What is the height difference h between two pipes in the figure for Question 1?
What is the height difference h between two pipes in the figure for Question 1? Question...
A mercury manometer is used to measure the pressure difference
in the two pipes shown in the figure. A type of oil (specific
weight 45.6 lb/ft3 ) is flowing in A and a different type of oil
(specific weight 56.0 lb/ft3 ) is flowing in B. An air pocket has
formed as shown. What is the pressure in A if the pressure in B is
18.3 psi?
Air bubble 3 in. 5 in. Fuel oil 18 in. SAE 30 oil...
he
inverted U-tube manometer is used to measure the difference in
pressure between water flowing in the pipes at A and B. If the top
segment is filled with oil for sp.gr = 0.83, and the water levels
in each segment are as
indicated. Determine
the gage pressures at pipes A and Bif
(PB = 1.35xPA) kPa
225 mm 300 mm 150 mm
Question 1: Calculate the flow in each member of the pipe network shown in Figure 2.4 and also the presure difference in N/m' between C and iE. Data for the individual pipes is given in the table below. 360 Ve 300 V E 600 V 460 Va 100 Vs Figure 2.4 UET Pipe Length (m) Diameter (mm)Friction coefficient (l) 530 0.020 460 BC700 530 0.020 CD 610 600 0.022 DE601 600 0.018 EA 150 450 0.018 Hint: Assume initially that...
Question 2 Figure 2: Flow between two inclined plates Consider a two-dimensional plates, as shown in figure 2. Assume that pressure increases 30°. Acceleration due t o Pa and the channel height is h 10 cm inclined at te the velocity profile of the flow. State your assumptions and show your work. onal Newtonian, steady state, incompressible flow of a fluid be- by 1 kPa/ a dynamic viscosity of H1-1 x 10 amic viscosity of uo wall towards the right....
Two reservoirs are joined by three pipes in series; Pipe 1 is 300 mm in diameter and 300 m long and has λ = 0.019; Pipe 2 is 200 mm in diameter, 150 m long and has λ = 0.021; and Pipe 3 is 250 mm in diameter and 250 m long and has λ = 0.020. They are conveying water at 15oC. If the height difference between the top water levels is 10 m, find the flow rate ignoring...
4. Figure 2 shows two reservoirs which are connected by three pipes of different diameters. The length and diameter of each pipe are given in Table 1. The flow rate in the pipeline is 55 Ls. The entrance and exit from the pipes are sharp and the change between the pipelines in the cross sections is sudden. Assume the friction factor, /for the pipes as 0.01. (a) Analyse all the head losses which occur, giving an expression for each. (7...
The system below shows a simplified schematic of an oil transfer system between tanks, from left to right: L L The oil specific gravity is 0.77 and its viscosity is 2.7 [cP). The pipes are horizontal and coaxial (neglect difference in height between suction and discharge). The tanks are closed but vented so that they are at atmospheric pressure ([atm]). Assume for simplicity that the liquid level in each tank is 2.5 (m) above the level of the pipes (in...
How
it's solved
A viscous fluid is flowing through two different horizontal pipes. The pressure difference Δp between the ends of each pipe is the same. The pipes have the same radius but different length as shown. The relation between the flow rate through the pipes is B) QA-QB 2L
7 . Determine the differential height h of the mercury column if the gage pressure of the air in the tank shown in is measured to be 80 kPa (Non-anonymous question ) (6 Points) 80 Kpa -Oil SG =.81 60 cm Air -Water 30 cm -Mercury SG -14
a. estimate the mean difference
in height between boys and girls with a 95% confidence
b. does this interval support the given claim
At age 9, the average weight (21.3 kg) and the average height (124.5 cm) for both boys and girls are exactly the same. A random sample of 9-year-olds yielded these results. Boys Girls Sample size Mean height, cm Population variance Source: www.healthepic.com 50 123.8 98 50 122.8 120 Use u 1 for the average height for boys....