A 16 cubic feet freezer requires removal of 105 kJ heat transfer per day to maintain...
A 16 cubic feet freezer requires removal of 105 kJ heat transfer per day to maintain its temperature at 0C.
a) Determine the minimum theoretical work input for one day of operation of the refrigeration cycle (cooling the freezer) if the heat is dumped into the ambient at temperature of 27C.
b) What is the coefficient of performance of the refrigerator if in reality its power consumption is 400 W? How does this power consumption compare with that of similar size freezers available on market?
Homework Answers
Add Answer to:
A 16 cubic feet freezer requires removal of 105 kJ heat transfer
per day to maintain...
A freezer is designed, based on vapor-compression refrigeration cycle. The designed conditions are: R-134a as refrigerant,...
A freezer is designed, based on vapor-compression refrigeration cycle. The designed conditions are: R-134a as refrigerant, with a cooling capacity of 500 kW; compressor of 70% efficiency, with a superheat of 10°C before compressor inlet; operation temperature of -10°C inside the refrigerator, with the environment temperature of 25°C outside the refrigerator; Determine the pressure range of refrigeration cycle if a 10°C difference is required to ensure effective heat transfer of evaporator and condenser; Plot the refrigeration cycle on P-h diagram;...
During winter time a heat pump is operating on a heating mode to maintain a living...
During winter time a heat pump is operating on a heating mode to maintain a living room at 23oC during which the outside temperature is -5oC. The system is using R134a as a working fluid. The refrigerant leaves the condenser at 28oC and enters a compressor at -10oC. The refrigerant flow rate is 0.12kg/s. Assume an ideal VCC to evaluate the system and report the followings: a. Process diagram b. Heating capacity kJ/hr c. Coefficient of performance of the system...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34 °C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34 °C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34°C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat transfer...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated spac...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated space at -100C. Would you recommended an evaporator pressure of 1.6 bar or 2 bar for this system? Why? -la An automotive Air conditioner using refrigerant R134a as the working fluid and operating on ideal vapor compression refrigerant cycle is to maintain a space at 24°C while operating its condenser at 1000 kPa. Determine the COP of the system when a temperature difference of 14°C is allowed...
6. An office building requires a heat transfer rate of 20 kW to maintain the inside temperature a...
6. An office building requires a heat transfer rate of 20 kW to maintain the inside temperature at 21°C when the outside temperature is 0°C. A vapor-compression heat pump with Refrigerant 134a as the working fluid is to be used to provide the necessary heating. The compressor operates adiabatically with an isentropic efficiency of 82%. Specify appropriate evaporator and condenser pressures of a cycle for this purpose assuming Δ1cond-Al evap-10°C, as shown below. The states are numbered as shown below....
1. 1. The primary energy savings in tep (1 MWh -0.086 tep) and diesel, which involves the direct use of heat from a geothermal resource to cover a heat demand of 100 kW for 3,500 h / year, assum...
1. 1. The primary energy savings in tep (1 MWh -0.086 tep) and diesel, which involves the direct use of heat from a geothermal resource to cover a heat demand of 100 kW for 3,500 h / year, assuming that this demand will be covered with diesel boiler of average yield 0.8 (for diesel 1.12 tep/ton gas oil), they are: a) 30.1 tep/year, 26.9 ton/year b) 37.6 tep/year, 33.6 ton/year c)41.2 tep/year, 36.8 ton /year 1. 2. A hydraulic pump...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34 °C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34 °C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat...
In a vapor-compression refrigeration heat pump cycle with Refrigerant 134a as the working fluid provides heating at a rate of 15 kW to maintain a building at 20 °C year-round. During the heating mode in the winter, the outside temperature is 5 °C. It is also used for cooling in the summer when outside temperature is 34°C. Saturated vapor at 2.4 bar leaves the evaporator and superheated vapor at 8 bar leaves the compressor. There is no significant heat transfer...
Refrigeration Question 1 a) A refrigerant R134a refrigerator is to maintain the refrigerated space at -100C. Would you recommended an evaporator pressure of 1.6 bar or 2 bar for this system? Why? -la An automotive Air conditioner using refrigerant R134a as the working fluid and operating on ideal vapor compression refrigerant cycle is to maintain a space at 24°C while operating its condenser at 1000 kPa. Determine the COP of the system when a temperature difference of 14°C is allowed...
6. An office building requires a heat transfer rate of 20 kW to maintain the inside temperature at 21°C when the outside temperature is 0°C. A vapor-compression heat pump with Refrigerant 134a as the working fluid is to be used to provide the necessary heating. The compressor operates adiabatically with an isentropic efficiency of 82%. Specify appropriate evaporator and condenser pressures of a cycle for this purpose assuming Δ1cond-Al evap-10°C, as shown below. The states are numbered as shown below....
1. 1. The primary energy savings in tep (1 MWh -0.086 tep) and diesel, which involves the direct use of heat from a geothermal resource to cover a heat demand of 100 kW for 3,500 h / year, assuming that this demand will be covered with diesel boiler of average yield 0.8 (for diesel 1.12 tep/ton gas oil), they are: a) 30.1 tep/year, 26.9 ton/year b) 37.6 tep/year, 33.6 ton/year c)41.2 tep/year, 36.8 ton /year 1. 2. A hydraulic pump...
Most questions answered within 3 hours.
-
choose a radioactive isotope used in healthcare or another field
and report on how your isotope...
asked 8 seconds from now -
(20
10Ne) (72 37Rb) (16 8O) (11 5B) why isotope of Rb is most unstable?
is...
asked 4 minutes ago -
A resistor and capacitor are connected in series to a power
supply of 50 Volts. The...
asked 8 minutes ago -
A firm will pay a dividend of $2.01 next year. The dividend is
expected to grow...
asked 12 minutes ago -
The Bureau of Labor Statistics divides the adult population into
four categories: employed, underemployed, unemployed, and...
asked 25 minutes ago -
describe
three ways that industrialized agriculture can impact human
health?
asked 13 minutes ago -
Question 29 Which of the following is not needed in order to
prepare a statement of...
asked 27 minutes ago -
iodination of vanillin
experiment
1. Briefly explain why the
iodination took place at the indicated position...
asked 41 minutes ago -
Hello, I have questions on Matlab. Let's say that I have an
equation. Signal x(t)= cos(2*pi*10*t)...
asked 38 minutes ago -
Fermentation carried out by year cells will produce
1. glucos
2. ethanol
3. phsophoglyceraldehyde
4. 36...
asked 38 minutes ago -
create a class in Java for a Plane
the class will include
String Data Fields for...
asked 40 minutes ago -
A jewellery material consists of 92.5 wt% of Au and 7.5 wt% of
Cu forming a...
asked 45 minutes ago