Determine the current through each resister in the circuit diagram shown (see pic)
I at 100 ohms ---- ?
I at 200 ohms ---- ?
I at 250 ohms ---- ?
I at 350 ohms ---- ?
Here is the answer
R1 and R2 are prallel with equivalent resistance =71.42 ohm
R3 and R4 are prallel with equivalent resistance =127.27 ohm
Total Req=198.69 ohm
current=24/198.69=0.120 A
Current through R1=0.120*(250/350)=0.086 A
Current through R2=0.120*(100/350)=0.034 A
Current through R3=0.120*(200/550)=0.0436 A
Current through R4=0.120*(250/350)=0.076 A
Generally current through a parallel branch=I total*opposite resistance branch/total resistance
I1=V/R1=24/100 =0.24 amps
I2=v/R2=24/200 =0.12 amps
I3=v/R3=24/250 =0.096 amps
I4=v/R4=24/350 =0.0685 amps
Determine the current through each resister in the circuit diagram shown (see pic) I at 100...
Giving the DC-circuit with DC voltage of 100 and all the resister are 1 K-ohms (1000). Write the equations of KCL and KVL that solve the current in each loop. Solve for All currents at point A Show that power is conserved from source to each resister. Write the equivalent Resister at B.
SOLVE BY USING MATLAB 6. For the sequential circuit shown in Figure, the current flowing through the inductor is zero. At t = 0, the switch moved from position a to b, where it remained for 1 s. After the 1 s delay, the switch moved from position b to position c, where it remained indefinitely. Sketch (plot) the current flowing through the inductor versus time. 50 Ohms / 200 H mm M + 40V 150 Ohms 350 Ohms 1
For the circuit shown below, find the magnitude and the direction of the current through each resistor and the power supplied by each battery, using the following values: R1=4.53 ohms, R2=6.63 ohms, R3=8.94 ohms, R4=8.17 ohms, R5=3.78 ohms, R6=17.8 ohms, R7=5.12 ohms, Vemf1=7.22 V, Vemf2=11.6V. Answers have to be in the form of this Please show all work and explain. Thank you R3 Rs Vernf,l emf,I Rs R. WA emf 2
Assume DC bias current through the resister in parallel with the DC bias current source is negligible. Vcc = 15V R1 100k RC 800 C2 1E-5 Rsig C1 100 1E-5 R2 50k RE 400 Vin 4k Note: This circuit is the same common emitter circuit seen in HW18 and HW19 The internal capacitances are CBE = CBCT 10-12 F. You can assume that CCE is zero. a) Approximately, determine the poles associated with each internal capacitor. Use the Miller Theorem...
Problem # 3 Determine the voltage drop and the current through each resistor in a circuit composed of three resistors (5, 10 and 20 ohms) connected in parallel with a 12 V voltage source.
For the circuit shown in the figure find the current through each resistor. For the circuit shown in the figure find the potential difference across each resistor.
Calculate the current, I, through the batteries for: - a 2-bulb parallel circuit - How does the total circuit conpare to the current through each bulb? -a 3-bulb parallel circuit? GIVEN THAT: The bulbs used are rated at 0.30Amps, 2.5 Volts, and 8.33 ohms. Would the answer be .3Amps for any of the parallel circuits?
Determine the current through R3=50Ω in the circuit shown in (Figure 1), where vs=60V, R1=30Ω, R2=30Ω, and R4=60Ω. Express your answer in amperes to three significant figures. I need both parts A and B please ▼ Part B Determine the current through R3-50 Ω in the circuit shown in Figure 1), where us Rs 60 S2 Express your answer in amperes to three significant figures. Review 60 V. R-30 Ω. R2 30 Ω, and Learning Goal: To determine the voltage,...
7. Th e-current characteristics curve for the diode in the circuit is shown in the graph termine the operating current through the diode for the circuit. A. 40 mA B. 60 mA C. 15 mA D. 25 mA E. 0 mA 350 Ω 200 Ω 12V mA 100 50 10
QUESTION 8 For the circuit shown below, what is the current through the 200 Q resistor, in units of amperes? give the answer as a positive value 2 points Save Answer 尺 50Ω 1002 10v 40V R's 2000 2 points QUESTION 9 A student has to calculate the currents in the circuit shown in the diagram. After he chooses the current the following is a correct equation for this loop? ts in the circuit shown in the diagram. After he...