A single disk clutch with both sides effective is used to run a machine through a shaft rotating at uniform speeds of 240rpm. Assume © 0.25. di=120mm. Do=240mm. Maximum intensity of pressure 120KPA. MOI= 7 kg-m2. Determine 1. time required to attain the full speed by machine and 2. energy lost in slipping of the clutch
A single disk clutch with both sides effective is used to run a machine through a...
A friction clutch is used to rotate a machine from a shaft rotating at a uniform speed of 250 r.p.m. The disc-type clutch has both of its sides effective with a friction coefficient of 0.3. The outer and the inner diameters of the friction plate are 200 mm and 120 mm respectively. The intensity of pressure is not to be more than 100 kN/m², calculate i. the power transmitted by this clutch based on the theory of uniform wear, ii....
3. A single plate clutch, effective on both sides, is required to transmit 25 kW at 3000 r.p.m. Determine the outer and inner radii of frictional surface if the coefficient of friction is 0.255, the ratio of radii is 1.25 and the maximum pressure is not to exceed 0.1 N/mm². Also determine the axial thrust to be provided by springs. Assume the theory of uniform wear. (2 marks)
summatize the following info and break them into differeng key points. write them in yojr own words apartus 6.1 Introduction—The design of a successful hot box appa- ratus is influenced by many factors. Before beginning the design of an apparatus meeting this standard, the designer shall review the discussion on the limitations and accuracy, Section 13, discussions of the energy flows in a hot box, Annex A2, the metering box wall loss flow, Annex A3, and flanking loss, Annex...