Required information In a hydraulic lift, the radil of the pistons are 2.25 cm and 10.0...
3. A hydraulic lift with pistons of radius 31 cm and 1.2 m is used to lift a mass of 625 kg a distance of 2.25 m above ground. What force can the smaller piston have?
2. The input and output pistons of a hydraulic jack are 4 cm and 12 cm in diameter. If a lever has a mechanical advantage of 9 and applied 200 Nof force on the input piston, how many pounds can the jack lift at 75% efficiency? 200 N of Force "MA" 9 12cm ? Newtons 4cm
A hydraulic lift has pistons that are 1 cm and 15 cm in diameter. If a force of 180 N is applied to the master cylinder, what is the largest mass that the lift can support?
The answer is E A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m^3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at...
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The output piston has a radius of 79.2 cm, and the total load on the output plungers is 18000 N. If the car (output piston) needs to be lifted 1.70 m, what volume of non-compressible hydraulic fluid must be pumped into the system?
Need ASAP To inspect a 20, 500 N car, it is raised with a hydraulic lift, if the radius of the small piston is 5.0 cm, and the radius of the large it is position is 10 cm, find the force that must be exerted on the small piston to lift the car.
A 10,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must...
A 14,192-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with incompressible oll with a density of 900 kg/m3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 19.3 cm and the narrower arm has a radius of 3 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level....
LEARN MORE REMARKS In this problem, we didn't address the effect of possible differences in the helghts of the pistons. If the column of fluid is higher in the small piston, the fluid weight assists in supporting the car, reducing the necessary applied force. If the column of fluid is higher in the large piston, both the car and the extra fluid must be supported, so additional applied force is required. QUESTION if the radius of the output piston is...
The small piston of a hydraulic lift has a diameter of 8.0 cm, and large piston has a diameter of 40 cm. The lift raises a load of 15,000 N. Determine the force that must be applied to the small piston. Determine the pressure applied to the fluid in the lift.