As we can see that pressure reading is not dependent on any angle so we can say that pressure reading is not change on changing the alignment from horizontal to vertical.
So there should be no effect when venturimeter is not perfectly horizontal
If the Venturi meter was not perfectly horizontal, Do you think that it has an effect...
(c) A venturi meter is mounted in a pipeline of diameter 150 mm, which is inclined at 30° from the horizontal. Water is flowing upwards through the pipeline. The throat diameter of the venturi meter is 90 mm. One static pressure tapping is located at the throat and another 0.3 m upstream in the pipeline. The pressure difference measured between the two tappings is 200 mm of mercury. The coefficient of discharge for the meter is 0.97. Determine the actual...
A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a gas flowing at speed v2 through a horizontal section of pipe whose cross-sectional area is A2-0.0589 m2 The gas has a density of ρ-1.30 kg m3 The Venturi meter has a cross sectiona area of .ם 33m and has been substituted for a section of the larger pipe. The pressure difference between the two sections is P2 P1 154 Pa....
A horizontal venturi meter (160mm * 80mm) used to measure the flow of oil of sp.gr =0.8. determine the deflection of oil -mercury gauge, if discharge oil is 50 lit/s Note: Please write the solution in an official, clear, and clean manner
A venturi meter is a device for measuring the speed of a fluid
within a pipe. The drawing shows a gas flowing at a speed v2
through a horizontal section of pipe whose cross-sectional area A2
= 0.0700 m2. The gas has a density of ϝ = 1.30 kg/m3. The Venturi
meter has a cross-sectional area of A1 = 0.0300 m2 and has been
substituted for a section of the larger pipe. The pressure
difference between the two sections is...
A Venturi meter is a device for measuring the speed of a fluid within a pipe. The drawing shows a l lowing a speed through a horizontal section of pipe whose cross-sectional area is Az - 0.0793 m. The gas has a density of -1.Joka/m. The Ventun meter has a cross-sectional area of A - 0.0706m and has been substituted for a section of the larger pipe. The pressure difference between the two sections is P2P -191 PaFind (a) the...
what do think about the prospect of doctors and patients having productive doctor-patient relationships? Be perfectly honest! If you do not think that there is a possibility that there can be a successful relationship within the climate of today's medical field, say so. If you see the possibility for a successful relationship, say so. If you have mixed feelings, say so.
Part A 2(P,-P) Show that the flow speed measured by a venturi meter (see Figure 13-32 in the textbook) is given by the relation A2 Essay answers are limited to about 500 words (3800 characters maximum, including spaces) 3800 Characters) remaining Submit Request Answer Part B A venturi meter is measuring the flow of water, it has a main diameter of 3.5 cm tapering down to a throat diameter of 1.4 cm. If the pressure difference is measured to be...
DO YOU THINK THAT BILINGUAL HAS AN EFFECT ON LEXICAL DECISION TASKS? WHY OR WHY NOT
Q8 A horizontal pipe 50 mm diameter is fitted with a venturi tube, which has a throat diameter of 40 mm. The pipe carries water at a pressure of 30 kPa gauge and velocity 3 m/s upstream of the throat. Determine: a. The mass flow rate; b. The velocity at the throat C. The pressure at the throat ignoring head losses: d. The pressure at the throat if a head loss equal to 5% of the total head occurs as...
What do you think the psychological effect might be on patients were told by a physician that the symptoms they are experiencing are not real? How do you think healthcare professionals can be more sensitive to this issue? Do you think psychiatric diagnoses are overused in this context?