Homework Answers
Add Answer to:
Base your answers to questions 76 through 80 on the diagram below, which represents an electrical...
All of them have short answers. 1. If a 19.9mA current source, a 32.6kΩ resistor, a...
All of them have short answers. 1. If a 19.9mA current source, a 32.6kΩ resistor, a 49.6kΩ resistor and a 42.6kΩ resistor are all connected in parallel, then what is the current through the 42.6kΩ resistor in milliamps? 2. If a 8.9V voltage source is applied across a 43.6kΩ resistor connected in series with a 25.3kΩ resistor, then what is the voltage across the 25.3kΩ resistor in volts? 3. If the Thevenin equivalent for a circuit is a 5.5V voltage...
48. If a 5.6pF capacitor, a 49.3pF capacitor and a 35.5pF capacitor are all connected in...
48. If a 5.6pF capacitor, a 49.3pF capacitor and a 35.5pF capacitor are all connected in series, then what is the total capacitance of this series combination in pico Farads? 50. If the Thevenin equivalent for a circuit is a 5V voltage source in series with a 5.3kΩ resistor, then what is the Norton equivalent current for this circuit in milliamps? 51. If the Norton equivalent for a circuit is a 2.2mA current source in parallel with a 23kΩ resistor,...
1. Choose yes or no in the answers to the following questions. (a) To measure the...
1. Choose yes or no in the answers to the following questions. (a) To measure the resistance of a resistor in a circuit you need to break the circuit, i.e., pull out a leg of the resistor from the circuit. Answer: Yes(), No (b) To measure the voltage across a resistor in a circuit you need to break the circuit, i.e., pull out a leg of the resistor from the circuit. Answer: Yes ( ), No。 (c) To measure the...
Using Matlab When several resistors are connected in an electrical circuit in parallel, the current through...
Using Matlab When several resistors are connected in an electrical circuit in parallel, the current through each of them is given by in=vs/Rnwhere in and Rn are the current through resistor n and its resistance, respectively, and vs is the source voltage. The equivalent resistance, Req, can be determined from the equation 1/Req=1/R1+1/R2+1/R3+.......+1/Rn. The source current is given by is , and the power, Pn, dissipated in each resistor is given by . is=vs/Req, and Pn=vsin. Write a program in...
12. Given the circuit below in which R, is in series with Ry and R, in...
12. Given the circuit below in which R, is in series with Ry and R, in parallel, which are in series with R., Rs, and calculate Reg, V2. I2. Vs, and Is assuming that Vab -100 Volts across the entire circuit. in series, R, 30- R2 30 15. Four 60W incandescent light bulbs are attached in parallel to a 120 V power source. A) What is the equivalent resistance, Rag of the circuit? B) What is the resistance of each...
QUESTION 5 Consider the circuit diagram below. Choose the correct answers about the circuit below. More...
QUESTION 5 Consider the circuit diagram below. Choose the correct answers about the circuit below. More than one may be correct. R2 = 5760 W R576 w А R = 576 120 V The equivalent resistance of the circuit is 864 Ohms. The voltage across the resistor R1 moving clockwise from the positive side of the battery is equal to the voltage across the parallel combination of R2 and R3, 60 V. The current supplied by the battery is 0.14...
8. Suppose the voltage output of a battery is 10.0V in a series circuit, and the...
8. Suppose the voltage output of a battery is 10.0V in a series circuit, and the resistances are Ri=4.0012, R2=5.0092, and R3=6.002. a. Draw a diagram of the circuit, and determine the total resistance, the current through each resistor, the voltage drop across each resistor, and the power dissipated by each resistor and the source. 9. Suppose the voltage output of a battery is 10.0V in a parallel circuit, and the resistances are Ri=4.0012, R=5.0002, and R3=6.092. b. Draw a...
4) Given the circuit below. The voltage is 5 volts and each resistor is 10 ohms....
4) Given the circuit below. The voltage is 5 volts and each
resistor is 10 ohms. The current flowing through the circuit (when
measured by an ideal ammeter) is 1 amp.
a) Show current through the circuit is 1 A.
Next, assume you put a DMM (in ammeter mode) which has a
resistance of one ohm at point A. Recalculate the equivalent
resistance of the circuit.
b) What is the current flowing through the circuit now.
This is the current...
Can someone please check my sig figs and answers? i have two different answers for the last quest...
can someone please
check my sig figs and answers? i have two different answers for the
last question but they are off by .40. thank you!
A student set up the circuit shown to the right. Please use R1-2.00 ohms, R2-4.00 ohms, R3 -3.00 ohms, R 1.00 ohms, Rs 5.00 ohms, and a power supply setting of 6.00 volts. (a) Write the symbolic expressionoW Power Supply calculating the effective resistance of two resistors, R4 and Rs, in parallel. (b) Write...
Pease answer questions 4 and 5! Thank you so much! 4. Connect the 2nd resistor in...
Pease answer questions 4 and 5! Thank you so much!
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 = ____________ A
Is the following statement true? I = I1 +...
1. Choose yes or no in the answers to the following questions. (a) To measure the resistance of a resistor in a circuit you need to break the circuit, i.e., pull out a leg of the resistor from the circuit. Answer: Yes(), No (b) To measure the voltage across a resistor in a circuit you need to break the circuit, i.e., pull out a leg of the resistor from the circuit. Answer: Yes ( ), No。 (c) To measure the...
12. Given the circuit below in which R, is in series with Ry and R, in parallel, which are in series with R., Rs, and calculate Reg, V2. I2. Vs, and Is assuming that Vab -100 Volts across the entire circuit. in series, R, 30- R2 30 15. Four 60W incandescent light bulbs are attached in parallel to a 120 V power source. A) What is the equivalent resistance, Rag of the circuit? B) What is the resistance of each...
QUESTION 5 Consider the circuit diagram below. Choose the correct answers about the circuit below. More than one may be correct. R2 = 5760 W R576 w А R = 576 120 V The equivalent resistance of the circuit is 864 Ohms. The voltage across the resistor R1 moving clockwise from the positive side of the battery is equal to the voltage across the parallel combination of R2 and R3, 60 V. The current supplied by the battery is 0.14...
8. Suppose the voltage output of a battery is 10.0V in a series circuit, and the resistances are Ri=4.0012, R2=5.0092, and R3=6.002. a. Draw a diagram of the circuit, and determine the total resistance, the current through each resistor, the voltage drop across each resistor, and the power dissipated by each resistor and the source. 9. Suppose the voltage output of a battery is 10.0V in a parallel circuit, and the resistances are Ri=4.0012, R=5.0002, and R3=6.092. b. Draw a...
4) Given the circuit below. The voltage is 5 volts and each
resistor is 10 ohms. The current flowing through the circuit (when
measured by an ideal ammeter) is 1 amp.
a) Show current through the circuit is 1 A.
Next, assume you put a DMM (in ammeter mode) which has a
resistance of one ohm at point A. Recalculate the equivalent
resistance of the circuit.
b) What is the current flowing through the circuit now.
This is the current...
can someone please
check my sig figs and answers? i have two different answers for the
last question but they are off by .40. thank you!
A student set up the circuit shown to the right. Please use R1-2.00 ohms, R2-4.00 ohms, R3 -3.00 ohms, R 1.00 ohms, Rs 5.00 ohms, and a power supply setting of 6.00 volts. (a) Write the symbolic expressionoW Power Supply calculating the effective resistance of two resistors, R4 and Rs, in parallel. (b) Write...
Pease answer questions 4 and 5! Thank you so much!
4. Connect the 2nd resistor in parallel with the 1st
resistor and connect that combination to the battery.
Measure
the following:
The
current passing through the R1, I1 = ___0.0058____ A
The
current passing through the R2, I2 = ___0.0031____ A
The
current supplied by the battery, I = ___0.0092____ A
Calculate I1 + I2 = ____________ A
Is the following statement true? I = I1 +...
Most questions answered within 3 hours.
-
A business executive has the option to invest money in two
plans: Plan A guarantees that...
asked 1 hour ago -
Hello, can someone please help me answer this question?
How much heat is absorbed by a...
asked 1 hour ago -
. A marketing researcher conducted a survey of 25 shoppers
randomly selected at the local mall...
asked 1 hour ago -
Create an comprehensive response to the
following:
Antimicrobial agents work on a multitude of microbes (bacteria,...
asked 1 hour ago -
6.13 LAB: Step counter. Section 6.3.
A pedometer treats walking 2,000 steps as walking 1 mile....
asked 1 hour ago -
(14.2) A block of mass m = 10 kg riding on a frictionless
horizontal plane is...
asked 1 hour ago -
Use any search engine to search for articles about Starbucks
partnership with Tata Companies in India...
asked 1 hour ago -
Let’s say that for some reason Bank Excess Reserves suddenly
increase sharply. What effect would this...
asked 1 hour ago -
Given:
Curent Assets: $600,000
Total Assets: $2,600,000
Current Liabilities: $500,000
Total Liabilities: $1,700,000
What is the...
asked 1 hour ago -
1. What is a “Bankster”? What is insider trading? Why is it
illegal?
2. What is...
asked 1 hour ago -
A transverse wave on a cord is given by
D(x,t)=0.18sin(2.7x−61.0t), where Dand x are in m...
asked 1 hour ago -
ASSIGNMENT
ANSWER ANY TWO OF THE FOLLOWING IN 2-3 PARAGRAPHS OF EACH
QUESTION.
1: Where is...
asked 1 hour ago