2.
Ans :Option (a),(b),(c)
Power conditioning equipment in the P V system is an system which provide us a facility to charge the battery bank
It consist of Solar charger (Charge controller) , M P P T, Inverter, Grid charger , Output selector mechanism, Control algorithm
3.
Ans:Option (a)
Pulse width modulation is the process of modifying the width of pulses in a pulse train in direct proportion to small control signal .In P W M inverter output waveform can be controlled . Fundamental Frequency of output waveform is same as the input waveform frequency . Frequency of waveform can be control by employing 3 single phase inverter and changing the frequency of input waveform
4.
Ans: Option (a)
The balance of system of P V system consist of components of all photo voltaic system except the photo voltaic panel. It includes wiring , switches , Mounting system ,solar inverters ,Battery bank and battery charger .
5.
Ans: Option (a)
As we need total of !2V and we have 6V batteries we can connect two batteries .
2. Power conditioning equipment in the PV system includes (a) Charge controller (b) Inverter (c) MPP...
3. Analyze this PV/battery system (ignore battery discharge rate and temperature constraints): 1. PV Module characteristics: PR-100W, VR-20V, Voc 22V, IR-5A, Isc 6A 2. Battery characteristics: 6V, 100Ah (each) 3. Coulomb efficiency 90%; Maximum discharge 80% 4. Insolation: 6 kWh/m'day 5. Inverter efficiency: 80%; 6, Dirt, etc, efficiency: 90% (10% loss) 6 kW/m2-day 80% efficient AC 6V 100 Ah a. Find the watt-hours/day that would reach the loads (assume all PV current passes through the batteries): b.If the load requires...
A Single-phase halfwave controlled rectifier is used for a heating system whose rated power is 15kW at 220V. The SCR is connected to a 220 VAC system. 1. Determine the rated equivalent resistance of the heater2. Determine the maximum that the rectifier can provide to the heater3. When the SCR is fired at angle of p/3, determinea. Waveform of the voltages across the load, the SCRb. Waveform of the currents flow through the SCR, drawn by the load and supplied...