Homework Answers
Request Answer!
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
Add Answer to:
A. For the system given in Figure A, find ) The equivalent impedance (Z) 2) The...
Figure 2 shows a one-line diagram of a small 440-V industrial distribution system. The power system...
Figure 2 shows a one-line diagram of a small 440-V industrial distribution system. The power system supplies a constant line voltage of 440-V, and the impedance of the distribution lines is negligible. Load is a Δ-connected load with a phase impedance of 20L45°Ω, and load 2 is a Y-connected load with a phase impedance of 101-200Ω (a) Find the overall power factor of the distribution system (b) Find the total line current supplied to the distribution systenm Bus A LoadDelta...
Problem 1 A 3-phase, Y/Y system is supplied from a 450 V (line). The load impedance...
Problem 1 A 3-phase, Y/Y system is supplied from a 450 V (line). The load impedance is 6tj 10 Ω/phase. Please do the following a) Draw the single-phase equivalent circuit of phase A b) Find the magnitude of all line and phase currents c) Find the real power delivered to the load d) Find the reactive power delivered to the load e) Find the apparent power delivered to the load f) Find the power factor of the load
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is...
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is 0.09 + j0.16 . Load 1 is Y connected, with a phase impedance of 2.5236.87° 0 and load 2 is A connected, with a phase impedance of 54-20° n. shows a three-phase power system with two loads. The A-connected 2 0.09 j0.16 n w Vca= 4802-240° V + Vab = 48020 V Vhc = 480-120° V 0.09 j0.16 0.09 j0.16 Load 1 Load 2...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below. T1 T2 V. 1 2 vm 9 Line G M Figure 2 One-line diagram for problem 2 G: T1: 60 MVA 50 MVA 50 MVA T2: Line: M: 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j200 12 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base. Choose...
1SL 1. (30%). A single-phase source is applied to a two terminal passive circuit with equivalent...
1SL 1. (30%). A single-phase source is applied to a two terminal passive circuit with equivalent impedance Z = 12/6: measured from the terminals. The reactive power delivered by the source is Q=-32/v2 Mvar and the power factor is p.f.=1/V2 leading, the source current is i(t) = 4v2 cos (120-t) kA. (a) Determine the complex power and the apparent power delivered by the source (b) Draw the power triangle. A (e) Determine the load impedance Z = 2/6, bel/bz 20
A 400-MVA, 200-kV/20-kV, three phase Y-Y transformer has an equivalent series impedance of ZTL = 0.012...
A 400-MVA, 200-kV/20-kV, three phase Y-Y transformer has an equivalent series impedance of ZTL = 0.012 + 20.0162 per phase referred to the low-voltage side (secondary side). The transformer is supplying a three-phase load of 300-MVA, 0.8 power factor lagging at terminal voltage of 20 kV (line-to-line) on its low-voltage side (secondary side) as shown in Fig. 22. The primary is supplied from a transmission line with an impedance of ZL = 0.5 + j1.0 per phase. The line-to-neutral load...
INTRODUCTION TO POWER SYSTEM
1. The one-line diagram of a three-pha se power system is shown in Figure 3.29. Select a common base of 100 MVA and 15 kV on the motor side. Draw an impedance diagram with all impedances including the load impedance marked in per-unit. The manufacturer's data for each device is given as follow:The three-phase load at bus 4 absorbs 57 MVA, 0.6 power factor lagging at 10.45 kV. Line 1 and line 2 have reactances of 48.4 Ω and 65.43...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below T2 2 Line Vm G M 1 BA Figure 2 One-line diagram for problem 2 G: Ti: T2: Line: M: 60 MVA 50 MVA 50 MVA 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j2002 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base. Choose 20 kV as...
2 - The three-phase power and line-line ratings of the electric power system shown in Figure...
2 - The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below. Ti T2 VA Line 2 G M Vm BE BE Figure 2 One-line diagram for problem 2 G: T: T2: Line: M: 60 MVA 50 MVA 50 MVA 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j2002 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base....
A three-phase line, which has an impedance of (2 + j4) Ω per phase, feeds two...
A three-phase line, which has an impedance of (2 + j4) Ω per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y- connected with an impedance of (30 + j40) Ω per phase, and the other is delta- connected with an impedance of (60 + j45) Ω per phase. The line is energized at the sending end from a 60-Hz, three phase, balanced voltage source of 120√3 V (rms, line- to-line). Determine...
Figure 2 shows a one-line diagram of a small 440-V industrial distribution system. The power system supplies a constant line voltage of 440-V, and the impedance of the distribution lines is negligible. Load is a Δ-connected load with a phase impedance of 20L45°Ω, and load 2 is a Y-connected load with a phase impedance of 101-200Ω (a) Find the overall power factor of the distribution system (b) Find the total line current supplied to the distribution systenm Bus A LoadDelta...
Problem 1 A 3-phase, Y/Y system is supplied from a 450 V (line). The load impedance is 6tj 10 Ω/phase. Please do the following a) Draw the single-phase equivalent circuit of phase A b) Find the magnitude of all line and phase currents c) Find the real power delivered to the load d) Find the reactive power delivered to the load e) Find the apparent power delivered to the load f) Find the power factor of the load
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is 0.09 + j0.16 . Load 1 is Y connected, with a phase impedance of 2.5236.87° 0 and load 2 is A connected, with a phase impedance of 54-20° n. shows a three-phase power system with two loads. The A-connected 2 0.09 j0.16 n w Vca= 4802-240° V + Vab = 48020 V Vhc = 480-120° V 0.09 j0.16 0.09 j0.16 Load 1 Load 2...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below. T1 T2 V. 1 2 vm 9 Line G M Figure 2 One-line diagram for problem 2 G: T1: 60 MVA 50 MVA 50 MVA T2: Line: M: 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j200 12 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base. Choose...
1SL 1. (30%). A single-phase source is applied to a two terminal passive circuit with equivalent impedance Z = 12/6: measured from the terminals. The reactive power delivered by the source is Q=-32/v2 Mvar and the power factor is p.f.=1/V2 leading, the source current is i(t) = 4v2 cos (120-t) kA. (a) Determine the complex power and the apparent power delivered by the source (b) Draw the power triangle. A (e) Determine the load impedance Z = 2/6, bel/bz 20
A 400-MVA, 200-kV/20-kV, three phase Y-Y transformer has an equivalent series impedance of ZTL = 0.012 + 20.0162 per phase referred to the low-voltage side (secondary side). The transformer is supplying a three-phase load of 300-MVA, 0.8 power factor lagging at terminal voltage of 20 kV (line-to-line) on its low-voltage side (secondary side) as shown in Fig. 22. The primary is supplied from a transmission line with an impedance of ZL = 0.5 + j1.0 per phase. The line-to-neutral load...
The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below T2 2 Line Vm G M 1 BA Figure 2 One-line diagram for problem 2 G: Ti: T2: Line: M: 60 MVA 50 MVA 50 MVA 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j2002 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base. Choose 20 kV as...
2 - The three-phase power and line-line ratings of the electric power system shown in Figure 2 are given below. Ti T2 VA Line 2 G M Vm BE BE Figure 2 One-line diagram for problem 2 G: T: T2: Line: M: 60 MVA 50 MVA 50 MVA 20 kV 20/200 kV 200/20 kV 200 kV 18 kV X=9% X=10% X=10% Z=120+j2002 X=8% 43.2 MVA (a) Draw an impedance diagram showing all impedances in per unit on a 100-MVA base....
Most questions answered within 3 hours.
-
After watching the lectures I am still having a hard time
understanding these equations.
1. The...
asked 1 hour ago -
Testing:
H0:μ=56.9
H1:μ<56.9
Your sample consists of 23 subjects, with a mean of 56.3 and
standard...
asked 1 hour ago -
straight wire, labeled as Wire A, lies horizontally on a
tabletop and is oriented to run...
asked 1 hour ago -
For a Chi-Squared Goodness of Fit Test about a uniform
distribution, complete the table.
Round to...
asked 1 hour ago -
Milk of magnesia is only slightly soluble in water. Kc for the
reaction Mg(OHs)(s)>Mg2+(a) + 2OH-1(aq)...
asked 1 hour ago -
Excel's HYPGEOM.DIST function can be used to compute _____.
a. both hypergeometric probabilities and cumulative
hypergeometric...
asked 1 hour ago -
The rocket used for the human lunar missions was the Saturn V
rocket. At liftoff the...
asked 1 hour ago -
1. The East Street Bagel Shop has a weekly demand for 3,500
bagels, which they make...
asked 1 hour ago -
paraphrasing each paragraph
“Where two or more persons knowingly act together unlawfully,
the act of each...
asked 1 hour ago -
The lateral line system in fish is contained which of the
following?
chemoreceptors
photoreceptors
mechanoreceptors
odor...
asked 1 hour ago -
Find the y-intercept of y =-5 x. The y-intercept of y equals
negative 5 x is______...
asked 1 hour ago -
Customers arrive randomly at a gas station at the average rate
of 30 per hour, while...
asked 1 hour ago