A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1 W , X1 = 0.4 W, R2’ = 0.12 W , X2’ = 0.4 W, Xm = 20 W , Pr = 1 kW. The motor is operated at 970 rpm what is the The ratio of the stator starting current to full-load current (Istart / Ifull-load)?
A 3-phase, 380 V, 50 Hz , 6 pole, Y-connected induction motor has R1 = 0.1...
A 480 V, 60 Hz, 4-pole-pair, three-phase, delta-connected induction motor has the following parameters: R1=0.42 Ω, R2=0.23 Ω, X1=0.48 Ω, X2=0.29 Ω, Xm=29.71 Ω where: R1 is the stator resistance R2 is the rotor resistance reflected in the stator; X1 is the stator leakage inductance; X2 is the rotor leakage inductance reflected in the stator; Xm is the magnetising inductance; The rotational losses are 2450 W. The motor drives a mechanical load at a speed of...
Please solve this question. Thank you.
A two-pole, 75kW, 440 V, 50 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters, in Ω/phase referred to the stator: R1-0.075, XI 0.17, xm-72, R2-0.065 and X-0.17. Its rated slip is 4%. Assume that the mechanical losses are 1 kW and the core losses are 1.1 kW. Compute: a. The rated input current b. The rated power factor. c. The pullout torque d. The induced and load torques at rated conditions....
A three phase, 60 Hz, 4-pole, Y-connected, 460 V induction motor has the following values: R1=0.54 Ohm R2=0.5 Ohm Xm=51.10 Ohm X1 =2.09 X2=3.21 Ohm It operates with a slip of 0.02 rated input voltage with mechanical losses of 150 W, core loss of 150 W, and stray losses of 50 W. Find the Line current magnitude and the load torque.
Consider a 50 kW, 3-phase, 380 V line-to-line, 50 Hz, 6 pole Y-connected wound-rotor induction motor. The stator winding ac resistance is 0.1 Ω/phase. The effective stator-to-rotor turns ratio is 2. The exciting branch is negligible. It is found that when an external resistor of 0.09 Ω/phase is connected to the rotor terminals maximum starting torque of 1150 Nm is obtained. a. Compute the internal mechanical power and the internal torque developed by this motor when it drives a load...
A 415-V, Y-connected, 4-pole, 50 Hz, three-phase induction motor has the following parameters on a per-phase basis, as referred to the stator: R1 = 0.25 ohms, X1 = 0.75 ohms, R2 = 0.55 ohms, X2 = 1.2 ohms, Xm = 50 ohms. The core loss is 200 W and rotational (mechanical) losses are 200 W. The machine is running at full load at a speed of 1450 r.p.m. Using the exact equivalent circuit, calculate- The total input current, The power factor, The air-gap power developed, The...
A 3 phase, 440 V, 6 pole, 970 rpm, 50 Hz, Y-connected induction motor has the following parameters referred to the stator Rs = 0.2 Ω, Rr'一0.15 Ω, xs-x-= 0.4 Ω The stator to rotor turns ratio is 3.5 The motor speed is controled by the Static Scherbius Drive. The drive is designed for a speed range of 30% below the synchronous speed. The maximum value of firing angle is 170'. Calculate (i) Turns ratio of the transformer (ii) Torque...
A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase equivalent circuit parameters of R1= 2 ohms. R2=2.2 ohms. X1=X2=4 ohms. X(motor)=90 ohms Under rated condition, the rotor slip is 6%. (i) What is the rotor speed and rotor electrical frequency under the rated conditions; (ii) Calculate the stator input current, power factor, and electromagnetic torque under these conditions; (iii) The machine is running at rated conditions and it is to be stopped by switching the two stator leads....
A three-phase, 2.2 kV, 60 Hz, Y-connected induction motor has the following parameters: R1 = 0.2 Ω R2` = 0.4 Ω X1 + X2` = 1.5 Ω The motor’s full load speed is 580 rpm. Ignore the rotational losses and calculate: a. Full load torque b. Output power rating c. Starting current d. Starting torque
A three-phase, 2.2 kV, 60 Hz,
Y-connected induction motor has the following parameters: R1 = 0.2
Ω R2` = 0.4 Ω X1 + X2` = 1.5 Ω The motor’s full load speed is 580
rpm. Ignore the rotational losses and calculate: a. Full load
torque b. Output power rating c. Starting current d. Starting
torque
No poles were provided
A three-phase, 2.2 kV, 60 Hz, Y-connected induction motor has the following parameters: The motor's full load speed is 580 rpm....
Q10. A three phase, 100-hp, 2400V, 6-pole, 50 Hz induction motor is tested, with the following test results obtained: No-load test (at 50 Hz) Block-rotor test (at 12.5 Hz) 420 35 11500 Signal Voltage (V) 2400 Current (A) 10 Power (W) 4200 Stator resistance is measured at 1.75 Ω per phase. a) Find the parameters of the equivalent circuit b) At a slip of 0.25, calculate the power and torque output and the efficiency of this motor. Ans. : a)...