The venturi flowmeter shown in the figure is used to measure the flow rate of water...
The venturi flowmeter shown in the figure is used to measure the flow rate of water in a solar collector system. The flowmeter is inserted in a pipe with diameter 1.9 cm ; at the venturi of the flowmeter the diameter is reduced to 0.64 cm . The manometer tube contains oil with density 0.82 times that of water. If the difference in oil levels on the two sides of the manometer tube is 1.7 cm , what is the volume flow rate?
Homework Answers
Add Answer to:
The venturi flowmeter shown in the figure is used to measure the
flow rate of water...
A Venturi flowmeter is used to measure the flow rate of water (see the figure below)....
A Venturi flowmeter is used to measure the flow rate of water (see the figure below). The flowmeter is inserted in a water pipe that has a diameter of 2 cm. At the narrow section, the diameter of the pipe is 0.8 cm. The U-tube contains oil with density 0.85 g/cm3. If the difference in the oil level on the two sides of the flowmeter is 1.5 cm, what is the volume flow rate of water through the pipe? The...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate of water at 15°C (p = 999.1 kg/m”) through a 5-cm- diameter horizontal pipe. The diameter of the Venturi neck is 3 cm, and the measured pressure drop is 5.1 kPa. Taking the discharge coefficient to be 0.98, determine the volume flow rate of water and the average velocity through the pipe. 5 cm 3 cm Differential pressure gage Is The volume flow rate...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is used at a service station to measure the flow rate of gasoline (ρ = 7.00 ✕ 102 kg/m3)through a hose having an outlet radius of 1.28 cm. The difference in pressure is measured to be P1 − P2 = 1.70 kPa and the radius of the inlet tube to the meter is 2.56 cm. (a) Find the speed of the gasoline...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is used at a service station to measure the flow rate of gasoline (ρ = 7.00 ✕ 102 kg/m3) through a hose having an outlet radius of 1.58 cm. The difference in pressure is measured to be P1 − P2 = 1.40 kPa and the radius of the inlet tube to the meter is 3.16 cm. (a) Find the speed of the...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is used at a service station to measure the flow rate of gasoline (p 7.00 x 102 kg/m3) through a hose having an outlet radius of 1.47 cm. The difference in pressure is measured to be P1 P2 1.10 kPa and the radius of the inlet tube to the meter is 2.94 cm (a) Find the speed of the gasoline as it...
Water flows through a Venturi meter with a pipe diameter of 10.0 cm and a constriction...
Water flows through a Venturi meter with a pipe diameter of 10.0 cm and a constriction diameter of 5.6 cm. The U-tube manometer is partially filled with mercury. Find the flow rate of the water in the pipe of 10.0 cm diameter if the difference in the mercury level in the U-tube is 3.0 cm. Answer in L/s
A venturi meter was installed in a pipe to measure the flow of the water inside....
A venturi meter was installed in a pipe to measure the flow of the water inside. The inlet diameter of the venturi is 25.4mm and the throat diameter is 12.7mm. Determine the actual flow rate in gpm if the throat Reynolds number is 10^5. The density and viscosity of the fluid is 62.4 Ibm/ft^3 and 3.511kg/m-hr, respectively. The venturi coefficient of discharge is 0.95.( do include unit/s in your answer and use two decimal places)
The figure shows a Venturi flow characterized by a a smooth contraction of the pipe diameter...
The figure shows a Venturi flow characterized by a a smooth contraction of the pipe diameter D, to a throat diameter D2. The Venturi flow meter is connected to a n-tube manometer at location A where the pipe diameter is D, and to the throat of the contraction at location E where the diameter is D2. Assuming that the density of the air inside the n-tube is negligible, use your knowledge on hydrostatics, continuity and Bernoulli equation to calculate the...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12 m²/s. The inside Assume no head loss from point 1 to point 2. A mercury manometer is used to measure the pressure ipe diameter is reduced from 32 cm at point I to 16 cm at point 2. Point 1 is 28 cm lower than point 2. difference, as shown in the sketch. (a) Calculate the Reynolds number of the flow in the pipe...
Venturi meter provided in a vertical pipeline carries oil of specific gravity 0.88 as shown in...
Venturi meter provided in a vertical pipeline carries oil of specific gravity 0.88 as shown in the Figure below. The diameter at the entrance and throat are 30 cm and 15 cm, respectively. A U-tube manometer filled with mercury of density 13600kg/m3 is connected to the entrance and throat of the meter . The height difference between the throat and entrance is 30cm. if the actual flow rate is 80 L/s and the coefficient of discharge of the meter is...
A Venturi flowmeter is used to measure the flow rate of water (see the figure below). The flowmeter is inserted in a water pipe that has a diameter of 2 cm. At the narrow section, the diameter of the pipe is 0.8 cm. The U-tube contains oil with density 0.85 g/cm3. If the difference in the oil level on the two sides of the flowmeter is 1.5 cm, what is the volume flow rate of water through the pipe? The...
A Venturi meter equipped with a differential pressure gage is used to measure the flow rate of water at 15°C (p = 999.1 kg/m”) through a 5-cm- diameter horizontal pipe. The diameter of the Venturi neck is 3 cm, and the measured pressure drop is 5.1 kPa. Taking the discharge coefficient to be 0.98, determine the volume flow rate of water and the average velocity through the pipe. 5 cm 3 cm Differential pressure gage Is The volume flow rate...
The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is used at a service station to measure the flow rate of gasoline (p 7.00 x 102 kg/m3) through a hose having an outlet radius of 1.47 cm. The difference in pressure is measured to be P1 P2 1.10 kPa and the radius of the inlet tube to the meter is 2.94 cm (a) Find the speed of the gasoline as it...
A venturi meter was installed in a pipe to measure the flow of the water inside. The inlet diameter of the venturi is 25.4mm and the throat diameter is 12.7mm. Determine the actual flow rate in gpm if the throat Reynolds number is 10^5. The density and viscosity of the fluid is 62.4 Ibm/ft^3 and 3.511kg/m-hr, respectively. The venturi coefficient of discharge is 0.95.( do include unit/s in your answer and use two decimal places)
The figure shows a Venturi flow characterized by a a smooth contraction of the pipe diameter D, to a throat diameter D2. The Venturi flow meter is connected to a n-tube manometer at location A where the pipe diameter is D, and to the throat of the contraction at location E where the diameter is D2. Assuming that the density of the air inside the n-tube is negligible, use your knowledge on hydrostatics, continuity and Bernoulli equation to calculate the...
..Liquid water at 20°C flows through an inclined Venturi meter at a flow rate of 0,12 m²/s. The inside Assume no head loss from point 1 to point 2. A mercury manometer is used to measure the pressure ipe diameter is reduced from 32 cm at point I to 16 cm at point 2. Point 1 is 28 cm lower than point 2. difference, as shown in the sketch. (a) Calculate the Reynolds number of the flow in the pipe...
Most questions answered within 3 hours.
-
Six years of quarterly data of a seasonally adjusted series are
used to estimate a linear...
asked 6 minutes ago -
Which of the following is not an ecological model used
to foster behavior change?
PRECEDE-PROCEED Model...
asked 9 minutes ago -
On the Apollo 14 mission to the moon, astronaut Alan Shepard hit
a golf ball with...
asked 5 minutes ago -
What are John’s potential claims if he is terminated
this week?
John is a 54-year-old man...
asked 19 minutes ago -
A (8.5) cm tall object is placed at a distance of (14.2) cm from
a convex...
asked 27 minutes ago -
(2) For the following questions, consider a data set that
exhibits a normal distribution. Report the...
asked 28 minutes ago -
What exactly is an information system? How does it work" What
are its people organization,
...
asked 30 minutes ago -
The Food Marketing Institute shows that 17% of households spend
more than $100 per week on...
asked 39 minutes ago -
Go to NCBI BLAST search web page
1st search: GEKDLRRAKDINQEVYNF
2nd search: PTSQRLQLLEPFDK
3rd search: GEKDLRRAKDINQEVYNF...
asked 43 minutes ago -
Explain how each of the following three conditions could be a
red flag for a register...
asked 47 minutes ago -
In a two-way factorial ANOVA, the final F-ratio for
factor AxB is determined by dividing _____...
asked 1 hour ago -
Show your solutions for answer.
4. An aqueous solution contains 9.21 g of
K4Fe(CN)6 in a...
asked 48 minutes ago