooled indefinitely to maximize this effect, or is there a lower limit? Explain brieflyb) A two-stage compression refrigeration system with a flash chamber is used to produce chilled water for a commercial building The refrigeration system operates between a pressure limits of 1 2 MPa and 200 kPa with refrigerant-134a as the working fluid. The refrigerant leaves...
A two-stage compression refrigeration system with an adiabatic liquid-vapor separation unit uses refrigerant-134a as working fluid....
A two-stage compression refrigeration system with an adiabatic liquid-vapor separation unit uses refrigerant-134a as working fluid. The system operates the evaporator at 0.4 MPa, the condenser at 1.6 MPa, and the separator at 0.8 MPa. The compressors use 25 kW of power. Given that the refrigerant is saturated liquid at the inlet of each expansion valve and saturated vapor at the inlet of each compressor, and the compressors are isentropic: (0) show the process on a T-s diagram; ) calculate...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant enters the condenser at 16 bar and 160°C, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 150 kW, determine: (a) the mass flow rate of the refrigerant, in kg/s. (b) the power input to the...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant enters the condenser at 16 bar and 190°C, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 50 kW, determine: (a) the mass flow rate of the refrigerant, in kg/s. (b) the power input to the...
A heat pump using refrigerant-134a as a refrigerant operates its condenser at 800 kPa and its...
A heat pump using refrigerant-134a as a refrigerant operates its condenser at 800 kPa and its evaporator at −1.25°C. It operates on the ideal vapor-compression refrigeration cycle. What is the COP of the heat pump for the case when the vapor entering the compressor is superheated by 2°C and for the case when the compressor has no irreversibilities? The COP of the heat pump when the compressor has no irreversibilities is____. The COP of the heat pump when the vapor...
Condenser Compressor An ideal vapor-compression refrigeration cycle is modified to include a counter-flow heat exchanger as...
Condenser Compressor An ideal vapor-compression refrigeration cycle is modified to include a counter-flow heat exchanger as shown. Refrigerant 134a leaves the evaporator as saturated vapor at 0.10 MPa and is heated at constant pressure to 20°C before entering the compressor. Following isentropic compression to 1.4 MPa, the refrigerant passes through the condenser and exits at 45°C and 1.4 MPa. The liquid then passes through the heat exchanger and enters the expansion valve at 1.4 MPa. The mass flow rate of...
In a vapor-compression refrigeration cycle, ammonia exits the
evaporator as saturated vapor at -22 °C. There are
irreversibilities in the compressor. The refrigerant enters the
condenser at 16 bar and 160 °C, and saturated liquid exits at 16
bar. There is no significant heat transfer between the compressor
and its surroundings, and the refrigerant passes through the
evaporator with a negligible change in pressure.
Calculate the coefficient of performance, b, and the isentropic
compressor efficiency, defined as:
2s Condenser Expansion...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated space at -100C. Would you recommended an evaporator pressure of 1.6 bar or 2 bar for this system? Why? -la An automotive Air conditioner using refrigerant R134a as the working fluid and operating on ideal vapor compression refrigerant cycle is to maintain a space at 24°C while operating its condenser at 1000 kPa. Determine the COP of the system when a temperature difference of 14°C is allowed...
Please help with HW 37
Qoutl condenser Condenser A standard 4-component vapor-compression cycle using R-134a is shown in the figure to the right. The cycle is used as a refrigeration cycle to cool a refrigerator at 5 °C with a cooling capacity of 200 W, with a heat transfer to a kitchen at 20 °C. Assume that the pressure drops in the evaporator and condenser are negligible, and that the compressor and expansion valve are adiabatic. Take the boundary temperature...
A two-stage compression refrigeration system with an adiabatic liquid-vapor separation unit uses refrigerant-134a as working fluid. The system operates the evaporator at 0.4 MPa, the condenser at 1.6 MPa, and the separator at 0.8 MPa. The compressors use 25 kW of power. Given that the refrigerant is saturated liquid at the inlet of each expansion valve and saturated vapor at the inlet of each compressor, and the compressors are isentropic: (0) show the process on a T-s diagram; ) calculate...
In a vapor-compression refrigeration cycle, ammonia exits the evaporator as saturated vapor at -22°C. The refrigerant enters the condenser at 16 bar and 160°C, and saturated liquid exits at 16 bar. There is no significant heat transfer between the compressor and its surroundings, and the refrigerant passes through the evaporator with a negligible change in pressure. If the refrigerating capacity is 150 kW, determine: (a) the mass flow rate of the refrigerant, in kg/s. (b) the power input to the...
Condenser Compressor An ideal vapor-compression refrigeration cycle is modified to include a counter-flow heat exchanger as shown. Refrigerant 134a leaves the evaporator as saturated vapor at 0.10 MPa and is heated at constant pressure to 20°C before entering the compressor. Following isentropic compression to 1.4 MPa, the refrigerant passes through the condenser and exits at 45°C and 1.4 MPa. The liquid then passes through the heat exchanger and enters the expansion valve at 1.4 MPa. The mass flow rate of...
Most questions answered within 3 hours.
-
An ideal analog-to-digital converter has 6 bits and a 1V input
full-scale input voltage. What is...
asked 1 minute from now -
If a computer which has a 32 bit word has a 34 bit byte
addressable memory...
asked 16 minutes ago -
Group 10 M(II) complexes are often four-coordinate. For Pd and
Pt, these molecules are square planar...
asked 13 minutes ago -
Factors - Analyze factors that contributed to the obsolescence
or dissolution of The Banking Industry, Bank...
asked 19 minutes ago -
he McCumber Corporation data for the current year:
Account
Current
year
Prior
year
Current assets
$76,200...
asked 29 minutes ago -
A ball is tossed from an upper-story window of a building. The
ball is given an...
asked 31 minutes ago -
oceanic ridges represent what percentage of the earths
surface
asked 35 minutes ago -
Biological oxidation of phenylacetic acid is inhibited by
propionic acid present in wastewater. The following data...
asked 46 minutes ago -
It is essential that organizational leaders understand the
competitive, financial, and strategic advantages that can result...
asked 48 minutes ago -
Ziegler-Natta Catalysts have been successfully used to
polymerize the following monomers: (select all that apply)
a....
asked 49 minutes ago -
User documentation _____.
allows users to prepare overall documentation, such as process
descriptions and report layouts,...
asked 57 minutes ago -
A pilot flying low and slow drops a weight; it takes 2.4 s to
hit the...
asked 1 hour ago