Homework Answers
I have solved the question
step by step and neatly so that you can understand the solution
easily and quickly. Hope you thumpsup for the work. Thank you.
Add Answer to:
Problem 3 (50 points). A long stainless steel cylinder with diameter of d=55cm is heated up...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless...
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless steels, is accomplished by heating the bearings to 1010 to 1065 °C then quenching (rapidly cooling) them in oil Consider bearings 24 mm in diameter at an initial uniform temperature of 1050 °C, cooled in an oil bath at 50 °C in which the convective heat transfer coefficient is 600 W/(m2 K). Properties of Type 440C Stainless Steel:t Density, 7800 kg/m3 Thermal conductivity, 24...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) i...
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 K and 10 W/m2 K, respectively. Radiatior heat transfer is negligible. Determine the rate of heat transfer to the iced water in the tank. room 25°0c T. Iced water 0...
Water at an average velocity of 3.5 m/s flows through a 5-m-long stainless steel tube (k...
Water at an average velocity of 3.5 m/s flows through a 5-m-long stainless steel tube (k = 14.2 W/m °C) in a boiler. The inner and outer diameters of the tube are Di = 1.0 cm and Do = 1.4 cm, respectively. If the convection heat transfer coefficient at the outer surface of the tube where boiling is taking place is ho = 8400 W/m2 • °C, determine product of the overall heat transfer coefficient Ui by the inner surface...
Bi = 0.01 D Question 3 9 pts A cylinder of length, 0.53 m and a...
Bi = 0.01 D Question 3 9 pts A cylinder of length, 0.53 m and a diameter of 0.04 m is initially at 32 Celsius. The cylinder is placed into a gas which has a temperature of 228 Celsius with a convection heat transfer coefficient of 209 W/m2 K. How long does it take for the cylinder to reach 100 Celsius (in seconds). The material properties of the cylinder are: k- 52 W/m K, density 8949 kg/m3, Cp-406 J/kg K....
Problem 2. A long 6.5 cm diameter solid cylinder steel (K 16.3 W/m. K,p 7817 kg/m3,...
Problem 2. A long 6.5 cm diameter solid cylinder steel (K 16.3 W/m. K,p 7817 kg/m3, Cp 460 J/kg.k). It's initially at a uniform temperature of T 150°C. It is suddenly exposed to a convection environment with h-285 W/m2 K and Too 50°C. Calculate the temperature at 1.) the axis of the cylinder, and 2.) a 2.5 cm radial distance after 5 min of exposure to the cooling flow. (20%)
One end of a long rod 3 cm in diameter is inserted into a furnace with the
One end of a long rod 3 cm in diameter is inserted into a furnace with the (3 outer end projecting into the outside air. Once the steady state is reached the temperature of the rod is measured at two points, 15 cm apart and found to be 140°C and 100°C, when the atmospheric air is at 30°C with convection coefficient of 20 W/m2.K. Calculate the thermal conductivity of *.the rod material Consider a stainless steel spoon(k = 15.1 W/m.K), partially...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate at a velocity of 0.02 m/s. The stainless steel plate (k=19 W/mK) has 1.15 meter long in the flow direction) and the plate width is 0.7 meter. The plate has a uniform surface temperature of 70°C. Determine, 1. The average friction coefficient 2. The total drag force due to friction (N) 3. The average convection heat transfer 2. coefficient (W/m K) 4. The steady...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Problem 2: A stainless steel rod (k-21 W/m-K, p-8000 kg/m3, C,,-570 J/kg-K) with diameter D-10 mm is heat-treated as it passes through a furnace at a speed of 2 cm/s. The furnace has a convection coefficient of 80 W/m2-K and an air temperature of 900°C. The furnace is 3 m long, and the stainless steel enters at 20°C. (a) Using a control volume of length S traveling with the rod, develop a differential equation for the rate of change of...
4. Hardening of ball bearings made from Type 440C stainless steel, one of the hardest stainless steels, is accomplished by heating the bearings to 1010 to 1065 °C then quenching (rapidly cooling) them in oil Consider bearings 24 mm in diameter at an initial uniform temperature of 1050 °C, cooled in an oil bath at 50 °C in which the convective heat transfer coefficient is 600 W/(m2 K). Properties of Type 440C Stainless Steel:t Density, 7800 kg/m3 Thermal conductivity, 24...
A large stainless steel (AISI 316) plate having a thickness of 5 mm is initially at a temperature of 70°C, and both sides of the plate are suddenly exposed to a convection environment at 20°C with the heat transfer coefficient of h= 800 W/m 2 oC. What will be the center and surface temperatures of the plate after 10 s? For stainless steel (AISI 316), α = 348x10-6 m2/s and k = 13.4 W/m K.
H8-1: An 8-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k-15 W/m K) is used to store iced water at 0°C. The tank is located in a room whose temperature is 25°C. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m2 K and 10 W/m2 K, respectively. Radiatior heat transfer is negligible. Determine the rate of heat transfer to the iced water in the tank. room 25°0c T. Iced water 0...
Water at an average velocity of 3.5 m/s flows through a 5-m-long stainless steel tube (k = 14.2 W/m °C) in a boiler. The inner and outer diameters of the tube are Di = 1.0 cm and Do = 1.4 cm, respectively. If the convection heat transfer coefficient at the outer surface of the tube where boiling is taking place is ho = 8400 W/m2 • °C, determine product of the overall heat transfer coefficient Ui by the inner surface...
Bi = 0.01 D Question 3 9 pts A cylinder of length, 0.53 m and a diameter of 0.04 m is initially at 32 Celsius. The cylinder is placed into a gas which has a temperature of 228 Celsius with a convection heat transfer coefficient of 209 W/m2 K. How long does it take for the cylinder to reach 100 Celsius (in seconds). The material properties of the cylinder are: k- 52 W/m K, density 8949 kg/m3, Cp-406 J/kg K....
Problem 2. A long 6.5 cm diameter solid cylinder steel (K 16.3 W/m. K,p 7817 kg/m3, Cp 460 J/kg.k). It's initially at a uniform temperature of T 150°C. It is suddenly exposed to a convection environment with h-285 W/m2 K and Too 50°C. Calculate the temperature at 1.) the axis of the cylinder, and 2.) a 2.5 cm radial distance after 5 min of exposure to the cooling flow. (20%)
During a cooling process of a stainless steel plate, water at 30°C flows over this plate at a velocity of 0.02 m/s. The stainless steel plate (k=19 W/mK) has 1.15 meter long in the flow direction) and the plate width is 0.7 meter. The plate has a uniform surface temperature of 70°C. Determine, 1. The average friction coefficient 2. The total drag force due to friction (N) 3. The average convection heat transfer 2. coefficient (W/m K) 4. The steady...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Most questions answered within 3 hours.
-
How does over-voltage of the diode usually occur?
asked 6 minutes ago -
If you step on a dirty nail, your doctor will recommend you
update your Tetanus vaccination....
asked 7 minutes ago -
Suppose that decreases in the price of milk lead to decrease s
in the retail prices...
asked 9 minutes ago -
To get a sample of a certain size, scores are taken one-by-one
from the observed data...
asked 15 minutes ago -
A check-processing center uses exponential smoothing to forecast
the number of incoming checks each month. The...
asked 24 minutes ago -
Teams with high levels of ______ and ______ deal with task
conflict better than those without...
asked 36 minutes ago -
Create a C++ project called lab3b and add the following source
code init_struct.cpp to the project....
asked 47 minutes ago -
12.
A budget that can be easily adjusted to show budgeted revenues,
costs, and cash flows...
asked 55 minutes ago -
________ unemployment changes slowly and depends on
________.
Select one:
a. Frictional; the rate at which...
asked 1 hour ago -
These surveys collect information in low- and
middle-income countries regarding the total fertility rate and the...
asked 1 hour ago -
I need to determine the concentration of hydrogen peroxide in a
solution using titrimetric analysis
25...
asked 1 hour ago -
Your are the Vice-President of operations for a New Orleans food
chain. In the aftermath of...
asked 1 hour ago