For water flowing through a pipe of uniform cross-section, the average convection coefficient will be higher...

Question

Question

For water flowing through a pipe of uniform cross-section, the average convection coefficient will be higher if the channel i

Answer 1

Answer #1

Answer 2

Similar Homework Help Questions

1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the...

1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the pipe diameter for which transition to turbulence will occur is approximately a. 1.0 cm b. 1.5 cm c.2.0 cm d. 2.5 cm e. 3.0 cm 2. Find the Reynold number, the roughness parameter, the friction factor f and the pressure drop for flow of water at 20 C through a 5 cm diameter pipe of roughness height E=0.5 mm if the flow rate is...
3. (a) For the flow of a real fluid (p, u) in a rough (e measures losses lead to a pressure gradient along the pipe - A...

3. (a) For the flow of a real fluid (p, u) in a rough (e measures losses lead to a pressure gradient along the pipe - Ap/L. Determine an expression for the pressure roughness) horizontal pipe energy Ap ( L pV2 gradient for a pipe of diameter - d, flowing with a mean velocity - V. pVd'd d (b) If for a 75mm diameter pipe flowing with water at 0.25m/s the measured pressure drop is 120Pa/m What will be the...
Water is flowing in a straight horizontal pipe of variable cross section. Where the cross-sectional area...

Water is flowing in a straight horizontal pipe of variable cross section. Where the cross-sectional area of the pipe is 3.70·10-2 m2, the pressure is 8.10·105 Pa and the velocity is 0.660 m/s. In a constricted region where the area is 16.90·10-4 m2, what is the velocity? Tries 0/15 What is the pressure (in Pa)? (Assume an ideal fluid)

Water flowing through a pipe suddenly comes to a section of pipe where the pipe diameter...

Water flowing through a pipe suddenly comes to a section of pipe where the pipe diameter decreases to 86% of its previous value. If the speed of the water in the larger section of the pipe was 36 m/s, which is its speed in this smaller section?
Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of...

Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of pipe where the diameter is d1= 19.2 cm and the pressure is known to be P1= 7.00×104 N/m2 above atmospheric pressure. 1- If the pipe carries the water 3.5 meters up hill without any change in diameter, what is the new absolute pressure within the pipe? 2- After flowing up the hill described above, the pipe narrows to 80% of its original radius, what...
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows...

Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows to an inside diameter of 3.75cm. Assume the water is an ideal incompressible fluid. What is the velocity of the fluid initially, v_1 (when It is flowing in the 8.00cm diameter section) if the velocity of the water in the narrow part of the pipe is measured at V_2 = 27m/s? If the initial pressure is known to be 670 kPa what is the...

H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. ...

H2.3 Consider water at 20°C flowing through a horizontal pipe of diameter 15 cm and length 10 m. The flowrate is 0.021 m3/s and the wall shear stress is 5.76 N/m2. Assume fully developed flow. a. Verify that the flow is turbulent b. Determine the pressure drop [N/m2 c. Estimate the viscous sublayer thickness [mm], i.e., where y+ 5 d. Compare results of part c. with typical pipe roughness (see Table 8.1 in text and comment on implication e. Using...
10. Water flows through 5 meter lonq section of concrete pipe with a diameter of 10.5...

10. Water flows through 5 meter lonq section of concrete pipe with a diameter of 10.5 cm at a velocity of 6.4 m/s. The friction factor, based on the Reynolds number and surface roughness is 0.035. The density of water is 1000 kg/mA3. What is the pressure drop along the 5 meter long section of pipe? Round your answer to the nearest tenth of a kPa-
A gas is flowing through a pipe with cross section area = 40 Cm2, pressure =50...

A gas is flowing through a pipe with cross section area = 40 Cm2, pressure =50 N/Cm2 and temperature =15 CO. Find the velocity through the pipe if the mass flow rate =0.5 Kg/s and the gas constant =292 j/kg ko Select one: a. 19.44 m/s O b. 21.02 m/s O c. 22.89 m/s O d. 23.4 m/s O e. 20.12 m/s

Water at 20 C is steadily flowing through a diverging pipe section that is inclined by...

Water at 20 C is steadily flowing through a diverging pipe section that is inclined by an angle of 30° with respect to the horizontal (See the figure) The total testing section length is 20 m long with an initial pipe diameter of 10 mm (Section 1) and final diameter of 20 mm (Section 2). The small diameter section shows a gage pressure of 100 kPa and average flow velocity 10 m/s. Other values will be obtained by reaching complete...