Design the circuit with a 3-to-8 decoder and external OR gates. 8 Assume we want to...
2. Make an 8-to-1 multiplexer with a 3-to-8 decoder and two groups of 8 AND gates each, plus an OR gate. The 3-to-8 decoder must be done with hierarchical design and several AND gates. You are strongly advised to use Logic Works 5 or similar circuit design software to create circuit diagrams for this question. For hierarchical design, you can draw over the exported circuit diagram to outline smaller hierarchical parts
2. Using one decoder and external gates, design the combinational circuit that implements all the following three Boolean functions of the system
JUAL Urade: Q: [10 marks, CLO: 04] Using a decoder and external gates, design the combinational circuit defined by the following three Boolean functions: F, =x'y'z' +xz , F;=xy'z'+x'y , F;=x'y'z +xy
We are interested in designing a circuit that implements the following three Boolean functions: 3. h(x,y,z)=Σm(1,4,6) f1x,y,z)- > m(1,4,6) y-m35) (x,y, z) Σ m (2,4,6,7) 左 You are supposed to implement the circuit with a decoder constructed with NAND gates (a) [12pt] Start by drawing the block diagram of a NAND-based decoder with three inputs (x,y,z), labelling all the outputs with their corresponding Boolean functions (b) [8pt) Using a new block diagram of the NAND-based decoder, implement the circuit using...
Design 3- to – 8 decoder using logic gates with enabler, AND, NOT, etc..? Design 3- to – 8 decoder using only two 2-to-4 decoders graphical blocks, use enabler input? a) Design a 3-bit ripple-carry adder using AND, OR, NOT, EXOR, etc.; include carry-in (Cin), carry-out (Cout) and overflow input/output signals? Note: Design for 1-bit first, then extrapolate to 4-bit using 1-bit full-adder graphical block. Design a 3-bit ripple-carry subtractor using AND, OR, NOT, EXOR, etc..; include carry-in (Cin), carry-out...
Q31 For the figure shown below W is an input, (X, Y and Z) are connected to (S2, S and So), find the Boolean function F (W, X, Y, Z) in SOP and implement it use: 1. Multiplexer: One-piece (4 to 1) and external gates (W, X are selectors). 2. Decoder: Five (2 to 4) with AND gate. 0 1 8 to 1 MUX Do D, F OP D, S S S 35 Marks] X Y Z Q31 For the...
2. (20) A combinational circuit is defined by the following four Booelan functions Fi = XYZ + XYZ + XYZ F2 = XYZ+YZ F3 = Y Z + XY F= XY + XYZ Design the circuit with decoder and external OR gates. Hint. Please use 3-8 decoder
Design the circuit for f(A,B,C,D)=ΠM(0,1,4,7,8,12-15),d(2,3,10) using a minimal number of 3-to-8 line decoders and NAND gates (any size). Decoder outputs must be active-low. Also, assume that the decoder has one active-high enable line G0. If you need NOT gates, you must show them in the diagram using NAND gates.
Computer architecture Having the next Boolean functions: F1(x,y,z)-П (1, 3, 5) . F2(x,y,z)-Σ (0, 2, 4, 5) . 1. Make one logic gate design circuit, using AND, OR and NOT logic gates (20 points). 2. Design two 4-to-1 selectors, one for each Boolean function (20 points) 3. Design one 3-to-8 decoder to solve both Boolean functions (20 points) 4. Design a 8x2 ROM to solve both Boolean functions (20 points) 5. Design a 3x5x2 PLA to solve both Boolean functions...
Design a four-bit combinational circuit 2'scomplementer. (The output generates the 2's complement of the input binary number.) Construct a 5-to-32-line decoder with enable by using 3-to-8 and 2-to-4-line decoders with enables For the decimal-to-BCD encoder given in the text (Slide 33 of chapter 5), assume by error that the 6 input and the 3 input are both HIGH. What is the output code? Is it a valid BCD code? Construct a 16 times 1 multiplexer with 4 times 1 multiplexers....