Homework Answers
Add Answer to:
COURSE CE 3202 - Design of Concrete Structures SUBJECT HOMEWORK 4 DATE LECTURE # HW 4-2...
Figure 2 shows a simply supported beam and the cross section at mid span. The beam...
Figure 2 shows a simply supported beam and the cross section at mid span. The beam supports a uniform service (unfactored) dead load consisting of its own weight plus 1.4 kips/ft and a uniform service (unfactored) live load of 1.5 kips/ft. The concrete strength is 3500 psi, and the yield strength of the reinforcement is 60,000 psi. The concrete is normal-weight concrete. For the midspan section shown in Figure 2, compute фМп and show that it exceeds Mu. WD 1.4...
HW 3-1 6-9 The beam shown in Fig. P6-9 supports the unfactored D 1.4 kips/f L...
HW 3-1 6-9 The beam shown in Fig. P6-9 supports the unfactored D 1.4 kips/f L -1.5 kips/ft loads shown. The dead load includes the weight o the beam. (a) Draw shearing-force diagrams for 25 ft factored dead and live load on the entire beam; Fig. P6-9 (b) Design stirrups. Use f 4500 psi and No. 3 40,000 psi. double-leg stirrups with f 36 14* 12-
. Deisgn a reinforced concrete cross-section with unknown dimensions Problem 1 Design the steel reinforcement for...
. Deisgn a reinforced concrete cross-section with unknown dimensions Problem 1 Design the steel reinforcement for the beam shown in Figure 1 that supports its own self-weight, a uninformly distributed dead load, a uniformly distributed live load, and a live point load located at midspan. In your solution, you should select the area of reinforcement, the number and size of reinforcing bars, and the section depth in order to receive full credit. Assume J 5,000 psi, fy 60,000 psi. 16...
The T-beam shown in Figure 1 supports the un-factored dead load of 1.4 kips/ft and live...
The T-beam shown in Figure 1 supports the un-factored dead load
of 1.4 kips/ft and live load of 1.5 kips/ft. The dead load does not
include the self-weight of the beam. The material properties are as
follows: fc’=3000 psi; fy=60,000 psi. Design the shear
reinforcement (stirrups). Plot the stirrups distribution along the
span of the beam.
DL= 1.4 kips/ft ; L2=1.5 kips/Ft * 75 Sz=7 X * b=3616. hr-6in k ) انا امه hw-lain + * bw=12 in
Concrete design Problem #1: Design a rectangular beam section, i.e. select b, d, h, and the...
Concrete design
Problem #1: Design a rectangular beam section, i.e. select b, d, h, and the required area of tension steel, A, at mid-span for a 22 ft-span simply supported beam that support its own weight, a superimposed service dead load of 1.25 kip/ft, and a uniform service live load of 2 kip/ft. Start by assuming the self-weight of the beam W-410 lbs/ft, b-0.7d, and use fc4500 psi and fy-60, 000 psi Note: Provide a detailed sketch for the final...
Name: Date: Part II: Numerical responses 1. (+35) Design a rectangular reinforced concrete beam (tension steel...
Name: Date: Part II: Numerical responses 1. (+35) Design a rectangular reinforced concrete beam (tension steel only) for a simply span of 30 ft. Uniform service loads are 2 kips/ft dead load (included the beam weight) and 3.0 kips/ft live load. The beam is to be not exceed 16 inch wide due to column size. Use fe'=4000psi and fy 60000psi. Sketch your design and calculate Mn for the beam you design. Note: this is an open-end design for you to...
Help me with part D please! Show work and units! SE 1 -Homework 2.1 HW 2.1-3...
Help me with part D please!
Show work and units!
SE 1 -Homework 2.1 HW 2.1-3 due Thursday, December 4, 2018 1) You have a bookshelf that is 8 ft long and 1 ft deep, as shown in Figure 1. You can also see in Figure 1 that your cat, Timmy Shenko, is sitting exactly in the middle of the shelf. The shelf is made of wood (E1,500 ksi, ultimate strength 4,000 psi) and can be considered a simply- supported...
Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc = 4,000 psi,...
Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc = 4,000 psi, and steel Grade 60 (fy = 60,000 psi). For design loads assume dead load wd = 30 lb/ft? (excluding self-weight) and live load we = 100 lb/ft. Finally assume that the steel percentage ratio is equal to p= 0.18fc/fy. Design an interior one-way simply supported slab with a 15 ft span using the above assumptions. Show sketches of one-way slab cross section, including reinforcing...
Problem 3 Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc =...
Problem 3 Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc = 4,000 psi, and steel Grade 60 (fy = 60,000 psi). For design loads assume dead load wd = 30 lb/ft? (excluding self-weight) and live load wų = 100 lb/ft. Finally assume that the steel percentage ratio is equal to p= 0.18fc'/fy. Design an interior one-way simply supported slab with a 15 ft span using the above assumptions. Show sketches of one-way slab cross section,...
A beam having b=12in, d=21.5in and h=24in is reinforced with three No.11 (No.36) bars. Material strengths...
A beam having b=12in, d=21.5in and h=24in is reinforced with three No.11 (No.36) bars. Material strengths are fy=60,000 psi and fc'=4,000 psi. It is used on a 28 ft simple span to carry a total service load of 2430 lb/ft. For this memeber the sustainted loads include self-weight of the beam plus additional superimposed dead load of 510 lb/ft, plus 400 lb/ft representing that part of the live load that acts more or less continuously, such as furniture, equipment, and...
Figure 2 shows a simply supported beam and the cross section at mid span. The beam supports a uniform service (unfactored) dead load consisting of its own weight plus 1.4 kips/ft and a uniform service (unfactored) live load of 1.5 kips/ft. The concrete strength is 3500 psi, and the yield strength of the reinforcement is 60,000 psi. The concrete is normal-weight concrete. For the midspan section shown in Figure 2, compute фМп and show that it exceeds Mu. WD 1.4...
HW 3-1 6-9 The beam shown in Fig. P6-9 supports the unfactored D 1.4 kips/f L -1.5 kips/ft loads shown. The dead load includes the weight o the beam. (a) Draw shearing-force diagrams for 25 ft factored dead and live load on the entire beam; Fig. P6-9 (b) Design stirrups. Use f 4500 psi and No. 3 40,000 psi. double-leg stirrups with f 36 14* 12-
. Deisgn a reinforced concrete cross-section with unknown dimensions Problem 1 Design the steel reinforcement for the beam shown in Figure 1 that supports its own self-weight, a uninformly distributed dead load, a uniformly distributed live load, and a live point load located at midspan. In your solution, you should select the area of reinforcement, the number and size of reinforcing bars, and the section depth in order to receive full credit. Assume J 5,000 psi, fy 60,000 psi. 16...
The T-beam shown in Figure 1 supports the un-factored dead load
of 1.4 kips/ft and live load of 1.5 kips/ft. The dead load does not
include the self-weight of the beam. The material properties are as
follows: fc’=3000 psi; fy=60,000 psi. Design the shear
reinforcement (stirrups). Plot the stirrups distribution along the
span of the beam.
DL= 1.4 kips/ft ; L2=1.5 kips/Ft * 75 Sz=7 X * b=3616. hr-6in k ) انا امه hw-lain + * bw=12 in
Concrete design
Problem #1: Design a rectangular beam section, i.e. select b, d, h, and the required area of tension steel, A, at mid-span for a 22 ft-span simply supported beam that support its own weight, a superimposed service dead load of 1.25 kip/ft, and a uniform service live load of 2 kip/ft. Start by assuming the self-weight of the beam W-410 lbs/ft, b-0.7d, and use fc4500 psi and fy-60, 000 psi Note: Provide a detailed sketch for the final...
Name: Date: Part II: Numerical responses 1. (+35) Design a rectangular reinforced concrete beam (tension steel only) for a simply span of 30 ft. Uniform service loads are 2 kips/ft dead load (included the beam weight) and 3.0 kips/ft live load. The beam is to be not exceed 16 inch wide due to column size. Use fe'=4000psi and fy 60000psi. Sketch your design and calculate Mn for the beam you design. Note: this is an open-end design for you to...
Help me with part D please!
Show work and units!
SE 1 -Homework 2.1 HW 2.1-3 due Thursday, December 4, 2018 1) You have a bookshelf that is 8 ft long and 1 ft deep, as shown in Figure 1. You can also see in Figure 1 that your cat, Timmy Shenko, is sitting exactly in the middle of the shelf. The shelf is made of wood (E1,500 ksi, ultimate strength 4,000 psi) and can be considered a simply- supported...
Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc = 4,000 psi, and steel Grade 60 (fy = 60,000 psi). For design loads assume dead load wd = 30 lb/ft? (excluding self-weight) and live load we = 100 lb/ft. Finally assume that the steel percentage ratio is equal to p= 0.18fc/fy. Design an interior one-way simply supported slab with a 15 ft span using the above assumptions. Show sketches of one-way slab cross section, including reinforcing...
Problem 3 Assume normal concrete weight (wc = 143 lb/ft) with specified compressive strength fc = 4,000 psi, and steel Grade 60 (fy = 60,000 psi). For design loads assume dead load wd = 30 lb/ft? (excluding self-weight) and live load wų = 100 lb/ft. Finally assume that the steel percentage ratio is equal to p= 0.18fc'/fy. Design an interior one-way simply supported slab with a 15 ft span using the above assumptions. Show sketches of one-way slab cross section,...
Most questions answered within 3 hours.
-
Industry: Telecommunications in India
Here, you need to discuss the sources of the growth pattern
and...
asked 41 minutes ago -
Hydrobromic acid
dissolves solid iron according to the followiaung reaction:
Fe(s)+2HBr(aq)→
FeBr2(aq)+ H2(g)
Part A. What...
asked 2 hours ago -
Verify the following vector identity in SPHERICAL
COORDINATES.
div(curl(A)) = 0
asked 4 hours ago -
The work function (Φ) for a metal is 7.50×10-19 J.
What is the longest wavelength (nm)...
asked 4 hours ago -
1. Would the following procedural changes cause the
calculated mass percent Ni2+ ion in Ni(NH3)nCl2 to...
asked 6 hours ago -
1. Why does the voltage of the capacitor vary with frequency?
where does this missing voltage...
asked 7 hours ago -
p p please write each step out clearly
3. A manager of a company is considering...
asked 6 hours ago -
On October 1, Ebony Ernst organized Ernst Consulting; on October
3, the owner contributed $83,540 in...
asked 7 hours ago -
A.)As an electron moves through a region of space, its speed
decreases from 9.60 × 106...
asked 7 hours ago -
In java with the netbeans program do:
Through object programming
Create a class "ContadorP", which is...
asked 7 hours ago -
Pattern Corporation acquired all of Science
Company's outstanding stock on January 1, 2016 for $600,000 cash....
asked 7 hours ago -
Here are all accounts Tyler Co. maintains.
Tax expenses $4,750
Common stocks $48,840
SG&A expenses $2,500...
asked 8 hours ago