2- An ideal spectrum analyzer displays the output of an AM transmitter
2- An ideal spectrum analyzer displays the output of an AM transmitter 2. An ideal spectrum...
An AM receiver is tuned to broadcast station at 600 kHz. Calculate the image rejection in dB, assuming that the input filter consist of one tuned circuit with a Q of 40? An SSB system transmit a peak envelope power of 100 W into a 75 ohms load. The carrier signal is modulated by two tones, with frequencies 2 kHz and 3 kHz with equal magnitude and only the lower sideband is transmitted with a suppressed carrier. Determine the average...
An AM receiver is tuned to broadcast station at 600 kHz. Calculate the image rejection in dB, assuming that the input filter consist of one tuned circuit with a Q of 40? An SSB system transmit a peak envelope power of 100 W into a 75 ohms load. The carrier signal is modulated by two tones, with frequencies 2 kHz and 3 kHz with equal magnitude and only the lower sideband is transmitted with a suppressed carrier. Determine the average...
Question 1 0/1 pts An AM broadcast transmitter is modulated with: m (t)A cos 2Tfit + B cos 2Tf2t where A 0.45 V B- 0.40 V, the carrier frequency is 100 kHz, and the amplitude of the carrier is 125 V. Find the normalized average power of the modulated signal State your answer in Watts, to two decimal places. You Answered 7812.59 Correct Answer 8520.51 margin of error+/-0.02
Question 1 0/1 pts An AM broadcast transmitter is modulated with: m...
1
2
4. The amplitude modulation signal is given by the following expression and is applied to 75 load. Vam(t) = 10 sin (21fct) - 2.5 cos (1500krt) + 2.5 cos (1450krt) V Determine: a) Modulation index b) The frequency of the carrier and the information signal c) The bandwidth d) The total power e) The transmission power efficiency be ar e 5. One of the inputs to a frequency modulator is a 250 kHz carrier signal with amplitude of...
#3) For an AM-TC signal, the positive envelope of the modulated signal is within the range of 8V and 12V. Find the modulation index. Also, if the baseband signal is +2 V, 4 kHZ, and carrier is 40 kHz, show the frequency spectrum with all values
AMPLITUDE MODULATION 1. Study in time and frequency domains of AM signals This AM signal is represented below The x-axis has graduations in 10 seconds and y-axis has graduations in volts. 1.1 From this time display, find the values of Ach and μ. Give the name of these parameters. Comment on the waveform of the message signal, find its frequency f 1.2 Draw the amplitude spectrum IS(DI with a bilateral representation. Put graduations on the axes (in hertz and volt)....
Assume that an AM transmitter is modulated with a video testing signal given by em(t) = =20 + 60 sin (2πf1t), where f1 = 3.57 MHz. Let the carrier signal c(t) = Ac cos(2πfct), where Ac = 100 and fc = 100 MHz. The AM signal is fed into a 50-Ω load. (a) Derive an expression for the AM DSB-FC signal in time domain. (b) Construct the AM waveform, giving numerical values of the maximum amplitude, Amax and the minimum...
What is the total average power for a commercial AM transmitter with an unmodulated carrier power of 20 kW and 100% modulation? 20 kW 30 kW 53.34 kW 80 kW
71. A superheterodyne receiver tunes at the frequency range from 25 to 50 MHz. What is the IF frequency of the receiver if the range of the local oscillator is 10 MHz to 35MHz 75. An AM transmitter uses high-level modulation. The RF power amplifier draws 12 A from 22 V supply putting out a carrier power of 140 Watts. What impedance would be seen at the modulation transformer secondary? 72. A receiver has a sensitivity of 0Suv and blocking...
comms systems theory:
Exercise 4: Calculate the required transmitter power Sr of DSC-SC, SSB, and conventional AM (DSC+carrier) systems for transmitting an audio signal which has a bandwidth of 10 kHz with an output SNR of 40 dB. Assume that the channel introduces a 30 dB power loss and the channel noise is white noise with a power spectral density of η/2-10-9 W/Hz. Assume μ2Sm-0.5 for the conventional AM system.
Exercise 4: Calculate the required transmitter power Sr of DSC-SC,...