Using Pascal's law
3. A hydraulic lift with pistons of radius 31 cm and 1.2 m is used to...
In a hydraulic lift, there are two circular pistons of radius 0.1 m and 1.5 m. If a force of 20 N were applied to the smaller piston, how big of an output force could be achieved?
Required information In a hydraulic lift, the radil of the pistons are 2.25 cm and 10.0 cm. A car weighing W = 10.0 kN is to be lifted by the force of the large piston. Find the mechanical advantage of the lift Numeric Response
Two pistons of a hydraulic lift have radii of 2.2cm and 10.8cm. A mass of 1.71×103kg is placed on the larger piston. Calculate the minimum downward force needed to be exerted on the smaller piston to hold the larger piston level with the smaller piston.
A hydraulic lift has pistons that are 1 cm and 15 cm in diameter. If a force of 180 N is applied to the master cylinder, what is the largest mass that the lift can support?
In a hydraulic lift, the radius of the input piston is 5.0 cm and the radius of the output piston is 30.0 cm. (a) If a force of 20.0 N is applied to the input piston, how much weight can the output piston lift? moves a vertical distance of 0.80 cm, then how much does the input piston move? (b) If the output piston ww.ai d ae
The answer is E A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m^3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at...
A 14,192-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oll with a density of 900 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 19.3 cm and the narrower arm has a radius of 3 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level....
Two pistons of a hydraulic ift have radi of 2.64 cm and 10.5 em. A mass of 1.85 x 10 kg is placed on the larger piston. Calculate the minimum downward force needed to be exerted on the smaller piston to hold the larger piston level with the smaller piston Number Units Hint Penalty Hint 0.0 View Hint
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must...
A hydraulic lift has two connected pistons with cross-sectional areas 5 cm2 and 250 cm2. It is filled with oil of density 670 kg/m3. 1. What mass must be placed on the small piston to support a car of mass 1200 kg at equal fluid levels? m = 24kg 2. With the lift in balance with equal fluid levels, a person of mass 70 kg gets into the car. What is the equilibrium height difference in the fluid levels in...