Homework Answers
Add Answer to:
Problem 1 A 3-phase, Y/Y system is supplied from a 450 V (line). The load impedance...
A balanced Y-connected load with a phase impedance of 10 + j 4 Ω is supplied...
A balanced Y-connected load with a phase impedance of 10 + j 4 Ω is supplied by a balanced, positive sequence Δ-connected voltage source having Vab 208∠0o V. Given that the line impedance is 0.8 + j 0.3 Ω per phase. (i) Construct a single-phase equivalent circuit of the three-phase system. (ii) Calculate the phase currents of the load. (iii) Calculate the line voltages at the load.
A three-phase line, which has an impedance of (2 + j4) Ω per phase, feeds two...
A three-phase line, which has an impedance of (2 + j4) Ω per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y- connected with an impedance of (30 + j40) Ω per phase, and the other is delta- connected with an impedance of (60 + j45) Ω per phase. The line is energized at the sending end from a 60-Hz, three phase, balanced voltage source of 120√3 V (rms, line- to-line). Determine...
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is...
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is 0.09 + j0.16 . Load 1 is Y connected, with a phase impedance of 2.5236.87° 0 and load 2 is A connected, with a phase impedance of 54-20° n. shows a three-phase power system with two loads. The A-connected 2 0.09 j0.16 n w Vca= 4802-240° V + Vab = 48020 V Vhc = 480-120° V 0.09 j0.16 0.09 j0.16 Load 1 Load 2...
Question: A three-phase line has an impedance of 1 + j2 Ω per phase. The line...
Question: A three-phase line has an impedance of 1 + j2 Ω per phase. The line feeds two balanced three-phase loads that are connected in parallel. The first load is Y-connected and has an impedance of 20+j40 Ω per phase. The second load is ∆-connected and has an impedance of 30-j60 Ω per phase. The line-to-line voltage at the load end of the line is 415V. Taking the phase voltage Va as reference, determine: a) The total current per phase...
The impedance of a three-phase line is 0.3 + j 2.4 per phase. The line feeds...
The impedance of a three-phase line is 0.3 + j 2.4 per phase. The line feeds two balanced three- phase loads connected in parallel. The first load takes 600 kVA at 0.7 p.f. lagging. The second takes 150 kW at unity power factor. The line to line voltage at the load end of the line is 3810.5 V. Find a) The magnitude of the line voltage at the source end of the line. b) The total active and reactive power...
Problem5 A balanced Y-Y four-wire system has phase voltages Van-1 10L0。V, Vbn-1104200 V, Ven 1102-1200 V....
Problem5 A balanced Y-Y four-wire system has phase voltages Van-1 10L0。V, Vbn-1104200 V, Ven 1102-1200 V. The load impedance per phase is 19 +j13 2, and the line impedance per phase is 1+,2 Ω. a) Construct the a-phase equivalent circuit of the system. b) Calculate the line currents and neutral current. c) Calculate the three phase voltages at the load VAN, VBN and Vcv d) Calculate the average power per phase delivered to the Y- connected load
A balanced A-connected load of Z,=12+39.0 12 is connected to a power supply via a transmission...
A balanced A-connected load of Z,=12+39.0 12 is connected to a power supply via a transmission line with impedance of Zrl=0.6+j2.5 12, find Transmission Lines o 20820 V AC 2084(0–240°) v umaza 10 AC 2084(0-120°) v mm | za | Three-Phase 208 V, 60 HZ Power Supply Three-Phase A-Connected Balanced Load @@OGO E the load line and phase voltages (magnitude and angle), the load line and phase currents (magnitude and angle), the total load's real, reactive, and apparent powers, the...
Consider the following single phase circuit (one-line diagram): a) Calculate and draw the equival...
Consider the following single phase circuit (one-line diagram): a) Calculate and draw the equivalent per unit circuit b) What is the voltage at the load (actual)? :208 208: 1 Load Ziad 0.082 130.082 Ω c) Calculate the apparent power, active power, reactive power (actual values) at the load d) What is the power factor at the load?
Consider the following single phase circuit (one-line diagram): a) Calculate and draw the equivalent per unit circuit b) What is the voltage at...
A balanced three-phase source with a 208 V rms (line-to-line) is delivering power to a balanced...
A balanced three-phase source with a 208 V rms (line-to-line) is delivering power to a balanced Y-connected load with phase impedance Z1 = 4 + j 3 Ohms in parallel with a balanced delta-connected load with phase impedance Z2 = 7.5 + j 6 Ohms. Calculate the active (real) and reactive (imaginary) powers delivered by the source. Draw the power triangle. What is the power factor of the combined load?
2. A load is connected to a voltage of 1320 volts at 60 Hz. The load...
2. A load is connected to a voltage of 1320 volts at 60 Hz. The load dissipates 100 kW with a 0.867 power factor. Specify the capacitance needed to correct the power factor to being 1. 3. Consider a circuit for a single-phase AC power system, where a 200 volt AC voltage source is delivering power to a loads. Find the true power, reactive power and apparent power delivered by 150 mA current (Impedance phase angle 0 = 30°) 3....
1) Figure- generator is producing a line voltage of 480 V, and the line impedance is 0.09 + j0.16 . Load 1 is Y connected, with a phase impedance of 2.5236.87° 0 and load 2 is A connected, with a phase impedance of 54-20° n. shows a three-phase power system with two loads. The A-connected 2 0.09 j0.16 n w Vca= 4802-240° V + Vab = 48020 V Vhc = 480-120° V 0.09 j0.16 0.09 j0.16 Load 1 Load 2...
Problem5 A balanced Y-Y four-wire system has phase voltages Van-1 10L0。V, Vbn-1104200 V, Ven 1102-1200 V. The load impedance per phase is 19 +j13 2, and the line impedance per phase is 1+,2 Ω. a) Construct the a-phase equivalent circuit of the system. b) Calculate the line currents and neutral current. c) Calculate the three phase voltages at the load VAN, VBN and Vcv d) Calculate the average power per phase delivered to the Y- connected load
A balanced A-connected load of Z,=12+39.0 12 is connected to a power supply via a transmission line with impedance of Zrl=0.6+j2.5 12, find Transmission Lines o 20820 V AC 2084(0–240°) v umaza 10 AC 2084(0-120°) v mm | za | Three-Phase 208 V, 60 HZ Power Supply Three-Phase A-Connected Balanced Load @@OGO E the load line and phase voltages (magnitude and angle), the load line and phase currents (magnitude and angle), the total load's real, reactive, and apparent powers, the...
Consider the following single phase circuit (one-line diagram): a) Calculate and draw the equivalent per unit circuit b) What is the voltage at the load (actual)? :208 208: 1 Load Ziad 0.082 130.082 Ω c) Calculate the apparent power, active power, reactive power (actual values) at the load d) What is the power factor at the load?
Consider the following single phase circuit (one-line diagram): a) Calculate and draw the equivalent per unit circuit b) What is the voltage at...
2. A load is connected to a voltage of 1320 volts at 60 Hz. The load dissipates 100 kW with a 0.867 power factor. Specify the capacitance needed to correct the power factor to being 1. 3. Consider a circuit for a single-phase AC power system, where a 200 volt AC voltage source is delivering power to a loads. Find the true power, reactive power and apparent power delivered by 150 mA current (Impedance phase angle 0 = 30°) 3....
Most questions answered within 3 hours.
-
Write a java program that declares 10 element array (of type
integers), creates and initializes the...
asked 2 minutes ago -
A $1000 par value convertible bond has a conversion price of
$25. It is currently selling...
asked 5 minutes ago -
import java.util.Arrays;
import java.util.Random;
import java.util.Scanner;
/**
* TODO Write a summary of the role of...
asked 8 minutes ago -
Sodium hydroxide is a strong base and ammonium hydroxide is a
weak base. Which of the...
asked 13 minutes ago -
Glycerol, C3H8O3, is a substance used extensively in the
manufacture of cosmetics, foodstuffs, antifreeze, and plastics....
asked 16 minutes ago -
After moving through Chapter 1 of our textbook, what is a social
issue/area of concern that...
asked 16 minutes ago -
Please complete the implementation of the four functions IN
C.
//************************************************************************************/
//
// countNumberofOnes
//
//...
asked 37 minutes ago -
A memory test consists of 35 tasks. Each task is graded on a
scale of 1...
asked 17 minutes ago -
Construction Cost Analysis and Estimating:
A project requires 17,000 allowed hours. Location of the work is...
asked 26 minutes ago -
1: In 802.11b, Access Point (AP) delivers a nonce to the Station
(STA). This nonce is...
asked 27 minutes ago -
calculate change in entropy and change in enthalpy for freezing
1 mol of water at -10C...
asked 33 minutes ago -
In your opinion, did anyone "win" the Cold War? If no, why? If
yes, who won...
asked 37 minutes ago